Miele W 3985 Wps Operating Instructions

Load Consumption data
Energy Water Duration
in kWh in litres Short Normal
Cottons95°C 6.0 kg 1.99 47 2 h 09 min
60°C1)6.0 kg 1.02 47 1 h 49 min
60°C 3.0 kg 0.73 39 1 h 03 min
40°C1)6.0 kg 0.65 59 2 h 04 min
40°C2)3.0 kg 0.36 39 59 min
Minimum iron40°C1)3.0 kg 0.50 55 59 min 1 h 19 min
Delicates30°C 2.0 kg 0.35 69 49 min 59 min
Automatic40°C 3.5 kg 0.35 - 0.50 40 - 55 – 1 h 18 min
Dark garments40°C 3.0 kg 0.60 60 1 h 05 min 1 h 15 min
Shirts60°C 2.0 kg 1.00 59 1 h 02 min 1 h 12 min
Denim40°C 3.0 kg 0.50...

Height 850 mm
Width 595 mm
Depth 580 mm
Depth with door open 975 mm
Height for building under 820 mm
Width for building under 600 mm
Depth for building under 600 mm
Weight 94 kg
Maximum floor load 1600 Newton (approx. 160 kg)
Capacity 6 kg dry laundry
Voltage see data plate
Connected load see data plate
Fuse rating see data plate / plug
Consumption data see Consumption data
Water flow pressure minimum 100 kPa (1 bar)
Water flow pressure maximum 1000 kPa (10 bar)
Inlet hose length 1.60 m
Drain hose length...

Settings menu
for changing default settings
The Settings menu is used to alter the washing machines electronics to suit
changing requirements.
Settings can be altered at any time.
 

To open the Settings menu
1 Cottons 60°C Programme selection ...
2 Minimum iron 40°CSettings...
3 Automatic 40°C
4 WoollensH30°C15:00
SelectSettingsfrom the entry menu and confirm your
selection with the multi-function selector.
Selecting settings
SettingsBackA
Language
Time of day...
Water plus
Select the setting you want to change, and confirm your
selection.
If you do not make a selection in the sub-menu within approx.
20 seconds, the menu display will revert to theSettings
menu.
Language
The...

Time of day
First select either a 24 hour or 12 hour clock. Then set the
current time of day.
To select a 24 hour or 12 hour clock
SettingsBackA
Time of day24 h clock
12 h clock
Select the clock option you want and confirm your
selection.
The display will then change to the screen for setting the
time.
To set the time
12:00
Set the time
Use the multi-function selector to select the hour and
confirm your selection. Now set the minutes. Pressing the
multi-function selector again saves the time in...

Water plus
This setting is used to select the
water intake setting for theWater plus
extra option.
There are three different options:
Water +
(the machine is delivered with this
option selected)
The water level is increased in the wash
and rinse stages.
Additional rinse
An extra rinse is introduced.
Water + and add. rinse
The water intake is increased in the
wash and rinse stages and an
additional rinse is also introduced.
Gentle action
Activating gentle action reduces the
drum action and is suitable...

Code
The code prevents your machine being used without your
knowledge.
When the code has been activated, you have to enter a code
after switching the washing machine on. Otherwise the
washing machine cannot be operated.
To activate the Code
SettingsBackA
CodeActivate
SelectActivateand confirm your selection.
To enter the Code
The display will now request that a code is entered. The code
is125and cannot be altered.
0__
Enter code

Turn the multi-function selector until the number1appears.
Then press it...

After the last number has been entered, you must confirm the
code with OK.
125
Confirm code
OK
BackA

Confirm the code by pressing short cut button	.
XCode OK
Code active when machine is switched off
Switch off the washing machine.
To use the washing machine when the code is activated
When the machine is switched on again, the display will
request the code.
Enter code125as described above, and confirm the entry.
The washing machine is now unlocked and ready for use.
To deactivate the Code
Proceed as...

Temperature
You can chose for the temperature to
be displayed in°C/Celsiusor
°F/Fahrenheit.
Buzzer
When the buzzer function has been
activated, an audible tone sounds at
the end of a programme or when
Rinse hold is reached.
There are three different options:
Off
(the machine is delivered with this
option selected as standard)
The buzzer is switched off but sounds
at maximum volume if there is a fault.
Normal
The buzzer sounds at the end of a
programme or when Rinse hold is
reached.
Loud
The buzzer sounds...

Standby
To save energy, the display goes out
and the indicator light for theStart
button flashes slowly.
The display will always go out,
–if a programme is not selected within
10 minutes of the machine being
switched on.
–10 minutes after the end of a
programme.
Operating the multi-function selector or
one of the short cut buttons switches
the display back on again.
You can also choose whether you want
the display to go out 10 minutes after a
programme has started or to remain
visible throughout the...