MikroTik Router OS V3.0 User Manual

DDNS Update Tool
Document revision 1.3 (January 23, 2008, 14:31 GMT)
This document applies to MikroTik RouterOS V3.0
Table of Contents
TableofContents
Summary
Specifications
Description
AdditionalDocuments
DynamicDNSUpdate
PropertyDescription
Notes
Example
General Information
Summary
5
	 59! 0	
  ( 	 	 
  	
 
	 


 
 
	 *$ 	 *
  


 	
 
	 
 	
 8
 
 
	 (  	 	 2
 
  	
 ! 59!
	
 	 	 ...

Command name:/tool dns-update
Property Description
address(IP address) - defines IP address associated with the domain name
dns-server(IP address) - DNS server to send update to
key(text; default:) - authorization key (password of a kind) to access the server
key-name(text; default:) - authorization key name (username of a kind) to access the server
name(text) - name to attach with the IP address
ttl(integer; default:0) - time to live for the item (in seconds)
zone(text) - DNS zone where to update the...

GPS Synchronization
Document revision 2.1 (January 23, 2008, 14:31 GMT)
This document applies to MikroTik RouterOS V3.0
Table of Contents
TableofContents
Summary
Specifications
Description
AdditionalDocuments
SynchronizingwithaGPSReceiver
PropertyDescription
Notes
Example
GPSMonitoring
Description
PropertyDescription
Example
General Information
Summary
I	 $


 !
 &I$! ( 	
     
 ! 
 
 
  	

 	


 & 	   	 9$ 
 ...

I$! 
  	 
 -D 	

 
	

 
 G 

 
	 	
 
 /- 
	  *
 	

	
 	
 	
  printenabled: noport: (unknown)set-system-time: yes[admin@MikroTik] system gps> set enabled=yes port=serial0[admin@MikroTik] system gps> printenabled: yesport: serial0set-system-time: yes[admin@MikroTik] system gps>
Page 423 of 480Copyright 1999-2007, MikroTik. All rights reserved. Mikrotik, RouterOS and RouterBOARD are trademarks of Mikrotikls SIA.Other trademarks and registred...

GPS Monitoring
Home menu level:/system gps monitor
Description
 	
    


 
 	
	 (  	 I$! (
Property Description
altitude(read-only: text) - altitude of the current location
date-and-time(read-only: text) - UTC date and time received from GPS server
latitude(read-only: text) - latitude of the current location
longitude(read-only: text) - longitude of the current location
speed(read-only: text) - mean velocity
valid(read-only: yes|no) - whether the received...

LCD Management
Document revision 2.6 (February 6, 2008, 4:17 GMT)
This document applies to MikroTik RouterOS V3.0
Table of Contents
TableofContents
Summary
Specifications
Description
ConfiguringtheLCDsSettings
PropertyDescription
Example
LCDInformationDisplayConfiguration
Description
PropertyDescription
Notes
Example
LCDTroubleshooting
Description
General Information
Summary
A35 	  
 	 
 
	


  
 ! 
 
 
 A35 		
•3
	

2 &...

5	
	 
	 	 


 
	
 	
DB25mSignalLCD Panel
1Enable (Strobe)6
2Data 07
3Data 18
4Data 29
5Data 310
6Data 411
7Data 512
8Data 613
9Data 714
14Register Select4
18-25, GNDGround1, 5, 16
$

+ 
 	 
 /G 
  
 $3/G.-   
 

 


  
 
 /N
 

I95 	
 ?

18-25, GNDGround1, 3, 4, 16
+5VPower2, 15
Crystalfontz LCD Installation Notes
) 



 
 A35 	  
 	(		
  
 
 
	

 	
  
 

   8
[admin@MikroTik] port> print# NAME USED-BY BAUD-RATE0 serial0 Serial Console 96001 serial1 9600[admin@MikroTik] port>
 	 	
   
 
 ;G..   
 
 3
	

2 	 A35 
Portwell Installation Notes
 	 	
 
  
 
 -D..  $
 A35   ...

[admin@MikroTik] system lcd> printenabled: notype: 24x4port: parallelcontrast: 0[admin@MikroTik] system lcd> set enabled=yes[admin@MikroTik] system lcd> printenabled: yestype: 24x4port: parallelcontrast: 0[admin@MikroTik] system lcd>
 
	 3
	

2 	 A35 

!
[admin@MikroTik] system lcd> set port=serial1[admin@MikroTik] system lcd> printenabled: yestype: 24x4port: serial1contrast: 0[admin@MikroTik] system lcd>
LCD Information Display Configuration
Home menu level:/system lcd page...

0 5s System date and time1 5s System resources - cpu and memory load2 5s System uptime3 5s Aggregate traffic in packets/sec4 5s Aggregate traffic in bits/sec5 5s Software version and build info6 5s ether17 5s prism1[admin@MikroTik] system lcd page>
 
 H!
 	
 	
 
H 	 
  	  /. 

[admin@MikroTik] system lcd page> set 0 display-time=10s[admin@MikroTik] system lcd page> printFlags: X - disabled# DISPLAY-TIME DESCRIPTION0 10s System date and time1 5s System resources - cpu...