Miele Kwt4154ug1 Manual

Operating and installation instructions
Under counter wine cooler
KWT 4154 UG-1
To prevent accidents and machine damage
read these instructionsbefore
installation or use.M.-Nr. 06 873 220
en-CA 

IMPORTANT SAFETY INSTRUCTIONS.................................4
Description of the appliance.........................................7
Caring for the environment..........................................9
Switching on and off..............................................10
Safety lock.......................................................10
Turning off for longer periods of time..................................11
Optimum temperature and humidity.................................12...

Problem-solving guide............................................22
Noises..........................................................24
After sales service................................................25
Electrical connection..............................................28
Installation......................................................29
Location.........................................................29
Climate range..................................................29...

When using the appliance, follow basic
safety precautions, including the
following:
Read all instructions before installation
and use to prevent accidents and
machine damage.
This appliance is intended for
residential use only. Use only as
described in this Operating manual.
Only use the appliance for its
intended purpose. The manufacturer
cannot be held responsible for
damages caused by improper use
of this appliance.
This appliance complies with current
safety requirements. Improper use
of the...

Installation
This appliance is top-heavy and
must be secured to prevent the
possibility of tipping forward.
Keep the door closed until the
appliance is completely installed
and secured per installation
instructions.
~This appliance must be installed
and connected in compliance with the
installation instructions.
~Installation and repair work should
be performed by a Miele authorized
service technician. Work by unqualified
persons could be dangerous and may
void the warranty.
~Do not operate any appliance...

Disposal of your old appliance
~Before disposing of an old
appliance, first make the door latch or
lock unusable.
~Take off the doors.
~Leave the shelves in place so that
children may not easily climb inside.
~Consult with your municipal policy
on recycling.
~Be careful not to damage any part of
the pipework while awaiting disposal
by:
- puncturing the refrigerant
channels in the evaporator.
- bending any pipework.
- scratching the surface coating.
Splashes of refrigerant can damage the
eyes.
~Your old...

aOn/Off button
bTemperature display for upper zone
cTemperature selector buttons for
upper zone
(+ for warmer; - for colder)
dConstant humidity (Dynamic cooling)
button and indicator lighteSafety lock indicator light
fAlarm Off button
gTemperature display for lower zone
hTemperature selector buttons for
upper zone
(+ for warmer; - for colder)
iInterior lighting button and indicator
light
Description of the appliance
7 

aInterior lighting
bIsolation shelf for thermal separation
cWooden shelf with decorative strip for descriptive labels
dActive charcoal filter
eCondensate channel and
drain hole
Description of the appliance
8 

Disposal of packing materials
The cardboard box and packing
materials are biodegradable and
recyclable. Please recycle.
Ensure that any plastic wrappings,
bags, etc., are disposed of safely and
kept out of the reach of babies and
young children. Danger of suffocation!
Disposal of an old appliance
Old appliances contain materials that
can be recycled. Please contact your
local recycling center about the
possibility of recycling these materials.
Before discarding an old appliance,
disconnect it from the...

Before using for the first time
^Clean the inside of the appliance and
the accessories with warm water and
a little dishwashing liquid, then dry
with a soft cloth.
To ensure that the appliance
functions correctly, let it stand for 30
minutes to 1 hour once it has been
transported to its final location, and
before connecting it to the power
supply.
Turning the appliance on
^Press the On/Off button so that the
temperature displays light up.
The alarm will sound. The appliance
starts to cool down, and the...