Mitsubishi Electric Ldt322v Users Manual

 32 LCD Display Monitor
USER’S MANUAL
1. Users Manual

1-1  

English
Important Information ........................................................................\
...........................................................  English-2
Safety Precautions, Maintenance & Recommended Use  ........................................................................\
...   English-4
Contents ...............................................................\
........................................................................................  English-5
Parts Name and...

DECLARATION OF CONFORMITY
This device complies with Part 15 of FCC Rules. Operation is subject to \
the following two conditions. (1) This device may 
not cause harmful interference, and (2) this device must accept any interference received, including interference that may 
cause undesired operation.
      U.S. Responsible Party:  Mitsubishi Digital Electronics America, Inc.
   Address:  9351 Jeronimo Road,
      Irvine, California 92618 U.S.A.
   Tel. No.:   +1 - (949) 465-6000
   Type of Product:...

English
Important Information
TO REDUCE THE RISK OF ELECTRIC SHOCK, MAKE SURE POWER CORD IS UNPLUGGED \
FROM
WALL SOCKET. TO FULLY DISENGAGE THE POWER TO THE UNIT, PLEASE DISCONNECT THE
POWER CORD FROM THE AC OUTLET. DO NOT REMOVE COVER (OR BACK). NO USER
SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
This symbol warns user that uninsulated voltage within the unit may have suffi cient magnitude to cause
electric shock. Therefore, it is dangerous to make any kind of contact with...

•   The power cable connector is the primary means of 
  detaching the system from the power supply. The monitor should be installed close to a power outlet, which is easily 
accessible.
•   Handle with care when transporting. Save packaging for  transporting.
•   Please clean the holes of back cabinet to reject dirt and  dust at least once a year because of set reliability.
•   If using the cooling fan continuously, it’s recommended to  wipe holes a minimum of once a month.
•   When installing the...

English
Contents
* Remember to save your original box and packing material to transport o\
r ship the monitor. Your new LDT322V monitor box* should contain the following:
• LCD monitor
•  Power Cord (3 m) 
•  Video Signal Cable (4 m)
• User’s Manual
•  Wireless Remote Control and AAA Batteries• Clamper x 2
•  Screw for Clamper x 2
•  Main switch cover
•  Screw for Main Switch cover x 2
• Cable Holder
The following components are prepared as option.
• External Speakers
• Stands
Screw for Clamper  (M4 x...

ON
EXIT MUTE INPUT
Button Location
OFF
 EXIT button
Activates the OSD menu when the OSD menu is turned-off.
Acts as EXIT button to move to previous menu with OSD 
menu.
  Remote control sensor and Power indicator
Receives the signal from the remote control (when using the 
wireless remote control).  See also page 9.
Glows green when the LCD monitor is in active and glows 
red  when the LCD is in POWER OFF mode.  When the LCD 
is in power save mode, it will glow both green and red.  When 
SCHEDULE is...

English
  AUDIO IN 1, 2, 3
To input audio signal from external equipment such as a com-
puter, VCR or DVD player.
 AUDIO OUT
To output the audio signal from the AUDIO IN 1,2 and 3 jack.
 VIDEO IN/OUT
VIDEO IN connector (BNC and RCA): To input a composite 
video signal.  BNC and RCA are not available at the same 
time. (Use only one input).
VIDEO OUT connector (BNC):  To output the composite 
video signal from VIDEO IN connector.
S-VIDEO IN connector (MINI DIN 4 pin):  To input the 
S-video (Y/C separate...

Wireless Remote Control
 POWER button
Switches the power on/off. 
* If Power Indicator is not glowing, then no controls will work.
 INPUT button
Selects from input signal, [RGB1],  [RGB2],  [RGB3], [DVD/
HD],  [VIDEO] and [VIDEO]. 
  AUDIO INPUT button
Selects from input audio signal, [AUDIO1], [AUDIO2], 
[AUDIO3].
 SIZE button
Selects picture size, [FULL], [NORMAL], [CUSTOM] , [DYNAMIC] 
and [REAL]. See page 20.
  PICTURE MODE button
Selects from picture mode, [HIGHBRIGHT],  [STANDARD],  
[sRGB],...

English
Handling the remote control
*  Do not subject to strong shock.
*  Do not allow water or other liquid to splash the remote control. If the remote control gets wet, wipe it dry immedi-
ately.
*  Avoid exposure to heat and steam.
*  Other than to install the batteries, do not open the remote.
Operating Range for the Remote Control
Point the top of the remote control toward the LCD monitors 
remote sensor during button operation.
Use the remote control within a distance of about 7 m/23 ft. 
from the...