Miele Kwt4154ug1 Manual

^Swap over the plughand the hinge
pin guideiin the top of the door.
^Hang the door on the lower hinge pin
j, and close the doork.
^
Refit the top hinge pinlthrough the
hinge pin plate into the door.
^
Refit the door staymunderneath the
appliance by securing one screw into
the appliance door and another
through the plastic part of the hinge
pin plate.
Changing the door hinging
31 

Appliance dimensions
* The overall height can be increased by 2
inches (50 mm) by adjusting the feet.
Adjustments
^
Use the flat wrench provided to
adjust the feet as needed, so that the
appliance fits the countertop height.
Preparing the appliance
^With two people, carefully tip the
appliance backward.
^Attach the supplied trim panela
below the appliance, and loosely
tighten the screwsb.
^Arrange the trim panelaover the
long holes in the appliance door
recess.
^Tighten the screwsball the way
down onto...

Fitting the appliance into place
^Slide the appliance into the
installation area.
Ensure that the power cord does not
get caught.
Make sure the power socket remains
accessible.
^Using the attachment strip and
screws, fit the appliance into place.
Under-counter installation
33 

34 

35 

Subject to change without notice / 3208
KWT 4154 UG-1M.-Nr. 06 873 220 / 00