Miele W 3985 Wps Operating Instructions

							Load Consumption data
Energy Water Duration
in kWh in litres Short Normal
Cottons95°C 6.0 kg 1.99 47 2 h 09 min
60°C1)6.0 kg 1.02 47 1 h 49 min
60°C 3.0 kg 0.73 39 1 h 03 min
40°C1)6.0 kg 0.65 59 2 h 04 min
40°C2)3.0 kg 0.36 39 59 min
Minimum iron40°C1)3.0 kg 0.50 55 59 min 1 h 19 min
Delicates30°C 2.0 kg 0.35 69 49 min 59 min
Automatic40°C 3.5 kg 0.35 - 0.50 40 - 55 – 1 h 18 min
Dark garments40°C 3.0 kg 0.60 60 1 h 05 min 1 h 15 min
Shirts60°C 2.0 kg 1.00 59 1 h 02 min 1 h 12 min
Denim40°C 3.0 kg 0.50 52 50 min 1 h 00 min
Express40°C 3.0 kg 0.30 34 – 30 min
Woollens30°C 2.0 kg 0.23 39 – 39 min
Silks30°C 1.0 kg 0.25 39 – 36 min
Sportswear40°C 2.0 kg 0.35 35 47 min 1 h 07min
Outerwear40°C 2.0 kg 0.45 59 53 Min. 1 h 03 min
Hygiene60°C 6.0 kg 1.40 55 – 2 h 20 min
First wash40°C 3.0 kg 0.37 35 – 51 min
Proofing40°C 2.0 kg 0.30 12 – 29 min
Curtains40°C 2.0 kg 0.45 38 – 55 min
Pillows60°C 1 pillow 0.80 44 – 1 h 20 min
Notes for test institutes:
1)EN 60456 test programme
2)Short programme for test institutes; theShortextra option must be selected.
Consumption data can vary from the nominal values given depending on water
pressure, water hardness, water inlet temperature, room temperature, type and
volume of load, fluctuations in the electricity supply and any extra options
selected.
Consumption data
61
 
						

							Height 850 mm
Width 595 mm
Depth 580 mm
Depth with door open 975 mm
Height for building under 820 mm
Width for building under 600 mm
Depth for building under 600 mm
Weight 94 kg
Maximum floor load 1600 Newton (approx. 160 kg)
Capacity 6 kg dry laundry
Voltage see data plate
Connected load see data plate
Fuse rating see data plate / plug
Consumption data see Consumption data
Water flow pressure minimum 100 kPa (1 bar)
Water flow pressure maximum 1000 kPa (10 bar)
Inlet hose length 1.60 m
Drain hose length 1.50 m
Mains connection cable length 1.60 m
Delivery head max. 1.00 m
Maximum drainage length 5.00 m
LEDs Class 1
Test certificates awarded see data plate
Technical data
62
 
						

							Settings menu
for changing default settings
The Settings menu is used to alter the washing machines electronics to suit
changing requirements.
Settings can be altered at any time.
 
						

							To open the Settings menu
1 Cottons 60°C Programme selection ...
2 Minimum iron 40°CSettings...
3 Automatic 40°C
4 WoollensH30°C15:00
SelectSettingsfrom the entry menu and confirm your
selection with the multi-function selector.
Selecting settings
SettingsBackA
Language
Time of day...
Water plus
Select the setting you want to change, and confirm your
selection.
If you do not make a selection in the sub-menu within approx.
20 seconds, the menu display will revert to theSettings
menu.
Language
The display can be set to appear in one of several different
languages.
To select the language you want, go to theLanguages
sub-menu.
The flag after the wordLanguageacts as a guide to prevent
a language which will not be understood from being set.
A tick will appear beside the language to show that it has
been set.

If the language shown is not the one you want turn the
multi-function selector to highlight the one that you do want
and confirm your selection.
Settings menu
64
 
						

							Time of day
First select either a 24 hour or 12 hour clock. Then set the
current time of day.
To select a 24 hour or 12 hour clock
SettingsBackA
Time of day24 h clock
12 h clock
Select the clock option you want and confirm your
selection.
The display will then change to the screen for setting the
time.
To set the time
12:00
Set the time
Use the multi-function selector to select the hour and
confirm your selection. Now set the minutes. Pressing the
multi-function selector again saves the time in memory.
The time can be changed at any time later on by:
1 Cottons 60°C Programme selection ...
2 Minimum iron 40°C Settings...
3 Automatic 40°C
4 WoollensH30°C15:00

