Mitsubishi Hc2000 Projector User Manual
Here you can view all the pages of manual Mitsubishi Hc2000 Projector User Manual. The Mitsubishi manuals for Projector are available online for free. You can easily download all the documents as PDF.
Page 21
EN-21 ENGLISH AUTO MENU DVI-DCOMP BNC ZOOM MEM3 S-Video OFF Video DVI-A 16:9 MEM2 ENTER FOCUS–/LEFT FOCUS+/RIGHTZOOM IN/UP ZOOM OUT/DOWN LIGHT Standard MEM1 CONTBRIGHTC.TEMP TINTCOLORSHARP LAMP AC IN MAIN TEMP POWER ONSTANDBY To stop projecting: 9. Press the POWER button on the projector or the OFF button on the remote control. •A confirmation message is displayed. •To cancel the procedure, leave the projector for a while or press the MENU button on the remote control or the MENU/ EXIT button on the...
Page 22
EN-22 PICTURE CONTRAST -50 - +50 BRIGHTNESS-50 - +50 USER 2 COLOR TEMP. COLOR-50 - +50 TINT-50 - +50 SHARPNESS0 - 4 µ50™+50 µ50™+50 µ50™+50 µ50™+50PRO PICTURE OPTION SAVE MEMORY TRANSPARENT MENU MENU POSITION LANGUAGE OFF/3.75%/7.5% THEATER1/THEATER2/STANDARD -2/-1/OFF/+1/+2 ON/OFF BLUE/BLACK YES/NO NORMAL/LOW OK/CANCEL UPPER LEFT/UPPER RIGHT/ LOWER RIGHT/LOWER LEFT/ CENTER BACK COLOR LAMP HOUR RESET SETTING LAMP MODE 0 - 10 -50 - +50 HIGH BRIGHTNESS WHITE ENHANCE 6500K R GAIN G GAIN B GAIN...
Page 23
EN-23
ENGLISH
How to set the menus:
Following describe how to set Vertical Location as
an example.
1. Press the MENU button.
The top menu appears.
•When no signal is input, the top menu does
not appear.
2. Press the { or } button to select a menu to use.
3. Press the ENTER button.
The item at the top is selected.
4. Press the { or } button to select an item to
adjust.
•To set items marked with
, press the $ or
% button.
5. Press the ENTER button.
•The submenu appears.
PICTURE
CONTRAST
BRIGHTNESS
COLOR
0...
Page 24
EN-24 PICTURE CONTRAST BRIGHTNESS COLOR 0 0 0 0 0 0 TINT SHARPNESS WHITE ENHANCE opt. PRO PICTURE COLOR TEMP. GAMMA SET UP OFF OFF THEATER1 BLACK STRETSCH DISPLAY POSITION opt. OPTION SAVE MEMORY TRANSPARENT MENU MENU POSITION NORMALOFF BLACK UPPER LEFTOFF BACK COLOR LAMP HOUR LAMP MODE RESET SETTING opt. INSTALLATION TEST PATTERN SIGNAL SETTING COMPONENT FLOOR FRONTSTANDARD 0 ENGLISHAUTO ASPECT MIRROR KEYSTONE LANGUAGE EXPAND opt. Menu operation (continued) Available settings in the menus Set the...
Page 25
EN-25 ENGLISH 4. Installation Menu ITEM SETTING FUNCTION TEST PATTERN The test pattern for focus adjustment is displayed when the ENTER button is pressed. SIGNAL SETTINGUse to adjust the image supplied from the computer. TRACKING Use to eliminate vertical wide stripes, if appears, viewing the projected image. FINE SYNC. Use to eliminate flickering or blur, if appears, viewing the projected image. H.POSITION * Use to adjust the horizontal position of the projected image. V.POSITION * Use to adjust the...
Page 26
EN-26 OPTION SAVE MEMORY TRANSPARENT MENU MENU POSITION NORMALOFF BLACK UPPER LEFTOFF BACK COLOR LAMP HOUR LAMP MODE RESET SETTING opt. SAVE MEMORY MEMORY2 MEMORY3 MEMORY Reset MEMORY1 Menu operation (continued) To store the image quality settings: You can store up to 3 patterns of the image quality setting, which consists of the settings of the PICTURE menu and the PRO PICTURE menu (excluding COLOR TEMP.) per group of input signals. (See the table on the right.) To store the settings: (See Page 23 for...
Page 27
EN-27
ENGLISH
CONTRAST
BRIGHTNESS
0 0
COLOR
0 0
TINT
0
SHARPNESS
0
WHITE ENHANCE
Adjusting projected images
To adjust the brightness (CONTRAST and BRIGHTNESS):
You can make adjustments for the brightness of the projected image using the menu.
(See Page 23 for menu setting.)
1. Display the PICTURE menu.
2. Select CONTRAST or BRIGHTNESS by pressing the { or } button.
3. Adjust the selected item by pressing the $ or % button.
To cancel the menu:
4. Press the MENU button.
CONTRAST
Select to adjust the...
Page 28
EN-28
Adjusting projected images (continued)
COLOR TEMP.
To adjust the tone of white (COLOR TEMP.):
You can select a preset color temperature (white tone) using the menu.
(See Page 23 for menu setting.)
1. Display the PRO PICTURE menu.
2. Select COLOR TEMP. by pressing the { or } button.
3. Select your desired color temperature by pressing the { or } button.
•When you select SPECIAL, the color temperature which concerns the black-to-white balance is applied.
•Generally, select HIGH BRIGHTNESS for...
Page 29
EN-29 ENGLISH This projector automatically and properly projects video signals supplied from the computer. However, some video signals may not be projected, depending on the type of the computer. In such a case, press the AUTO POSITION button on the projector or the AUTO button on the remote control. (See Page 21.) When the signal is still not projected properly, adjust the projected image using the SIGNAL SETTING menu. How to adjust the image supplied from the computer using the menu: Carry out the...
Page 30
EN-30 (a) (b) Replacing the lamp This projector is equipped with a lamp to project images. This lamp is a consumable. It may burn out or its brightness may decrease during use. In such cases, replace the lamp with a new one as soon as possible. Be sure to replace the lamp with a new lamp separately sold that is exclusive to HC2000. Contact your dealer for purchase of the lamp. WARNING: •Be sure to turn off the main power switch and unplug the power cord from the wall outlet before replacing the lamp....