Miele Kfn 8995 Seed Operating And Installation Instructions

Cooling drinks
To quickly cool drinks, it is
recommended to use the SuperCool
function in the refrigerator section.
However, if you choose instead to
place bottles in the freezer section for
rapid cooling, make sure that they are
not left in for more than one hour, as
they could burst.
Freezer tray
(may vary by model)
The freezer tray is useful for freezing
small items such as berries, herbs and
vegetables. These can be frozen
individually to maintain their shape
when defrosted.
^
Space the food out...

For the automatic ice cube maker to
operate, it must be connected to the
household water line.
Switching the ice cube maker
ON
^Switch the freezer ON.
^Open the top left drawer in the
freezer section.
^Press the ON/OFF button, and the
indicator light will now come on.
^Close the drawer.
The drawer must be completely shut
for ice cubes to be produced.
After the appliance is turned on for the
very first time, it can take up to 24 hours
for the first ice cubes to drop out of the
ice cube maker and collect...

Switching OFF the ice cube
maker
If you do not want the appliance to
make any ice cubes, the ice cube
maker can be switched off
independently of the freezer section.
^Press the ON/OFF button on the ice
cube maker, and the indicator light
will now come on.
If the ice cube maker is switched off,
the ice cube drawer can be used as an
extra drawer for freezing fresh food or
storing frozen food.
Making ice cubes (may vary by model)
33
 

Refrigerator section
During normal operation, condensate
and frost can form on the back wall of
the refigerator section. These are
automatically removed by the
appliance during automatic defrosting.
The condensate is drained away
through a channel and drain hole, then
fed into an evaporation system at the
back of the appliance.
It is important to keep the
condensate channel and drain hole
clean and free of blockages, so that
the condensate can flow away
properly.
Freezer section
The freezer is equipped...

Never use cleaning agents
containing abrasive substances
such as sand, soda (sodium
carbonate), acids or chemical
solvents.
Non-abrasive cleaning agents are
also unsuitable as they can cause
matte areas to appear.
Stainless steel surfaces can be
treated using a proprietary
conditioning agent for stainless steel
(available from the Miele Spare Parts
Department). Follow the
manufacturer’s instructions (on the
packaging).
Do not let water enter the electronic
unit, the glass-edge lighting, the
door display...

^After cleaning, wipe the interior and
accessories with a damp cloth, then
dry with a soft cloth. Leave the doors
open to air the appliance for a short
while.
E-Cloth
^A microfibre E-Cloth is available
from the Miele Spare Parts
Department. The E-Cloth is suitable
for cleaning surfaces such as
stainless steel, glass, plastic and
chrome without the use of chemicals.
Cleaning the ice cube tray
(may vary by model)
The ice cubes are formed in a tray
before they are dropped down into the
drawer.
The tray...

Ventilation slits
^The ventilation slits should be
cleaned regularly with a brush or
vacuum cleaner. A build-up of dust
will increase the energy consumption
of the appliance.
Door seals
Do not use any grease or oil on the
door seals, as they will cause the
seals to deteriorate and become
porous over time.
The door seals should be cleaned
regularly with clean water, then wiped
dry with a soft cloth.
Metal grille at the back of the
appliance
The metal grille at the back of the
appliance is the heat...

Repairs to electrical appliances
should only be carried out by a
suitably qualified and competent
person in strict compliance with
current local and national safety
regulations. Repairs and other work
by unqualified persons could be
dangerous. The manufacturer will
not be held responsible for damage
or injury arising from unauthorized
work.
Some minor problems can be corrected
without contacting the Miele Service
Department.
What to do if...
. . . the refrigerator section or freezer
section does not get...

If the appliance was not disconnnected
from the electricity supply and the
light-coloured lines do not disappear,
contact the Miele Service Department.
. . . the alarm sounds, the
temperature display for the freezer
section is flashing, and§%is
flashing in the door display?
The freezer section temperature has
risen above the set temperature
because
^the freezer section door has been
opened too frequently, or large
amounts of fresh food have been put
in at once for freezing.
^the ventilation slits are...

...§appears in the door display.
There is a fault. Call the Service
Department.
...nA appears in the temperature
display, and