Home > Mitsubishi > Projector > Mitsubishi Projector Xd200u User Manual

Mitsubishi Projector Xd200u User Manual

Here you can view all the pages of manual Mitsubishi Projector Xd200u User Manual. The Mitsubishi manuals for Projector are available online for free. You can easily download all the documents as PDF.

Page 21

EN – 21
ENGLISH
Mouse remote control
By connecting to personal computer through the USB or PS/2 port, you can operate your computer with the
projector remote control.
Connection
Projector + PC through USB connector
Operation
POWER MUTE
COMPUTERVIDEO
MOUSE LASER
R-CLICK
Right clickThis operates in the same way as the 
right button on the computer mouse.
Mouse pointerUse to move the cursor on the image, 
instead of the computer mouse.
MouseWhen pressing this button, it 
illuminates.  Mouse pointer/...

Page 22

EN – 22
When the lamp no longer functions, replace it with a
new one.
Caution:
•Do not remove the lamp immediately after turn-
ing off the projector, the high temperature of the
lamp can burn you.
•For lamp replacement, press the power button to
power off, then wait for 120 seconds in stand-by
mode to allow the lamp to cool. Then turn off  the
main switch,  unplug the power cord from the
outlet, and wait one hour so that the lamp is
cooled to the touch.
•Do not remove the lamp except for replacement....

Page 23

EN – 23
ENGLISH
Indicators
The projector has two LED Indicators which show the
working condition of the projector.
The below table offers solutions to possible problems.
If a problem persists, turn the projector off and consult
your dealer.
Normal condition
Abnormal condition
Steady 
red
Steady 
green
Steady 
greenBlinking
green
Steady 
green
PowerSTATUS CONDITION Notes
The POWER is ON. (Normal condition) Lamp stand-by (about for 1 minute) The power button cannot be used to switch
ON and OFF Stand-by...

Page 24

EN – 24
Troubleshooting
The following offers solutions to some of the common problems you may encounter. We suggest that you consult
this chart before contacting your dealer.
CAUSE
•The air inlet grille, outlet grille  or air filter is
clogged with dust or some other obstruction.
POWER indicator does not light up.
•Power cord is unplugged from the outlet.
•Power cord is disconnected from the projector.
•The main switch is turned off.
•The lamp lid is open.
Power indicator blinks red.
•The projector has...

Page 25

EN – 25
ENGLISH
Kensington Lock
This projector has a Kensington Security Standard connector for use with a Kensington MicroSaver Security
System. Refer to the information that came with the Kensington System for instructions on how to use it to
secure the projector. Please contact to Kensington Technology Group as shown below.
Kensington Technology Group
2855 Campus Drive
San Mateo, CA 94403, U.S.A.
Phone : (650)572-2700 Fax : (650)572-9675
Specifications
DLP™ DATA projector
XD200U | SD200U
AC100V -...

Page 26

EN – 26
Specifications (continued)
Connectors
PC analog RGB input
Use to input video signals
(analog RGB) of a personal
computer.
(Pin assignment of Mini D-SUB 15P jack)
PIN NO. SPEC PIN NO. SPEC
1 R(RED)/CR9–
2G(GREEN)/Y10 GROUND
3B(BLUE)/CB11 GROUND
4 GROUND 12 DDC-DATA
5 GROUND 13 HD/CS
6 GROUND 14 VD
7 GROUND 15 DDC-CLK
8 GROUND
1 5
116 10
15RS-232C input
Use to control the projector with the
personal computer, or control the
personal computer with remote control.
Use the RS-232C cable (Mini DIN 9P-...

Page 27

EN – 27
ENGLISH
Specification of RGB signals in each computer mode of the projector (For XD200U)
•When the EXPAND MODE of FEATURE menu is
set to real screen display, by pressing the EX-
PAND button on the remote control, it will switch
to the screen displaying the picture as its original
size (real screen display).  In the real screen
display, pictures will be black-framed when
picture resolution is lower than 1,024 x 768.
Important:
•Some computers may not be compatible with the
projector.
•The...

Page 28

EN – 28
Specification of RGB signals in each computer mode of the projector (For SD200U)
•When the EXPAND MODE of FEATURE menu is
set to real screen display, by pressing the EX-
PAND button on the remote control, it will switch
to the screen displaying the picture as its original
size (real screen display).  In the real screen
display, pictures will be black-framed when
picture resolution is lower than 800 x 600.
Important:
•Some computers may not be compatible with the
projector.
•The projectors maximum...

Page 29


				            

Page 30

Printed in Japan 871D349A10
Manufactured by Mitsubishi Electric Corporation
1 Zusho Baba, Nagaokakyo-City, Kyoto Japan 
Start reading Mitsubishi Projector Xd200u User Manual

Related Manuals for Mitsubishi Projector Xd200u User Manual

All Mitsubishi manuals