Home > Miele > Washing Machine > Miele W1712 User Manual

Miele W1712 User Manual

    Download as PDF Print this page Share this page

    Have a look at the manual Miele W1712 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 171 Miele manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    							Automatic cold to 40°C Max. load 3.5 kg
    Fabric Mixed loads of garments suitable for theCottonsandMinimum
    ironprogrammes. Sort according to colour.
    Note The wash parameters (e.g. water level, wash rhythm and spin
    speed) are adjusted automatically in this programme to ensure
    the best possible care and wash result for each item.
    Shirts cold to 60°C Max. load 2.0 kg
    Notes
    –Pre-treat collars and cuffs if necessary.
    –Wash silk garments on theDelicatesprogramme.
    Extra options Short, Water plus
    Denim cold to 60°C Max. load 3.0 kg
    Notes
    –Wash denim inside out.
    – Denim often contains excess dye and will run during the first
    few washes. Wash light and dark coloured items separately.
    Extra options Short, Pre-wash
    Dark garments cold to 40°C Max. load 3.0 kg
    Item Dark garments made from cotton or mixed fibres.
    Note Wash inside out.
    Extra option Short
    Spin
    Note–
    Make sure you select the appropriate spin speed.
    –
    Drain only: SelectNou.
    Programme chart
    21 
    						
    							Main wash Rinses Spinning
    Water
    levelWash
    rhythmWater
    levelRinses Interim
    spinFinal spin
    Cottonsda\(2-31)LL
    Minimum iron\(ce2-3
    2)LL
    Delicatesede3–L
    Woollenseee2LL
    Expressdbd2-32)LL
    Automatic\(abce2-3
    2)LL
    Shirtsece2–L
    Denim\(ce3–L
    Dark garments\(bd3LL
    Spin–––– –L
    d= Low water level
    \(= Medium water level
    e= High water levela= Intensive rhythm
    b= Normal rhythm
    c= Gentle rhythm
    d= Sensitive rhythm
    e= Handwash rhythm
    See the following pages for more information about the programme sequences.
    Programme sequence
    22 
    						
    							This machine has fully electronic
    controls with automatic load
    recognition. It takes in the right amount
    of water required for the programme
    depending on the amount of laundry
    and its absorbency rate. This means
    that programme cycles and durations
    can vary.
    The programme sequences outlined in
    the chart are based on the basic
    programme with a full load. Extra
    options which can be selected have not
    been taken into account.
    The display shows the stage the
    programme has reached.Special features in the programme
    sequences:
    Anti-crease:
    For instructions how to activate
    anti-crease, please refer to
    programmable functions in the last
    section of these instructions.
    (user-selectable Programmable
    Feature. Default as delivered is OFF)
    At the end of every programme, with
    the exception of theWoollens
    programme, the drum continues to turn
    at intervals for up to 30 minutes to help
    prevent creasing. The door can be
    opened and laundry removed at any
    time during the anti-crease phase.
    1)A third rinse is carried out if:
    – there is too much foam in the drum
    – a spin speed lower than 700 rpm has
    been selected
    –Nouhas been selected
    2)A third rinse is carried out if:
    Nouhas been selected
    Programme sequence
    23 
    						
    							Washing
    The figure quoted in the bucket is the
    maximum temperature the garment
    can be washed at. The number of
    bars under the symbol indicate the
    level of agitation permitted.
    9No bar under the symbol:
    = normal agitation
    4One bar under the symbol:
    = reduced agitation
    cTwo bars under the symbol:
    = much reduced agitation
    /Hand wash (if no temperature
    is specified use the lowest
    temperature or cold)
    hDo not wash
    Examples of programme selection
    Programme Care label
    Cottons9
    						
    							Cancelling a programme
    You can cancel a programme at any
    time after it has started.
    ^Press theStart/Stopbutton.
    Cancel programme
    ^Press the flashingStart/Stopbutton
    again.
    The suds will be pumped away.
    If you want to remove the laundry:
    ^Press theDoorbutton.
    If you want to select a different
    programme:
    ^Switch the machine off with the
    I-On/0-Offbutton.
    ^Switch the washing machine back on
    again.
    ^Select and start a new programme.
    Interrupting a programme
    ^
    Switch the machine off with the
    I-On/0-Offbutton.
    To continue with the same programme:
    ^
    Switch the machine back on with the
    I-On/0-Offbutton.
    Changing a programme
    After the start of a programme it is no
    longer possible to select a different
    programme.
    Temperature
    It is possible to select a different
    temperature up to 5 minutes after the
    programme has started.
    ^Press theTemperaturebutton.
    Spin speed
    It is possible to change the spin speed
    up until the final spin begins.
    ^Press theSpin speedbutton.
    Extra options
    It is possible to select or deselect the
    ShortandWater plusextra options up
    to five minutes after the programme has
    started.
    A programme cannot be cancelled
    or changed if the safety lock has
    been activated.
    Changing the programme sequence
    25 
    						
