Mitsubishi Electric Ldt322v Users Manual

Power Indicator
Status
Power ON Green
Power OFF RedRed On
Green Blinking
Power Standby Red, GreenRed Blinking
*
Power Standby when 
“SCHEDULE” is enable
Diagnosis
(Detecting failure)
See troubleshooting on 
page 35
Using Power Management
The LCD monitor follows the VESA approved DPM Power
Management function.
The power management function is an energy saving
function that automatically reduces the power consumption
of the display when the keyboard or the mouse has not been
used for a fi xed period.
The...

English
Information OSD
RGB1, 2, 3
Video Input mode
Input signal Information
Audio input mode
Picture Size modeRGB2 
1024 x 768 
48kHz  60Hz
AUDIO : 1 
SIZE : FULL
)
DVD/HD
Video Input mode
Audio input mode
Picture Size modeDVD/HD
AUDIO : 3 
SIZE : FULL
VIDEO, VIDEO
Video Input mode
Input Signal Colour System mode
Audio input mode
Picture Size mode
VIDEO
NTSC
AUDIO : 3
SIZE : NORMAL
PIP or POP
Main:RGB2
Sub:VIDEO
Main picture Information
Sub picture Information
Main picture Information
RGB2 
1024 x 768...

OSD (On-Screen-Display) Controls 
SET
Press MENU button to 
open Main menu.  Press 
UP or DOWN button to 
select sub-menu.
Press EXIT button to 
open Main menu.
Press UP or DOWN 
button to select.UP or DOWN button INPUT button Press UP or DOWN, and 
PLUS or MINUS button to 
select function, or control 
which you like.  Press INPUT 
button to decide.
Press INPUT button to 
decide.
Press EXIT button 
to exit.Press UP or DOWN, and PLUS or 
MINUS button to select  function, 
or control which you like.
Press...

English
BRIGHTNESS
Adjusts the overall image and background screen brightness.
Press + button to increase brightness.
Press - button to decrease brightness.
CONTRAST
Adjusts the image brightness in relation to the input signal.
Press + button to increase contrast.
Press - button to decrease contrast.
NOTE: sRGB picture mode is standard and cannot be changed.
SHARPNESS
This function is digitally capable to keep crisp image at any timings.  \
It is adjustable to get a distinct image or a soft one as you...

H POSITION
Controls Horizontal Image position within the display area of the LCD.
Press + button to move screen to right.
Press - button to move screen to left.
V POSITION
Controls Vertical Image position within the display area of the LCD.
Press + button to move screen to UP.
Press - button to move screen to DOWN.
CLOCK     * : INPUT RGB2,3 only
Press + button to expand the width of the image on the screen the right.
Press - button to narrow the width of the image on the screen the left.
CLOCK PHASE...

English
BALANCE
Adjust the balance of L/R volume.
Press + button to move the stereo sound image to right.
Sound of the left side will be small.
Press - button to move the stereo sound image to left.
TREBLE
To accentuate or reduce the high frequency sound.
Press + button to increase TREBLE sound.
Press - button to decrease TREBLE sound.
BASS
To accentuate or reduce the low frequency sound.
Press + button to increase BASS sound.
Press - button to decrease BASS sound.
AUDIO RESET
Selecting Audio reset...

AUTO SETUP     * : INPUT RGB2,3 only
Press SET button to automatically adjust screen size, horizontal position, vertical position, clock, clock phase, 
white level and black level.
Press EXIT button to cancel execution AUTO SETUP and then will return to the previous menu.
AUTO ADJUST     * : INPUT RGB2,3 only
Selecting the auto adjust ON/OFF.
Selecting ON when changing the timing, the horizontal position, vertical\
 position and clock-phase will adjust automatically.
POWER SAVE
Selecting RGB ON, the...

English
OSD TURN OFF
The OSD control menu will stay on as long as it is use.  In the OSD Turn Off submenu, you can select how long the monitor 
waits after the last touch of a button to shut off the OSD control menu. 
The preset choices are 5 -120 seconds.
INFORMATION OSD
Selects the information OSD display or not. 
The information OSD will display when input signal or source change or warning message like as no-signal or out-of range.
A time between 1 to 10 seconds is available.
OFF TIMER
To select OFF...

INPUT RESOLUTION     * : INPUT RGB2,3 only
Selects to decision of input signal about below timings, 1024x768, 1280x\
768 and 1360x768.
AUTO: Determines the resolution automatically.
1024x768: Determines the resolution as 1024x768
1280x768: Determines the resolution as 1280x768
1360x768: Determines the resolution as 1360x768
BLACK LEVEL EXPANSION     * : INPUT VIDEO, VIDEO only
Selects a level of black expansion.
In case of go under the black cut-off level, please adjust the “Black level” in moderation...

English
TILING
TILING demonstrates multiple screens. This feature provides a single lar\
ge screen using up to 16 monitors.  
It will be able to divide up to 4 each H and V.  
This requires you to feed the PC output into each of the monitors throug\
h a distributor.
H MONITORS: Select number of horizontal divide.
V MONITORS: Select number of vertical divide.
POSITION: Select a position to expand the screen.
FRAME COMP: Works in tandem with TILING to compensate for the width of t\
he tile bezels in order...