Mitsubishi Tx10u Projector User Manual

EN-21
AUTO POSITION button
When the image isn’t projected in the right position with 
Computer selected as the input source, follow the 
procedure below.
1. Project an image containing a lot of characters with-
out black areas. (For example, display a window 
containing a lot of characters in the full-screen 
mode.)
2. If the screen saver is running, turn it off.
3. Press the AUTO POSITION button.
• If the image is still not in the right position, adjust 
the image position using the SIGNAL menu. See...

EN-22
- VIDEO ONLY:
Signals supplied from video devices only are 
displayed at 16:9.
To cancel the menu:
6. Press the MENU button.
Important:
• When a 16:9 image is kept displayed for a long time 
before displaying 4:3 image, the afterimages of the 
black bars may appear on the 4:3 image screen. 
Consult your dealer in this case.
When connecting to a laptop 
computer:
When the projector is connected to a laptop computer, 
images may not be projected in some cases. In such 
cases, set the computer so that...

EN-23
9. If the contents are not projected correctly, repeat 
step 1 to 5, press the W or X button to select 3D 
FORMAT and switch 3D SYNC INVERT to ON.
Important:
• You can select the 3D setting also by using the 3D 
button on the remote control. Press the 3D button to 
select the setting and press the ENTER button.
• Even when the 3D option is set to AUTO   and a 3D 
image is inputted from the HDMI terminal, the 3D 
image is not displayed if the input signal does not 
include the 3D identification...

EN-24
You can make various settings using the displayed menus.
Following 6 menus are displayed.
IMAGE menu (pages 26 and 27)INSTALLATION menu (pages 27 and 
28)FEATURE menu (page 29)
SIGNAL menu (pages 30 and 31)NETWORK menu (page 32)INFORMATION menu (page 33)
Menu operation 

Menu operation (continued)
EN-25
How to set the menus
1. Press the MENU button. 
• The menu selection bar is displayed appears on the screen.
2. Press the  W or X button to select a menu to use. 
3. Press the ENTER button (or T button).
• The selected menu is displayed.
4. Press the S or T button to select an item to adjust. 
5. Set the selected item by pressing the W or X button. 
6. To cancel the menu, press the MENU button several times.
Important:
• When an item marked with “ ” is selected, pressing...

EN-26
Menu items
Set the following items provided in the respective menus.
IMAGE menu
ITEM SETTING FUNCTION
COLOR ENHANCER AUTO Select to optimize the settings automatically depending on the input signal. 
(Select this option for normal use.)
PRESENTATION Select to make the displayed image look bright and crisp.
STANDARD Select to make the displayed image look natural.
THEATER This option, suitable for viewing movies, makes the displayed image look soft 
and smooth.
BLACK BOARD Reproduces natural color...

EN-27
IMAGE menu (continued)
• When the setting of COLOR ENHANCER or 3D is changed, the displayed image may be disturbed.
• When the COMPUTER1, COMPUTER2 or HDMI is selected as the input source, COLOR and TINT can’t be adjusted.
• TINT is available only when the NTSC signal is input.
• INPUT LEVEL is unavailable when the digital signal is supplied from the YC
BCR/YPBPR terminal of the connected device.
• Captions are not displayed while information about the menu or input signal selection is being...

EN-28
INSTALLATION menu (continued)
• Regardless the setting of LAMP MODE in the INSTALLATION menu, the STANDARD lamp mode is activated by default 
whenever the projector is turned on. The LAMP MODE is set to either STANDARD or LOW depending on the setting last 
selected, and you cannot switch the LAMP MODE in about one minute after the lamp is on.
• When the STANDBY MODE is set to STANDARD, the audio is inputted from AUDIO IN terminal output during standby mode. 
However, no audio is output when the...

EN-29
FEATURE menu
• CINEMA MODE can be adjusted only when a TV60, TV50, 480i or 576i signal is being displayed.
• The RESET ALL process may take some time to complete. ITEM SETTING FUNCTION
ASPECT NORMAL Input video signal is displayed at the max height or max width of the panel 
while its aspect ratio is maintained.
16:9 Regardless of the type of input signal, image is displayed at 16:9 aspect 
ratio. Select to expand squeezed (or horizontally compressed) images 
such as DVD images to 16:9. Press the...

EN-30
SIGNAL menu
ITEM SETTING FUNCTION
MEMORY CALL
AUTO / MEMORY 1   - 
MEMORY 8 Use to select the setting of RESOLUTION (MEMORIZE) already saved. 
Impossible to select if no setting has been saved. AUTO is selected by 
default. It optimizes the signal format automatically depending on the type 
of video signal supplied from the computer. Press the ENTER button to clear 
the setting already saved.
RESOLUTION 
(MEMORIZE)The current resolution is displayed. To change the current setting, press the 
ENTER...