    							Adding or removing laundry
    after a programme has started
    ^Press theDoorbutton to open the
    drum door.
    ^Add or remove items.
    ^Close the drum door.
    The programme will continue
    automatically.
    Please note:
    Once a programme has started the
    machine cannot recognise any
    adjustment to the load.
    For this reason, if laundry is added or
    removed after the start of a programme,
    the machine will always complete the
    programme cycle assuming a full load
    which can lead to an increase in the
    programme duration shown in the
    display.
    The door cannot be opened, if:
    –
    the suds temperature is above55°C.
    –
    the water is above a certain level.
    –
    the programme has reached the
    Final spinstage.
    –
    the safety lock has been activated.
    If you press theDoorbutton when the
    above conditions are present, the
    following will appear in the display:
    :Door locked
    Safety lock
    The safety lock prevents the machine
    from being opened, the programme
    from being cancelled or the machine
    from being switched off during a
    wash programme.
    To activate the safety lock
    ^Press and hold in theStart/Stop
    button after the programme has
    started.
    Stop or in 3 secs0
    ^Keep theStart/Stopbutton pressed in
    until the time has elapsed and the
    following appears in the display:
    Locked0
    The safety lock is now activated. It is
    deactivated automatically at the end of
    the programme.
    To deactivate the safety lock
    ^
    Press and hold in theStart/Stop
    button after the programme has
    started.
    Unlock in 3 secs0
    ^
    Keep theStart/Stopbutton pressed in
    until the time has elapsed and the
    following appears in the display:
    Unlocked1
    Changing the programme sequence
    26 
    						
    							The correct detergent
    All modern detergents produced forFront loadingwashing machines are
    suitable. Use dispensing aids, e.g. balls, if these are supplied with the detergent.
    Tablets are suitable for full loads, but note that it may be impractical to reduce
    tablets for smaller loads. Some tablets do not dissolve as rapidly as others, and
    may not be suitable for programmes with short durations.
    Do not use biological detergents on silk as the enzymes may damage the silk!
    Instructions for use and recommended dosage amounts are given on the
    detergent packaging.
    For programmes without pre-wash or time delay start, liquid detergent can either
    be dispensed placing a ball shaped container (commonly provided by the
    detergent manufacturer) straight onto the laundry load or alternatively dispensed
    through the detergent dispenser drawer. For programmes with pre-wash or delay
    start facility (where applicable), an additional liquid detergent dispenser insert
    (Material number 6641240) is available from the Miele Spare Parts Department.
    All purpose
    detergent for
    whites*Detergent for
    coloured
    fabrics*Detergent for
    delicates
    Cottons X X
    Minimum iron X X
    Delicates X
    Woollens Liquid detergent for machine-washable woollens
    Express X X
    Automatic X X
    Shirts X X
    Denim X
    1)
    Dark garments X1)
    1) Only use liquid detergent
    * Powder detergent, tablet detergent, liquid detergent and liquid tab detergent.
    Detergent
    27 
    						
    							The right amount to dispense will
    depend on the following:
    –The quantity of laundry.
    –The soiling level of the laundry.
    Lightly soiled
    No visible dirt or stains. Possibly
    slight body odour.
    Normally soiled
    Visibly dirty and/or just a few slight
    stains.
    Heavily soiled
    Stains and soiling clearly visible.
    – The water hardness level.
    – Check with your local water supplier
    if you do not know the water
    hardness level in your area.
    Water softeners
    A water softener can be used to cut
    down on the use of detergents in hard
    water areas. Dispense according to the
    amount specified on the packaging.
    First add detergent and then the water
    softener.
    Use a quantity of detergent as for soft
    water.
    Washing with several
    components
    If you wash using several components
    (e.g. special application detergents),
    dispense them into compartmentjin
    the following order:
    1. Detergent
    2. Water softener
    3. Stain remover
    This way the agents are distributed
    more efficiently.
    Detergent
    28 
    						
    							Fabric conditioners and liquid
    starch
    Fabric conditioners
    make garments soft to handle and help
    prevent static cling when tumble
    drying.
    Starch
    stiffens and gives body to items of
    laundry, e.g. shirts, tablecloths and bed
    linen.
    Automatic dispensing of fabric
    conditioner or liquid starch to
    laundry at the end of a programme
    ^
    Add the fabric conditioner or liquid
    starch to compartment
    						
    							,Disconnect the machine from the
    mains electricity supply and
    withdraw the plug from the socket
    before cleaning the machine.
    ,The washing machine must not
    be hosed down.
    External casing and fascia
    panel
    ^Clean the casing with a mild
    non-abrasive cleaning agent or soap
    and water. Wipe dry with a soft cloth.
    ^The drum can be cleaned using a
    suitable proprietary stainless-steel
    cleaning agent following the
    manufacturers instructions on the
    packaging.
    ,Do not use solvents, abrasive
    cleaners, glass cleaners or
    all-purpose cleaning agents.
    These might damage plastic
    surfaces and other components
    because of the chemicals they
    contain.Extra cleaning
    Carry out a hot wash (70°C or above)
    with powder detergent approx. every 6
    weeks to help prevent deposits building
    up in the machine. These can occur
    when washing is mainly done at low
    temperatures, and can also lead to
    unpleasant smells. If you have no
    reason to wash occasionally at this high
    temperature, then run a Cottons 95°C
    programme with detergent but no
    laundry at regular intervals.
    Cleaning the detergent
    dispenser drawer
    Remove detergent residues regularly.
    ^
    Pull out the detergent dispenser
    drawer until a resistance is felt. Press
    down the release catch and at the
    same time pull the drawer right out of
    the machine.
    ^
    Clean the detergent drawer with
    warm water.
    Cleaning and care
    30 
    						
    All Miele manuals Comments (0)

    Related Manuals for Miele W1712 User Manual