Home > Miele > Fridge freezer > Miele K 9214 If Operating And Installation Instructions

Miele K 9214 If Operating And Installation Instructions

Here you can view all the pages of manual Miele K 9214 If Operating And Installation Instructions. The Miele manuals for Fridge freezer are available online for free. You can easily download all the documents as PDF.

Page 41

Freezer compartment door
^Lower the cover on hinge platea.
^Unscrew hinge plateb, and remove
freezer compartment doorc
together with the hinge plate.
^Unscrew door catchd.
^
Screw door catchdinto place on
the opposite side, having turned it by
180 °.
^
Fit the freezer compartment doorc
in position at the tope, then tighten
the hinge plate securelyb.
^
Close the cover on hinge platea.
^
Plug the holes with stoppersf.
Changing the door hinging
41
 

Page 42

All building-in instructions given are
for aright hand hingedappliance.
If you have converted the appliance
to left hand hinging you will need to
adapt these instructions
accordingly.
Building into a peninsular run
When built into a peninsular run, the
rear of the building in niche must be
fitted with a kitchen furniture panel.
Aligning the housing unit
Before installing the appliance, the
housing unit must be carefully aligned
using a spirit level. The housing unit
corners must be at right angles, as...

Page 43

Building in the appliance
^Remove panela.
^Secure bracketbwith screwsc
(4.8 x 16 mm).
^
Attach sealing stripdto the door
opening side so that it sits flush at the
front with the side of the appliance. If
necessary the sealing strip can be
trimmed to size along the lower edge
of bracketb.
^
Push the appliance into its housing
unit.
When doing this, make sure that the
mains cable does not get trapped.
^
Push in the appliance until the front
edges of bracketband hinge plates
eandfare flush with the front...

Page 44

Securing the appliance and
fitting the furniture door
^Push the appliance against the
housing wall on the side on which the
door opens so that the sealing strip is
pressed into the housing wallh.
^
Secure the appliance at the top with
screwi(4 x 19 mm) into bracketb,
pushing the appliance against the
furniture wall as you do so. Then
secure it at the bottom with screwsj
(4 x 36 mm) through the adjusting
screws in the hinge plates to the
housing.
^
Tighten all the screws.^If necessary, align cover...

Page 45

45
 

Page 46

46
 

Page 47

47
 

Page 48

Alteration rights reserved / 4710
K 9212 i, K 9214 iF, K 9412 i, K 9414 iFM.-Nr. 07 923 420 / 00
 
Start reading Miele K 9214 If Operating And Installation Instructions

Related Manuals for Miele K 9214 If Operating And Installation Instructions

All Miele manuals