Mitsubishi Tx10u Projector User Manual

Network settings (continued)
EN-41
IP Address Settings
1. Display the IP CONFIG menu.
2. Press the S or T button to select IP ADDRESS.
3. Press the ENTER button.
• IP ADDRESS screen appears. 
4. Press the direction buttons to move the key cursor, 
select the numbers to enter, and press the ENTER 
button.
• Set the numeric value within the range from 0 to 
255. However, set the numeric value for the final 
octet within the range from 1 to 254.
 key: ............. Shifting the position of enter 
cursor to...

EN-42
Network settings (continued)
Enabling or disabling the AMX 
Device Discovery
Select this setting when using the AMX controller.
(See page 25 for menu setting.)
1. Display the NETWORK menu.
2. Press the S or T button to select AMX DEVICE 
DISCOVERY.
3. Press the ENTER button.
• AMX dialog appears. 
4. Press the W or X button to select ON   or OFF  .
5. Select the item to set, and press the ENTER button.
• To cancel the setting, press the MENU button.
• It may take some time to reflect the setting....

EN-43
Displaying a user-defined image 
during startup or muting
You can display your desired image as the startup 
screen (or splash screen). Using the menu, you can also 
use it as the background that is displayed while the 
video is muted or no signal is inputted.
Important:
• You can capture the computer images from the 
Computer1, Computer2 and HDMI input sources.
Procedure 
(See page 25 for menu setting.)
1. Select the input source COMPUTER1, COMPUTER2 
or HDMI.
2. Display your desired image.
3....

EN-44
Advanced features (continued)
• If the entered passwords don’t match, an error 
message will appear.
• To cancel the procedure, press the MENU button. 
To cancel the password function:
1. Display the FEATURE menu.
2. Press the S or T button to select PASSWORD 
FUNCTION.
3. Press the ENTER button.
• The screen for canceling the password function 
will appear.
4. Press the ENTER button.
• The screen for entering the password will appear.
5. Enter a 4 - 8 digit password using the S, X, T and 
W...

Advanced features (continued)
EN-45
Freeze
To stop the motion in the image temporarily (or to 
display a still image):
Press the FREEZE button on the remote control. 
• The image will freeze temporarily.
To resume the motion in the image:
Press the FREEZE button on the remote control again.
• The image will be unfrozen.
Important:
• Do not display a still picture for a long time because 
the afterimages may persist on the screen. (See 
page 53.)
Presentation timer
By pressing the TIMER button on the...

EN-46
Advanced features (continued)
Supervising and controlling by 
computer
You can supervise and control the projector’s operation 
using a personal computer via a LAN network. 
Major functions
ProjectorView Global+
Batch projector controlling / supervising application 
software
• Batch operation of stand-alone projector / multiple 
projectors
• Scheduling function to turn ON/OFF for each day of 
the week
• Checking each condition of the projector and 
detecting a theft
• Setting of the projector’s IP...

EN-47
Connection
For details of the connection, see “LAN control UTILITY operation manual” in the CD-ROM.
Configure the initial network settings first.
You can configure the initial settings using the projector menu (see pages 26 to 36) or ProjectorView Global+. For 
details of ProjectorView Global+, see “LAN control UTILITY operation manual” in the CD-ROM.
Using the User Manual
The User Manual for LAN Control Utility is prepared in the Portable Document Format (PDF) in the CD-ROM.
Opening the User...

EN-48
This projector is equipped with a lamp to project 
images. This lamp is a consumable. It may burn out or 
its brightness may decrease during use. In such cases, 
replace the lamp with a new one as soon as possible. 
Be sure to replace the lamp with a new lamp separately 
sold that is exclusive to this projector. Contact your 
dealer for purchase of the lamp.
Caution:
• Do not remove the lamp immediately after using the 
projector. You may get burned because the lamp is 
very hot after use.
• Before...

Lamp replacement (continued)
EN-49
B)When the projector is mounted to 
the ceiling
When removing the lamp unit from the projector 
mounted to the ceiling, never fail to use the lamp 
replacement attachment to protect yourself from glass 
fragments and so on.
In case that you pull a lamp out without using a lamp 
replacement attachment for some reason, such as to 
check the lamp, please dismount the projector from 
ceiling mounting holder to start the procedure with 
projector put on the table for safety...

EN-50
Lamp replacement (continued)
Interval of lamp replacement
The recommended interval of lamp replacement is 
about 6000 hours
*1*2 of consecutive use. Such interval 
differs depending on the operating environment and 
may be shorter than 6000 hours
*1*2.Decrease in 
luminescence and/or color br ightness indicates that the 
lamp needs to be replaced. When the lamp operation 
time exceeds 4500 hours
*1, the indicator will blink 
alternately between green and red (while the lamp is lit; 
when the lamp...