Mitsubishi Electric Lt 46151 Owners Guide

 Appendices 81
Reset NameWhen to UseHow to UseResulting Action
FormatWhen	the	picture	
shape	seems	
incorrect,	use	
MORE > 0 (FORMAT)	to	
change	the	shape	of	
the	picture.
Press	the	MORE	key	and	then	repeat-
edly	press	0	(F O R M AT)	to	cycle	
through	the	available	aspect	ratios.
The	last-used	format	for	a	signal	
type	is	memorized	for	each	
input.		The	next	time	the	same	
input	and	the	same	signal	type	is	
viewed,	the	last-used	format	will	
be	recalled.
PerfectColor™ 
Reset
or
PerfectColor™/...

82 Appendices
Reset NameWhen to UseHow to UseResulting Action
Channel 
Memorization
To	erase	and	
re-memorize	channels	
on	the	ANT input.
While	viewing	the	TV,	press	1. 
MENU	to	display	the	main	menu.
Navigate	to	the	2. Initial> Channel		
menu.
Press	3. ENTER.
Highlight	the	reception	mode,	4. 
e.g.	Ant Air.
Highlight	5. Scan.
Press	6. ENTER	to	start	channel	
memorization.
All	previously	memorized	chan-
nels	for	the	antenna	input	are	
erased	and	a	new	set	of	memo-
rized	channels	is	created.		To	
add	or...

 Appendices 83
Appendix E:  Troubleshooting, continued
General TV Operation
SymptomRemarks
	1.The	TV	remote	control	does	not	work.	Check	that	the	batteries	are	fresh	and	installed	correctly.•	
Check	that	the	control	mode	on	the	remote	is	set	to	TV.•	
Be	no	more	than	20	feet	from	the	TV	when	using	the	remote	control.•	
Program	the	remote	control	to	operate	the	TV	or	other	device.•	
Reset	the	remote	control.•	
	2.When	I	try	to	use	the	remote	control,	the	
POWER	key	blinks	five	times.
Replace	the...

84 Appendices
Appendix E:  Troubleshooting, continued
TV Power On/Off
SymptomRemarks
	1.TV	takes	an	excessively	long	time	to	power	
on.
When	powered	on,	the	TV	needs	time	to	boot	up,	just	as	•	
does	a	computer.
For	faster	power-up,	change	the	Energy	setting	to	Fast	•	
Power	On	(Initial	>	Energy	menu).		With	this	setting	the	TV’s		
power	usage	when	off	exceeds	ENERGY	STAR®	recom-
mended	levels	for	a	powered-down	device.
	2.You	cannot	program	the	TV	to	turn	on	auto-
matically	(Timer	function)
The	TV	may	be...

 Appendices 85
Appendix E:  Troubleshooting, continued
Picture
SymptomRemarks
	1.Picture	does	not	look	like	a	high-definition	
picture.
Not	all	signals	are	high-definition	signals.		To	receive	high-defini-
tion	programming	from	your	cable	or	satellite	provider,	you	must	
subscribe	to	the	provider’s	high-definition	service.			Some	over-
the-air	broadcasts	are	in	high-definition	and	can	be	received	with	
a	high-quality	antenna	suited	to	your	location.
	2.TV	has	sound	but	no	picture.Check	that	all	video...

86 Appendices
Appendix E:  Troubleshooting, continued
Sound 
SymptomRemarks
	2.The	sound	does	not	match	the	screen	
picture.
The	TV’s	“Listen	to:”	setting	may	be	set	to	SAP	(analog	program	from	
the	ANT	input).
	3.The	sound	from	my	A /V	receiver	does	
not	match	the	screen	picture	(I	should	
hear	the	correct	audio	from	my	A /V	
receiver).
Check	that	DIGITAL	AUDIO	OUTPUT	and/or	AVR	AUDIO	•	
OUTPUT	on	TV’s	main	panel	is	connected	to	the	A /V	receiver.
Without	this	connection,	devices	connected	only	to	the...

 Appendices 87
Appendix E:  Troubleshooting, continued
NetCommand IR Control (NetCommand-equipped models only)
SymptomRemarks
	3.The	A /V	receiver	is	the	selected	audio	source	
but	there	is	no	sound.
A /V	Receiver	Set	Up	for	Audio-Only	Switching•	
Check	to	see	if	the	A /V	Receiver	power	is	turned	on.	-
With	A /V	receiver	power	turned	on,	redisplay	the	Activ-	-
ity	menu	and	press	ENTER	to	allow	NetCommand	to	
correctly	select	the	A /V	Receiver	input.
Incorrect	setup	in	the	Inputs	>	AVR	menu.		Check	the...

88 Trademark and License Information
LICENSOR’S	SUPPLIERS	DO	NOT	MAKE	OR	PASS	ON	TO	END	USER	OR	ANY	OTHER	THIRD	PARTY,	ANY	
EXPRESS,	IMPLIED	OR	STATUTORY	WARRANTY	OR	REPRESENTATION	ON	BEHALF	OF	SUCH	SUPPLIERS,	
INCLUDING,	BUT	NOT	LIMITED	TO	THE	IMPLIED	WARRANTIES	OF	NON-INFRINGEMENT,	TITLE,	MERCHANTABIL-
ITY	OR	FITNESS	FOR	A	PARTICULAR	PURPOSE.
Manufactured	under	license	from	Cambridge	Mechatronics	Ltd.
Rapidfire	and	the	1...	logo	are	trademarks	of	Cambridge	Mechatronics	Ltd
Manufactured	under	license...

 Trademark and License Information 89
Mitsubishi TV Software
END-USER LICENSE AGREEMENT FOR EMBEDDED SOFTWARE
IMPORTANT – READ CAREFULLY:	This	License	Agreement	is	a	legal	agreement	between	you	(either	an	individual	or	an	entity)	and	
Mitsubishi	Digital	Electronics	America,	Inc.	(MDEA)	for	all	software	pre	installed	and/or	provided	along	with	this	television	(“Software”).		By	
utilizing	this	television	and	Software,	you	agree	to	be	bound	by	the	terms	of	this	License	Agreement.
The	Software	is	protected...

90 Trademark and License Information
GNU General Public License
Version 2, June 1991
Copyright	(C)	1989,	1991	 Free	Software	Foundation,	Inc.	 	 	 675	Mass	Ave,	Cambridge,	MA	02139,	USAEveryone	is	permitted	to	copy	and	distribute	verbatim	copies	of	this	license	document,	but	changing	it	is	not	allowed.
PreambleThe	licenses	for	most	software	are	designed	to	take	away	your	freedom	to	share	and	change	it.		By	contrast,	the	GNU	General	Public	License	is	intended	to	guarantee	your	freedom	to	share	and	change...