Mitsubishi Hc2000 Projector User Manual

EN-31
ENGLISH
5. Pull the lamp out of the projector by the handle.
•Pull the lamp out of the projector slowly and carefully.
When the bulb has exploded, rough removal of the
lamp may cause glass fragments to scatter.
•Do not spill water on the lamp, or do not place it
where children can reach or near flammables. You
may get burned or injured.
6. Hold the handle of the new lamp and insert the lamp in
the opening in the projector to the end in the correct
orientation.
7. Press the handle into its storing...

EN-32
Cleaning
Be sure to turn off the main power switch and unplug the power cord before you start  cleaning.
To clean the filter:
Clean the filter as frequently as possible (or once per month). Dust collecting on the filter of the intake vent may
cause the temperature inside the projector to abnormally rise, damaging the parts inside and affecting the
projector’s lifetime, resulting in a breakdown.
•When the temperature inside the projector abnormally rises, the TEMP indicator starts blinking red, the...

EN-33
ENGLISH


3-M6
226
100
430
143 77
200
364
185
307
135 65
1543228 48
ø64
Asking for installation
To view images projected by the ceiling-
mounted projector from the front:
When the projector is installed on the ceiling, the
special ceiling mount bracket, which is separately
sold, is required. Be sure to ask a certified
installation specialist for installation of the
projector. Contact your dealer for details.
•Mitsubishi assumes no responsibilities for any
damage caused by use of other...

EN-34
à
á
à
á
à
á
à
á
à
á
-.1

0GG

0O
JO
SFE
5&.1

0GG

#MJOLJOH

JO
PSBOHF

0O
JO

PSBOHF

0GG
108&3

0GG

#MJOLJOH
JO
SFE

#MJOLJOH
JO
SFE

0O
JO
SFE

#MJOLJOH
JO
SFE

#MJOLJOH
JO
SFE
4PMVUJPO


K Connect the power cable to the projector.

K Plug the power plug in the wall outlet.

K Turn on the main power switch.

K Fit the lamp cover. 

K When the projector is hot, turn off the POWER switch. Wait for the projector 
to cool down, and then turn on the power switch again. 

K After the POWER...

EN-35
ENGLISH
Images are not displayed correctly.
Problem
Projected images are
distorted.
Projected images are
dark.
Projected images are
blurred.
White dots are seen
on projected images.
Black dots are seen
on projected images.
Rainbow effect is
seen on projected
images.
Fine streaks are seen
on projected images.
Projected images
become wavy.
Hue is not
appropriate.Solution
•Adjust the projector and the screen so that they are perpendicular to each other.
(See Page 11.)
•Adjust BRIGHTNESS and CONTRAST...

EN-36
Specifications
The specifications and outside appearance of the projector are subject to change without prior notice.
Model
Projection system
Optical system
Mirror reflection
system
SizeResolution
Projection lens
Focal distance
Light-source lamp
Image size (Projection distance)
Maximum number of display colors
Maximum
resolutionComputer
sugnal
Video signal
Component
signal
Computer input
Video input
Control terminal/Others
Operating temperatures
Rated voltage
Power consumption
Dimentions
Weight...

EN-37
ENGLISH
Type of connectable signals
1
695
1724
16 9
8
1
C3C4
C5
C2
C1
1724
9
8
1 16
Input signalScreen size
Signal
representationResolution Horizontal sync
frequency (kHz)Vertical sync
frequency (Hz)Real display
(H x V)
*1 ) Analog input only
Important:
•The maximum resolution supported by this projector is 1280x720. Signals having a higher resolution than
this are not projected with their original resolution.
•In the case of a signal having a resolution and sync frequency other than those...

North America
MESCA (Mitsubishi Electric Sales Canada Inc.)
http://www.mitsubishielectric.ca
Information Technologies Group, 4299 14th Avenue, Markham, Ontario L3R
0J2, Canada
Sales Phone :+1-(905) 475-7728
Fax :+1-(905) 475-7958
E-mail :[email protected]
Technical Phone :+1-(905) 475-7728
Fax :+1-(905) 475-7958
Customer Care
E-mail :[email protected]
MDEA (Mitsubishi Digital Electronics America, Inc.)
(Warranty Registration)
http://www.mitsubishi-presentations.com/...