Mitsubishi Projector Xd200u User Manual
Here you can view all the pages of manual Mitsubishi Projector Xd200u User Manual. The Mitsubishi manuals for Projector are available online for free. You can easily download all the documents as PDF.
Page 21
EN – 21 ENGLISH Mouse remote control By connecting to personal computer through the USB or PS/2 port, you can operate your computer with the projector remote control. Connection Projector + PC through USB connector Operation POWER MUTE COMPUTERVIDEO MOUSE LASER R-CLICK Right clickThis operates in the same way as the right button on the computer mouse. Mouse pointerUse to move the cursor on the image, instead of the computer mouse. MouseWhen pressing this button, it illuminates. Mouse pointer/...
Page 22
EN – 22 When the lamp no longer functions, replace it with a new one. Caution: •Do not remove the lamp immediately after turn- ing off the projector, the high temperature of the lamp can burn you. •For lamp replacement, press the power button to power off, then wait for 120 seconds in stand-by mode to allow the lamp to cool. Then turn off the main switch, unplug the power cord from the outlet, and wait one hour so that the lamp is cooled to the touch. •Do not remove the lamp except for replacement....
Page 23
EN – 23 ENGLISH Indicators The projector has two LED Indicators which show the working condition of the projector. The below table offers solutions to possible problems. If a problem persists, turn the projector off and consult your dealer. Normal condition Abnormal condition Steady red Steady green Steady greenBlinking green Steady green PowerSTATUS CONDITION Notes The POWER is ON. (Normal condition) Lamp stand-by (about for 1 minute) The power button cannot be used to switch ON and OFF Stand-by...
Page 24
EN – 24 Troubleshooting The following offers solutions to some of the common problems you may encounter. We suggest that you consult this chart before contacting your dealer. CAUSE •The air inlet grille, outlet grille or air filter is clogged with dust or some other obstruction. POWER indicator does not light up. •Power cord is unplugged from the outlet. •Power cord is disconnected from the projector. •The main switch is turned off. •The lamp lid is open. Power indicator blinks red. •The projector has...
Page 25
EN – 25 ENGLISH Kensington Lock This projector has a Kensington Security Standard connector for use with a Kensington MicroSaver Security System. Refer to the information that came with the Kensington System for instructions on how to use it to secure the projector. Please contact to Kensington Technology Group as shown below. Kensington Technology Group 2855 Campus Drive San Mateo, CA 94403, U.S.A. Phone : (650)572-2700 Fax : (650)572-9675 Specifications DLP™ DATA projector XD200U | SD200U AC100V -...
Page 26
EN – 26 Specifications (continued) Connectors PC analog RGB input Use to input video signals (analog RGB) of a personal computer. (Pin assignment of Mini D-SUB 15P jack) PIN NO. SPEC PIN NO. SPEC 1 R(RED)/CR9– 2G(GREEN)/Y10 GROUND 3B(BLUE)/CB11 GROUND 4 GROUND 12 DDC-DATA 5 GROUND 13 HD/CS 6 GROUND 14 VD 7 GROUND 15 DDC-CLK 8 GROUND 1 5 116 10 15RS-232C input Use to control the projector with the personal computer, or control the personal computer with remote control. Use the RS-232C cable (Mini DIN 9P-...
Page 27
EN – 27 ENGLISH Specification of RGB signals in each computer mode of the projector (For XD200U) •When the EXPAND MODE of FEATURE menu is set to real screen display, by pressing the EX- PAND button on the remote control, it will switch to the screen displaying the picture as its original size (real screen display). In the real screen display, pictures will be black-framed when picture resolution is lower than 1,024 x 768. Important: •Some computers may not be compatible with the projector. •The...
Page 28
EN – 28 Specification of RGB signals in each computer mode of the projector (For SD200U) •When the EXPAND MODE of FEATURE menu is set to real screen display, by pressing the EX- PAND button on the remote control, it will switch to the screen displaying the picture as its original size (real screen display). In the real screen display, pictures will be black-framed when picture resolution is lower than 800 x 600. Important: •Some computers may not be compatible with the projector. •The projectors maximum...
Page 30
Printed in Japan 871D349A10 Manufactured by Mitsubishi Electric Corporation 1 Zusho Baba, Nagaokakyo-City, Kyoto Japan