Mitsubishi Tx20u Projector User Manual

Basic operation (continued)
EN-21
AUTO POSITION button
When the image isn’t projected in the right position with 
Computer selected as the input source, follow the 
procedure below.
1. Project an image containing a lot of characters with-
out black areas. (For example, display a window
containing a lot of characters in the full-screen
mode.)
2. If the screen saver is running, turn it off.
3. Press the AUTO POSITION button.
 If the image is still not in the right position, adjust
the image position using...

EN-22
Basic operation (continued)
- VIDEO ONLY:
Signals supplied from video devices only are 
displayed at 16:9. 
To cancel the menu:
6. Press the MENU button.
Important:
 When a 16:9 image is kept displayed for a long time
before displaying 4:3 image, the afterimages of the
black bars may appear on the 4:3 image screen.
Consult your dealer in this case.
When connecting to a laptop 
computer:
When the projector is connected to a laptop computer, 
images may not be projected in some cases. In such 
cases,...

Basic operation (continued)
EN-23
9. If the contents are not projected correctly, repeat
step 1 to 5, press the W or X button to select 3D
FORMAT and switch 3D SYNC INVERT to ON.
Important:
 You cannot project the 3D content from the input
source LAN DISPLAY, USB DISPLAY, and USB
VIEWER.
 You can select the 3D setting also by using the 3D
button on the remote control. Press the 3D button to
select the setting and press the ENTER button.
 Even when the 3D option is set to AUTO   and a 3D
image is inputted...

EN-24
You can make various settings using the displayed menus.
Following 6 menus are displayed.
IMAGE menu (pages 26 and 27) INSTALLATION menu (pages 27 and 
28)FEATURE menu (page 29) 
SIGNAL menu (pages 30 and 31) NETWORK menu (page 32) INFORMATION menu (page 34) 
Menu operation 

Menu operation (continued)
EN-25
How to set the menus
1. Press the MENU button. 
 The menu selection bar is displayed appears on the screen.
2. Press the  W or X button to select a menu to use. 
3. Press the ENTER button (or T button).
 The selected menu is displayed.
4. Press the S or T button to select an item to adjust. 
5. Set the selected item by pressing the W or X button. 
6. To cancel the menu, press the MENU button several times.
Important:
 When an item marked with “ ” is selected, pressing the...

EN-26
Menu operation (continued)
Menu items
Set the following items provided in the respective menus.
IMAGE menu
ITEM SETTING FUNCTION
COLOR ENHANCER AUTO Select to optimize the settings automatically depending on the input signal. 
(Select this option for normal use.)
PRESENTATION Select to make the displayed image look bright and crisp.
STANDARD Select to make the displayed image look natural.
THEATER This option, suitable for viewing movies, makes the displayed image look soft 
and smooth.
BLACK BOARD...

Menu operation (continued)
EN-27
IMAGE menu (continued)
 When the setting of COLOR ENHANCER or 3D is changed, the displayed image may be disturbed.
 When the COMPUTER1, COMPUTER2, HDMI1, HDMI2, LAN DISPLAY, USB DISPALY or USB VIEWER is selected as the input
source, COLOR and TINT can’t be adjusted.
 TINT is available only when the NTSC signal is input.
 INPUT LEVEL is unavailable when the digital signal is supplied from the YC
BCR/YPBPR terminal of the connected device.
 Captions are not displayed while...

EN-28
Menu operation (continued)
INSTALLATION menu (continued)
 Regardless the setting of LAMP MODE in the INSTALLATION menu, the STANDARD lamp mode is activated by default
whenever the projector is turned on. The LAMP MODE is set to either STANDARD or LOW depending on the setting last
selected, and you cannot switch the LAMP MODE in about one minute after the lamp is on.
 Furthermore, you cannot switch LAMP MODE LOW1 to LOW2 in about three minutes after the lamp is on.
 When the STANDBY MODE is set to...

Menu operation (continued)
EN-29
FEATURE menu
 CINEMA MODE can be adjusted only when a TV60, TV50, 480i or 576i signal is being displayed.
 The RESET ALL process may take some time to complete. ITEM SETTING FUNCTION
ASPECT NORMAL Input video signal is displayed at the max height or max width of the panel 
while its aspect ratio is maintained.
16:9
 Regardless of the type of input signal, image is displayed at 16:9 aspect 
ratio. Select to expand squeezed (or horizontally compressed) images 
such as DVD...

EN-30
Menu operation (continued)
SIGNAL menu
ITEM SETTING FUNCTION
MEMORY CALL
AUTO / MEMORY 1
  - 
MEMORY 8 
 
Use to select the setting of RESOLUTION (MEMORIZE) already saved. 
Impossible to select if no setting has been saved. AUTO is selected by 
default. It optimizes the signal format automatically depending on the type 
of video signal supplied from the computer. Press the ENTER button to clear 
the setting already saved.
RESOLUTION 
(MEMORIZE)The current resolution is displayed. To change the...