Highlighting the time in the Entry menu and confirming your
selection.
Settings menu
65
 
						

							Water plus
This setting is used to select the
water intake setting for theWater plus
extra option.
There are three different options:
Water +
(the machine is delivered with this
option selected)
The water level is increased in the wash
and rinse stages.
Additional rinse
An extra rinse is introduced.
Water + and add. rinse
The water intake is increased in the
wash and rinse stages and an
additional rinse is also introduced.
Gentle action
Activating gentle action reduces the
drum action and is suitable for
washing slightly soiled items more
gently. It should be activated for
garments with a single bar under the
care label and for articles which feel
too hard after they have been dried.
Gentle action can be activated for the
Cottonsand theMinimum iron
programmes.
The washing machine is delivered with
theGentle actionsetting deactivated.
Suds cooling
When this is activated, additional
water flows into the drum at the end
of the main wash to cool the suds
down. Hot suds can damage plastic
drainage pipes.
Suds cooling takes place when a
Cottonsprogramme with a temperature
of 70°C or higher is selected.
Suds cooling should be activated:
–
to prevent the danger of scalding if
the drain hose is hooked over the
edge of a sink or basin.
–
where the drainage pipes do not
comply with DIN 1986.
The machine is delivered with Suds
cooling deactivated.
Settings menu
66
 
						

							Code
The code prevents your machine being used without your
knowledge.
When the code has been activated, you have to enter a code
after switching the washing machine on. Otherwise the
washing machine cannot be operated.
To activate the Code
SettingsBackA
CodeActivate
SelectActivateand confirm your selection.
To enter the Code
The display will now request that a code is entered. The code
is125and cannot be altered.
0__
Enter code

Turn the multi-function selector until the number1appears.
Then press it to confirm your selection of this number. Now
enter the second number.
Repeat the process until all three numbers have been
entered.
Settings menu
67
 
						

							After the last number has been entered, you must confirm the
code with OK.
125
Confirm code
OK
BackA

Confirm the code by pressing short cut button	.
XCode OK
Code active when machine is switched off
Switch off the washing machine.
To use the washing machine when the code is activated
When the machine is switched on again, the display will
request the code.
Enter code125as described above, and confirm the entry.
The washing machine is now unlocked and ready for use.
To deactivate the Code
Proceed as for activating the code.
Settings menu
68
 
						

							Temperature
You can chose for the temperature to
be displayed in°C/Celsiusor
°F/Fahrenheit.
Buzzer
When the buzzer function has been
activated, an audible tone sounds at
the end of a programme or when
Rinse hold is reached.
There are three different options:
Off
(the machine is delivered with this
option selected as standard)
The buzzer is switched off but sounds
at maximum volume if there is a fault.
Normal
The buzzer sounds at the end of a
programme or when Rinse hold is
reached.
Loud
The buzzer sounds at maximum volume
at the end of a programme or when
Rinse hold is reached.
Keypad tones
An audible tone sounds when the
Startbutton, a short cut button or the
multi-function selector is operated.
The machine is delivered with the
keypad tone switched off.
Display contrast
There are ten different display
contrast settings.
The machine is delivered with the
display contrast on Setting 5.
This will change as soon as a different
setting is chosen.
Settings menu
69
 
						

							Standby
To save energy, the display goes out
and the indicator light for theStart
button flashes slowly.
The display will always go out,
–if a programme is not selected within
10 minutes of the machine being
switched on.
–10 minutes after the end of a
programme.
Operating the multi-function selector or
one of the short cut buttons switches
the display back on again.
You can also choose whether you want
the display to go out 10 minutes after a
programme has started or to remain
visible throughout the programme.
On
The standby function is switched on.
When this option is selected, the
display will go out 10 minutes after a
programme has started.
Not in current prog.
(the machine is delivered with this
option selected as standard)
The standby function is switched off.
The display will remain visible during a
programme.
Memory
If an extra option has been selected
for a programme, or the
recommended temperature or spin
speed has been altered, the machine
will store the changes in memory at
the start of a programme.
These settings will appear in the
display the next time this programme is
selected via theProgramme selection
menu.
The memory function is not
active when
favourite programmes are selected
using the short cut buttons.
The machine is delivered with the
memory function deactivated.
To close the Settings menu
SelectBackand confirm your
selection.
The display will revert to the entry
menu.
Settings menu
70