Miele M 8260-2 Manual
Here you can view all the pages of manual Miele M 8260-2 Manual. The Miele manuals for are available online for free. You can easily download all the documents as PDF.
Page 41
To avoid damaging the outer surfaces of your appliance, do not use: –cleaning agents containing soda, ammonia, acids or chlorides, –cleaning agents containing descaling agents, –abrasive cleaning agents, e.g. powder cleaners and cream cleaners, –solvent-based cleaning agents, –stainless steel cleaners, – dishwasher detergent, – oven sprays, – glass cleaning agents, – hard, abrasive sponges and brushes, e.g. pot scourers, – dirt erasers, – sharp metal scrapers.Accessories supplied Boiling rod The boiling...
Page 42
Repairs may only be carried out by a suitably qualified and competent person in accordance with national and local safety regulations. Repairs and other work by unqualified persons could be dangerous. The manufacturer cannot be held liable for unauthorised work. Some minor problems can be corrected without contacting Miele. Please note: A call-out charge will be applied to unnecessary service visits where the problem could have been rectified as described in these operating instructions. What to do...
Page 43
. . . the microwave operation works but not the lighting. ^You can then operate the appliance as normal, but not the lighting. Contact Miele if you need to replace the lighting. . . . strange noises are heard when the microwave oven is being used. Check whether, ^the food is covered with aluminium foil. If so, remove it. ^Sparks are being created by the use of crockery with a metallic finish. See notes on suitable types of containers. . . . the time of day in the display is not accurate. If there has...
Page 44
In the event of any faults which you cannot remedy yourself, or if the appliance is under warranty, please contact: –your Miele Chartered Agent or –Miele. You will find the telephone number and address of your nearest office on the back cover of this manual. When contacting your Chartered Agent or Miele, please quote the model and serial number of your appliance. This information is given on the data plate, which is located on the inside of the appliance front. Warranty The warranty for this appliance is...
Page 45
Before connecting the appliance, ensure that it has not been damaged in any way. Do not use a damaged appliance. The appliance is supplied with a mains cable and moulded plug ready for connection to an AC single phase 220-240 V 50 Hz supply. Fuse protection is to be conducted as follows: Connection to an earthed power socket, protected with 10 A-L automat or fuse 10 A. Connection must only be made via a suitable switched socket. The electrical system must comply with VDE0100. The appliance should be...
Page 46
When building in the appliance, ensure that the vents at the front of the appliance are not hindered. Make sure that there is a gap of at least 2.5 mm between the sides of the appliance and adjoining furniture doors and at least 4 mm above the appliance. The appliance is designed to be built into a tall unit and is also suitable for underbench installation. The installation of the microwave oven below a cooktop or above a plate warming drawer is not permitted. Building-in dimensions Underbench To...
Page 47
Tall unit Building-in kit The following items are supplied in the accessory pack for installing the appliance: Installation The appliance must be built in before it can be used. Otherwise it poses an electric shock hazard. There are three spacers in the accessory pack: one for the right-hand side (R) and two for the left-hand side (L), depending on whether the housing unit wall is 16 or 19 mm thick. ^Attach the correct left-hand spacer applicable to the thickness of the housing unit wall to one of the...
Page 48
^To secure the spacers and hooks, place a screw in one of the front two holes and another in the middle of the long hole at the back. The long hole allows for adjustment if necessary, and the two additional holes are in case additional screws are required. ^ Slide the appliance into the housing unit, and pull the cable with the plug* through the back of the unit. * Plug shown is for illustration purposes only.^Secure the appliance at the front by lifting it over the hooks and lowering it into position....
All Miele manuals