Mitsubishi Electric Ldt322v Users Manual

NOTE 1: IMAGE PERSISTENCE
Please be aware that LCD Technology may experience a phenomena known as Image Persistence. Image P\
ersistence occurs 
when residual or “ghost” image of a previous image remains visible on the screen. Unlike CRT monitors, LCD monitors’ 
image persistence is not permanent, but constant images being displayed \
for a long period of time should be avoided.
To alleviate image persistence, turn off the monitor for as long as the previous image was displayed. For example, if an...

English
:  Supported
:  Not supported
SUB
RGB1
RGB1
RGB2
RGB3
DVD/HD
VIDEO
VIDEO RGB2 RGB3 DVD/HD VIDEO
VIDEO
MAIN
AB
PIP
AB
POP
A
OFF
PIP SIZE SMALL
MIDDLE
LARGE: 320 dots X 240 dots
: 480 dots X 320 dots 
: 640 dots X 480 dots
: 320 dots X 240 dots
POP SIZE
“PIP”, “POP” mode resolution (Reference)
Press the “PIP ON/OFF” buttons on the remote control to change between “PIP” and “POP” mode 
as shown in the diagram below.
NOTE 3: “PIP” and “POP”
The following table shows the combination of signal inputs...

Controlling the LCD monitor via RS-232C Remote Control
This LCD monitor can be controlled by connecting a personal computer with a RS-232C terminal. 
Functions that can be controlled by a personal computer are:
•  Power ON or OFF
•  Switching between input signals
Connection
LCD Monitor + PC
NOTE:
If your PC (IBM or IBM compatible) is equipped only with a 25-pin seri\
al port connector, a 25-pin serial port adapter is required.  
Contact your dealer for details.
1) Interface
PROTOCOL
BAUD RATE
DATA...

English
3) Control sequence(1)  The command from a computer to the LCD monitor will be sent in 600 ms.
(2)  The LCD monitor will send a return command 600 ms* after it has received and encoded. If the command isn’t received correctly, the LCD monitor will not send the return command.
(3)  The personal computer checks the command and confi  rms if the command, which has been sent, has been executed or 
not.
(4)  This LCD monitor sends various codes other than return code. When having a control sequence by...

Reduced Footprint:
Provides the ideal solution for environments requiring superior image quality but with size and weight limitations. 
The monitor’s small footprint and low weight allow it to be moved or transported eas\
ily from one location to another.
Color Control Systems:
Allows you to adjust the colors on your screen and customize the color accuracy of your monitor to a variety of 
standards.
sRGB Color Control:
A new optimized color management standard which allows for color matching on computer...

English
Troubleshooting
No picture
•   The signal cable should be completely connected to the display card/computer.
•   The display card should be completely seated in its slot.
•   Front Power Switch and computer power switch should be in the ON position.\
•   Check to make sure that a supported mode has been selected on the display card or system being used.
  (Please consult display card or system manual to change graphics mode.)
•   Check the monitor and your display card with respect to...

No Sound
•  Check to see if speaker cable is properly connected.
•   Check to see if mute is activated.
•  Check to see if volume is set at minimum.
Remote Control is not available
•   Check the Remote Control’s batteries status.
•   Check if batteries are inserted correctly.
•   Check if the Remote Control is pointing at the monitor’s remote sensor.
“SCHEDULE”/“OFF TIMER” function is not working properly
•   The “SCHEDULE” function will be disabled when the “OFF TIMER”\
 is set.
•   If the “OFF TIMER”...

English
Specifi cations
Speci fi cations (LDT322V)
Product Specifications
LCD Module
Frequency
Pixel Clock
Viewable Size
Input Signal
 PC-Input:
 VIDEO Input:
 AUDIO Input:
 RS-232C:
Output Signal
 PC-Output:
 VIDEO Output:
 AUDIO Output:
 Speaker Output:
Resolutions Supported
Power Supply
Power Consumption
Operational
Environment
Storage
Environment
Dimension
Weight
VESA compatible arm
mounting interface
Complied Regulatory
and Guidelines
Power Management
Plug & Play
Accessories Diagonal:
Pixel Pitch:...

Pin Assignment
1)  Analog RGB input (Mini D-SUB 15P): R G B 2
Mini D-SUB 15P
1 Video Signal Red
Video Signal Green
Video Signal Blue
GND
DDC-GND
Red-GND
Green-GND
Blue-GND
+5V (DDC)
SYNC-GND GND
DDC-SDA
H-SYNC V-SYNC
DDC-SCL
6
7
8
9
10
11
12
13
14
15 2
3
4
5
Pin No Name
510
15 1
6
11
2)  S-VIDEO input (MINI DIN 4P):  V I D E O 
MINI DIN 4P
Name
GND
GND
Y (Luminance)
C (Chroma)
Pin No
1
2
3
4
3)  Digital RGB input (DVI-D): R G B 1
1
2
3
4
5
6
7
8 9
10
11
12
13
14
15
16 17
18
19
20
21
22
23
24
Pin -...