Miele Wt 2670 Wpm Operating Instructions

Control panel
aStart/Stopbutton
For starting the programme selected
and cancelling a programme once it
has started.
bDisplay with–,OK,+and
Load/Detergentbuttons
See the following page for more
details.
cmbutton
For selecting delay start and
setting the time of day.
dPC / Optical interface
This is used by service technicians to
run diagnostic checks on your
machine and can also be used to
update programming data in the
future.
eExtra optionbuttons
with indicator lights
Various extra options can be added...

Display
When a programme is selected the
display can be used to select and
change programme parameters.
- / + buttons
For altering the parameters highlighted
in the display:
-decreases the parameter or moves
the highlighting upwards
+increases the parameter or moves
the highlighting downwards.
OK button
For confirming the parameter selected
and choosing the next parameter.
Load/Detergentbutton
For calling up the load size and the
detergent amount.With the programme selector at the
Further...

Before using the machine for the first
time ensure that it is correctly
installed and connected. See
Installation and connection. Also
check that the drain filter is securely
tightened to prevent the risk of water
leaks during use.
The washer-dryer has a sensor which
measures the amount of laundry in the
drum. This determines the amount of
detergent required. To allow the load
size indicator to function correctly, you
must first run a wash programme
without any laundry
and without
detergent.
^Open the...

Reminder to remove transport struts
To avoid the risk of damage, the
transport struts must be removed
before the washer-dryer is used for
the first time. See Installation and
connection for instructions on how
to do this.
i
Remove transport
struts
OK
^After removing the transport struts (if
this has not already been done by
your fitter) press theOKbutton.
Running your first programme
Your washer-dryer is now ready for the
first programme to be run.
15:00
Select programme
^
Turn the programme selector to...

Energy and water consumption
–Water consumption and energy
usage are determined by the size of
the load.
To make the most out of your
machine, load the maximum dry load
for the programme you are using.
–Use theAutomaticandExpress
programmes for small loads.
–When smaller amounts of laundry are
washed using theCottons
programmes, the automatic load
recognition system will reduce the
amount of water, time and energy
used. This may mean that the
programme duration is adjusted
during the course of the wash...

Brief instructions
The headings numberedA,B,C,...
show the operating sequence and can
be used as brief instructions.
Separate washing
ASort the laundry
^Empty all pockets.
,Foreign objects (e.g. nails, coins,
paper clips, etc.) can cause damage
to garments and components in the
machine.
^
Badly soiled areas, stains etc. should
be cleaned as soon as possible,
preferably whilst still fresh. Spillages
should be carefully dabbed off using
a soft colourfast cloth. Do not rub!
Badly soiled areas can be...

BSwitch the machine on
The interior drum lighting will come on.
CSelect a programme
^Select the programme you want.
The programme selected will appear in
the display.
Minimum iron
Further programmes:
When you turn the programme selector
toFurther programmes, a list of these
programmes will appear in the display.
EDark garments
Denim
ShirtsH
^Use the-or+button to highlight the
programme you wish to select and
confirm your selection by pressing
theOKbutton.
Wait until the display switches to show
the menu...

^You can select any extras options
with the extra option buttons.
^Each press of the top right hand
button selects the extra option in the
following order:Pre-washor
Soakor
no option is selected.
Not all the extra options are suitable for
use with every wash programme.
You can only select extra options which
are compatible with the basic
programme being used.
TheLow temperatureextra only
applies to drying.
^
Select Delay start, if required.DLoad the drum
^Press theDoorbutton to open the
drum door.
The...

EAdd detergent
The load size indicator display will be
replaced with the detergent percentage
display.
Detergent 75%
A
40%Add slightly less than half the
amount recommended . . .
50%Add half the amount
recommended . . .
60%Add slightly more than half the
amount recommended . . .
75%Add three quarters of the
amount recommended . . .
100%Add the full amount
You also need to take the level of soiling
and water hardness into account.
too little detergent results in:
–
Laundry not getting properly clean
and...

FStart the programme
^Press the flashingStart/Stopbutton.
The estimated programme duration will
count down in the display in one minute
steps. During the first 10 minutes the
machine measures how much water is
being absorbed by the laundry. The
programme duration may be longer or
shorter depending on this absorbency
rate.
The programme sequence is also
shown in the display. The washer-dryer
shows you when each section of the
programme is reached.
The drum lighting switches off once the
programme has...