Home
>
Mitel
>
Communications System
>
Mitel SX 200 DIGITAL Pabx Superset 3 Telephone Description Manual
Mitel SX 200 DIGITAL Pabx Superset 3 Telephone Description Manual
Here you can view all the pages of manual Mitel SX 200 DIGITAL Pabx Superset 3 Telephone Description Manual. The Mitel manuals for Communications System are available online for free. You can easily download all the documents as PDF.
Page 71
SUPERSET 3DN Set Information 6. DATA CARTRIDGE OPERATION General 6.01This is only a brief description of data call operations possible with the SUPERSET 3DN telephone data cartridge and feature keys.For more information on data calls, refer to Section MITLS 109-094- 105-NA.To originate a data transceiver (DTRX) call from the SUPERSET 3DN telepone: Press the CALL/ATTN key. Enter the number destination from the data terminal keyboard. The LCD beside the CALL/ATTN key provides call status indication as...
Page 73
.SUPERSET 3DN Set Information 7. LINE APPEARANCES General 7.01A line is said to “appear” at a SUPERSEJ 3DN telephone if the line has been assigned to one of the twelve available positions on the Line Status Display and can be selected or accessed by the set user. A line can be programmed to appear at one set, or at more than one set, or more than once at a particular set. Although a line can appear more than once throughout the system, it is always identified by its unique directory number. 7.02The...
Page 74
SECTION MITL9109-094-108-NASYMBOL clDESCRIPTIONMEANING NO SYMBOL IN DISPLAVLINE IDLE 4*DISPLAV ALTERNATES INCOMING CALL BETWEEN THESE TWO SYMBOLS LINE BUSY AT THIS SET DISPLAY SOLID SQUARE DISPLAY SOLID CIRCLELINE BUSY AT ANOTHER SET DISPLAV ALTERNATES BETWEEN SOLID AND CLEARCALL ON HOLD AT THIS SET 4DISPLAV CIRCLE FLASHESCALL ON HOLD AT ON AND OFFANOTHER SET 5634ElRlFigure 7-l Line Status Display Symbols Page 18
Page 75
SUPERSET 3DN Set Information 8. SHIPPING AND RECEIVING General 8.01The SUPERSEJ 3DN telephone is shipped in a single carton. 8.02The SUPERSEJ 3DN telephone disassembles into main assem- bly, handset, and handset cord. Additional items include iden-tification cards (for telephone numbers and lines), protective covers for these cards, reference guide, installation guide, and warranty tag. Delivery Check 8.03On delivery at the destination, check that all items are present and undamaged. Retain some sets of...
Page 77
SUPERSET 3DN Set Information 9. INSTALLATION WARNING ANY CONNECTION OF THIS SET TO AN OFF PREMISE APPLICATION, AN OUT OF PLANT APPLICATION, OR TO ANY OTHER EXPOSED PLANT APPLICATION MAY RESULT IN A SAFETY HAZARD, AND/OR DEFECTIVE OPERATION, AND/OR EQUIPMENT DAMAGE. 9.01Do NOT connect SUPERSET 3DN telephones in parallel, to stan- dard lines, or as Power Fail Transfer extensions. Do not use a hand test telephone (butt-in) to check a SUPERSET 3DN telephone line, because its Digital Line Card has no loop...
Page 78
MITEL STANDARD PRACTICEMITL9109-094-109-NAIssue 1, April 1988 SX-200” DIGITAL PRIVATE AUTOMATIC BRANCH EXCHANGE SUPERSET 4TMDN TELEPHONE INFORMATION @Copyright 1988, MITEL Corporation. All rights reserved, T”Trademark of MITEL Corporation @Registered Trademark of MITEL Corporation
Page 79
MITL9109-094-109-NANOTICE The information contained in this document is believed to be accurate in all respects but is not warranted by Mite1 Corporation (MITEL). The information is subject to change without notice and should not be construed in any way as a commitment by Mite1 or any of its affiliates or subsidiaries. Mite1 and its affiliates and subsidiaries assume no responsibility for any errors or omissions in this document. Revisions of this document or new editions of it may be issued to...
Page 80
SUPERSET 4DN Telephone information CONTENTS PAGE1. INTRODUCTION General . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Reason for Issue . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . , . 1 2. GENERAL DESCRIPTION General . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 3. PHYSICAL DESCRIPTION Liquid Crystal Display......................................