Miele K 9214 If Operating And Installation Instructions
Here you can view all the pages of manual Miele K 9214 If Operating And Installation Instructions. The Miele manuals for Fridge freezer are available online for free. You can easily download all the documents as PDF.
Page 41
Freezer compartment door ^Lower the cover on hinge platea. ^Unscrew hinge plateb, and remove freezer compartment doorc together with the hinge plate. ^Unscrew door catchd. ^ Screw door catchdinto place on the opposite side, having turned it by 180 °. ^ Fit the freezer compartment doorc in position at the tope, then tighten the hinge plate securelyb. ^ Close the cover on hinge platea. ^ Plug the holes with stoppersf. Changing the door hinging 41
Page 42
All building-in instructions given are for aright hand hingedappliance. If you have converted the appliance to left hand hinging you will need to adapt these instructions accordingly. Building into a peninsular run When built into a peninsular run, the rear of the building in niche must be fitted with a kitchen furniture panel. Aligning the housing unit Before installing the appliance, the housing unit must be carefully aligned using a spirit level. The housing unit corners must be at right angles, as...
Page 43
Building in the appliance ^Remove panela. ^Secure bracketbwith screwsc (4.8 x 16 mm). ^ Attach sealing stripdto the door opening side so that it sits flush at the front with the side of the appliance. If necessary the sealing strip can be trimmed to size along the lower edge of bracketb. ^ Push the appliance into its housing unit. When doing this, make sure that the mains cable does not get trapped. ^ Push in the appliance until the front edges of bracketband hinge plates eandfare flush with the front...
Page 44
Securing the appliance and fitting the furniture door ^Push the appliance against the housing wall on the side on which the door opens so that the sealing strip is pressed into the housing wallh. ^ Secure the appliance at the top with screwi(4 x 19 mm) into bracketb, pushing the appliance against the furniture wall as you do so. Then secure it at the bottom with screwsj (4 x 36 mm) through the adjusting screws in the hinge plates to the housing. ^ Tighten all the screws.^If necessary, align cover...
Page 48
Alteration rights reserved / 4710 K 9212 i, K 9214 iF, K 9412 i, K 9414 iFM.-Nr. 07 923 420 / 00