Mitsubishi Tx10u Projector User Manual

EN-31
SIGNAL menu (continued)
• Though horizontal strips may appear on the enlarged projected image, such symptom is not a malfunction.
• When you change the horizontal or vertical position to a large extent, noise may appear.
• The adjustable range of the vertical position varies depending on the type of the input signal. Though the image may stay in the 
same position even when the setting value is changed, such symptom is not a malfunction.
• SHUTTER will not work correctly during keystone...

EN-32
NETWORK menu
ITEM SETTING FUNCTION
PROJECTOR NAME
*****...  Set the name to identify the projector. Enter up to 15 characters (alphabets 
or numeric characters). (See page 39.)
NETWORK 
CERTIFICATIONON   / OFF Select whether to enable the network certification or not. Select ON for 
normal use. (See page 39.)
NETWORK 
PASSWORDENTER Set the password for the certification of PJLink™, ProjectorView Global+ 
and remote control via LAN. (See page 39.)
IP CONFIG
ENTER Select this setting for IP...

EN-33
INFORMATION menu
• You can display the INFORMATION menu also by pressing the INFO. button on the remote control. ITEM DESCRIPTION
LAMP TIME (LOW) This item shows the lamp operation time calculated based on that the LAMP MODE of LAMP is 
LOW.
• When the LAMP MODE is STANDARD, this item shows a longer lamp operating time than the 
actual time.
• When the lamp operating time is 0 to 10 hours, “0H” is displayed. The lamp operating time 
exceeding 10 hours is indicated by the actual hours.
• When the...

EN-34
To adjust the brightness (CONTRAST and BRIGHTNESS):
You can make adjustments for the brightness of the projected image using the menu.
(See page 25 for menu setting.)
1. Display the IMAGE menu.
2. Select CONTRAST or BRIGHTNESS by pressing the S or T button.
3. Adjust the selected item by pressing the W or X button.
To cancel the menu:
4. Press the MENU button.
CONTRAST
Select to adjust the contrast of the image. Every time the X button is pressed, the image becomes brighter and more 
clearly...

Image adjustment (continued)
EN-35
To adjust the tone of white (COLOR TEMP.): 
You can select a preset color temperature (white tone) using the menu.
(See page 25 for menu setting.)
1. Display the IMAGE menu.
2. Select COLOR TEMP. by pressing the S or T button.
3. Select your desired color temperature by pressing the W or X button.
To cancel the menu:
4. Press the MENU button.
To adjust the tone of white (To customize the color temperature):
To customize (and store) the color temperature to your...

EN-36
BrilliantColor™
Use this setting to make colors with medium brightness, such as yellow and the skin tone appear natural. Press the W 
button to decrease the value to lessen the effect. Press the X button to increase the value to heighten the effect. 
(BrilliantColor™ has no effect at value 0.)
• For more enhanced color reproduction, set BrilliantColor™ to 0. The white area of the color wheel is disabled, and 
you can reproduce true-color images.
GAMMA MODE
Use this item to set the gamma optimally....

EN-37
How to adjust the computer image
This projector automatically selects a proper signal format according to the type of video signal supplied from the 
computer. However, video signals from the computer may not be projected correctly depending on the types of the 
computer and images to be projected. In such a case, make adjustment according to the flowchart below.
Adjustment is completed. When the size and position of 
the computer image are not correct. 
Project a bright computer image containing...

EN-38
How to adjust the image supplied from the computer using the menu:
Carry out the following procedures according to the symptoms.
1. Display the SIGNAL menu.
2. Press the S or T button to select a setting to adjust.
3. Adjust the selected setting by pressing the W or X button.
To cancel the menu:
4. Press the MENU button.
• Do not change the settings of the Signal menu for ordinary use.
LPF (Progressive filter) 
You can select whether or not to enable the LPF. Vertical or horizontal streak noise may...

EN-39
You can set the network of the projector using the 
menu.
Setting Projector Name
(See page 25 for menu setting.)
1. Display the NETWORK menu
2. Press the S or T button to select PROJECTOR 
NAME.
3. Press the ENTER button.
• The PROJECTOR NAME screen appears.
4. Press the direction buttons to move the key cursor, 
select the characters or marks to enter, and press 
the ENTER button.
• Projector Name can be set using up to 15 
characters including alphabets (capital/small), 
numeric characters, or...

EN-40
Network settings (continued)
 key:.............. Shifting the position of enter 
cursor to the left for each 
character.
 key:.............. Shifting the position of enter 
cursor to the right for each 
character.
DEL key: .......... Deleting the character in the 
position of enter cursor for each 
character.
caps/CAPS key:Switching an alphabet character 
to CAPITAL or small.
NEXT/PREV key:Switching the marks listed on the 
fourth line.
CLEAR key: ..... Deleting all the entered 
characters.
• The...