Mitsubishi Projector Xd200u User Manual
Here you can view all the pages of manual Mitsubishi Projector Xd200u User Manual. The Mitsubishi manuals for Projector are available online for free. You can easily download all the documents as PDF.
Page 11
EN – 11 ENGLISH COMPUTER OUTCOMPUTER 2 / COMPONENT IN COMPUTER 1 IN COMPUTER AUDIO IN VIDEO 1 INVIDEO 2 IN S-VIDEO VIDEO AUDIO AC INAUDIO OUTMAIN MOUSE /RS-232C AUDIO OUT MONITOR OUTPUT to COMPUTER (1or2) IN to AUDIO INto monitor port to COMPUTER OUT to PC audio output Audio cable (option) When outputting to both a PC monitor and the projector.RGB cable for PC RGB cable for PC (option) computer Projector + Personal computer Important: •When you use a long RGB cable instead of the cable provided,...
Page 12
EN – 12 Front adjustment feet Screen Preparing the projector for operation Getting ready for projection 1. Connect the power cord provided to the projector. 2. Connect the power cord to the wall power outlet. 3. Remove the lens cap. Warning: •Do not look directly into the lens when projector is “ON”. •The lens cap is for protecting the lens. If you leave the power on with the cap on, the cap may be warped. Please remove the lens cap when you turn the power on. •This projector is equipped with the power...
Page 13
EN – 13 ENGLISH To operate projector power ON • The picture might not be of optimum performance in extreme hot or cold conditions. (The projector is not malfunctioning.) 4. Select the desired external input source by using the COMPUTER or VIDEO button. • The COMPUTER or VIDEO button does not work when MENU is displayed. At this time, the prohibi- tion mark ( ) appeares on the screen. • The projector automatically selects the appropriate signal format. The selected signal format is dis- played on the...
Page 14
EN – 14 To operate projector power ON (Continue) Turning off the projector 7. Press the POWER button. The message “POWER OFF? YES : PRESS AGAIN” appears on the screen. 8. Press the POWER button within 10 seconds again. •The light source lamp will be turned off. •When the POWER button is not pressed within 10 seconds, the message will be disappeared. •Pressing the POWER button second time will shut off the light source lamp, but the exhaust fan con- tinues to operate for 120 seconds to cool down the...
Page 15
EN – 15
ENGLISH
Basic operation
Several settings can be adjusted using Menu.
EXAMPLE: Auto power off time setting
1. Press the MENU button.
2. Press the $ or % button to select the INSTALLA-
TION menu.
3. Press the ENTER button (or } button).4. Press the { or } button to select AUTO POWER
OFF.
5. Press the $ or % button to adjust auto power off
time.
6. Exit the menu system by pressing the MENU but-
ton several times.
• If the menu operation is not working, turn off the
main power, wait about 10...
Page 16
EN – 16 MENU POSITIONUPPER LEFT EXPAND MODEEXPAND VIDEO MODE 1 CINEMA MODE VIDEO SIGNAL AUTO LANGUAGE English RESET ALLOK Opt FEATURE AA AË ? TV60 AUTO opt. INSTALLATION TV60 ON AUTO POWER ON AUTO POWER OFF SPLASH SCREEN BACK COLOR IMAGE REVERSEOFF OFF OFFON BLUE CONTRAST sRGBBRIGHTNESS COLOR MATRIX COLOR TEMP COLORTINT SHARPNESS0 0 0 0 0 OFF OFF STANDARD opt. IMAGE TV60 Menu operation (continued) 1 IMAGE CONTRAST ........Adjusts the picture contrast. The contrast becomes higher as the number increases....
Page 17
EN – 17 ENGLISH CLAMP POSITION opt.XGA60 SIGNAL SIGNAL - USER 0 CLAMP WIDTH0 VERT.SYNCAUTO SHUTTER (U)0 SHUTTER (L)0 SHUTTER (LS)0 SHUTTER (RS)0 CLAMPCLAMP CLAMPCLAMP ? HORIZ.POSITION opt.XGA60 SIGNAL R G BR G B VERT.POSITION TRACKING FINE SYNC COMPUTER INPUT HOLDANAMORPHIC USER0 0 0 0 RGB OFFON OK CINEMA MODE .. When ON is selected, the film mode will be automatically activated when a film source signal is inputted. When OFF is selected, the film mode will not be activated. VIDEO SIGNAL ... When AUTO...
Page 18
EN – 18 Adjusting the image You can adjust the picture by using the IMAGE menu. To control the level of white-to-black in the image : Adjust CONTRAST in the IMAGE menu. Press the % button to increase the contrast and the $ button to reduce it. To control the light level of the image : Adjust BRIGHTNESS in the IMAGE menu. Press the % button to lighten the image and the $ button to darken the image. To adjust the red-green color balance of the image : Adjust TINT in the IMAGE menu. Press the % button to...
Page 19
EN – 19 ENGLISH Adjustment from personal computer This projector should automatically display the full computer image on the projection screen. However, with some computers signals this may not occur, in this case press the AUTO POSITION button. If the images are still not projected correctly, use the MENU display to adjust the projected images. HORIZ.POSITION opt.XGA60 SIGNAL R G BR G B VERT.POSITION TRACKING FINE SYNC COMPUTER INPUT HOLDANAMORPHIC USER0 0 0 0 RGB OFFON OK Top part of image curves :...
Page 20
EN – 20
Advanced features for presentation
Expand
By pressing the EXPAND button on the remote con-
trol, you can magnify the detailed image of the picture.
Using the Expand mode
1. Press the EXPAND button.
• You can magnify different areas of the active pic-
ture by pressing the {, }, $, % button.
• You can change the magnification of the zoomed area
by pressing the + or - button.
2. Press the EXPAND button on the remote control
again.
The normal screen display will appear on the screen.
• Display...