Miele H 5461 Bp Manual

							The followingSymbolscan appear in addition to the text:
Symbol Meaning
Duration
Start time
Finish
Minute minder time
Core temperature when using the food probe


Arrows will appear if there are more than two options available.
Use theorsensors to scroll through the list.
The end of a list is indicated by a dotted line. By scrolling down
further, you reach the beginning of the list again.
BackConfirming with OK returns you to the previous list of options.
	A tick will appear beside the option which is currently selected.
This indicates additional information that is available.
This information window can be deleted by selecting OK.



The system lock is Permitted.
On = Operation not possible.
Off = Operation possible.
Controls
21 
						

							Your oven has a range of oven functions for preparing a wide variety of recipes.
These include:
Top heat/grill element (under the roof of the oven)
Bottom heating element (under the floor of the oven)
Ring heating element (behind the intake vent for the fan)
Fan (behind the intake vent for the fan)
Evaporation system
These components are combined in various ways, depending on the oven
function selected. See the letters given in brackets for each function.
Functions Notes
Conventional
heat
[+]–For baking traditional recipes, e.g. fruit cake, casseroles.
– Also ideal for soufflés.
– If using an older recipe or cookbook, set the oven
temperature for Conventional heat 10°C lower than that
recommended.
The cooking duration does not need to be changed.
Bottom heat
[]– Use this setting towards the end of baking to brown the
base of a cake, quiche or pizza.
Full grill
[]– The whole grill element is switched on and glows red in
order to create the heat required.
–
For grilling larger quantities of thin cuts (e.g. steaks).
–
For browning food in larger dishes.
Economy
grill
[]–
The inner part of the grill element is switched on and glows
red in order to create the heat required.
–
For grilling larger quantities of flat cuts (e.g. steaks).
–
For browning food in smaller dishes.
Defrost
[+]–
For the gentle defrosting of frozen food.
Functions
22 
						

							Functions Notes
Fan plus
[+]–For baking and roasting.
–You can bake and roast on different levels at the same
time.
–Lower temperatures can be used than with Conventional
heat as the Fan plus system distributes the heated air
around the food.

Automatic
[depending on
programme]–The list of Automatic programmes available will appear in
the display.
Auto roast
[+]You will find this function in the list of Automatic
programmes.
–For roasting.
During the searing phase, the oven is heated up to a high
temperature (230 °C) to sear the meat.
Once this temperature has been reached, the temperature
of the oven is automatically lowered to the set cooking
temperature (continued roasting temperature).
Fan grill
[+]– The grill element and the fan switch on and off alternately.
– For grilling larger items, e.g. rolled meat, poultry.
– The hot air from the grill is distributed over the food by the
fan. This enables a lower temperature to be selected than
when using Full grill/Economy grill.
	Intensive
bake
[++]–
For cooking dishes which require a moist topping and a
crisp base such as pizza and quiche lorraine.
–
Intensive bake is not suitable for baking thin biscuits etc.
or for roasting as the juices will become too dark.
Moisture
plus
[++]–
For baking and roasting with moisture injection.
Functions
23 
						

							To enter basic settings
The oven will switch on automatically
when it is connected to the electricity
supply.
Welcome screen
A welcome screen will appear in the
display, and you will then be requested
to select some basic settings which are
needed before the appliance can be
used.
Follow the instructions in the display.
Setting the language
First select the language you want:
Use theorsensor to scroll
through the list until the language you
want appears highlighted in the
display.
Confirm your selection with the OK
sensor.
A tickwill appear beside the
language you have selected.
If you have selected the wrong
language by mistake, proceed as
described in Settings - Language
to get back to the correct language.
Clock format
The request to select the Clock format
will appear. The default setting for the
clock is 24 h.

Touch theorsensor until the
clock format you want appears
highlighted in the display.

Confirm with OK.Setting the time of day
You will then be asked to enter the time
of day. The hour is highlighted.
Set the hour with theorsensor
and confirm your setting with the OK
sensor.
Then set the minutes in the same way.
Time of day display
You will then be asked when you want
the time of day to show in the display:
–On
The time is always visible in the
display.
– On for 60 seconds
The time is only ever visible for
60 seconds.
– Do not display:
The display remains dark.
Use theorsensor to select the
setting you want and confirm with the
OK sensor.
The oven is now ready for use.
Before using for the first time
24 
						

							Cleaning and heating up for
the first time
Before use, please remove
– any stickers from the oven and
from any accessories.
– any protective foil from the
oven front.
See Cleaning and care for more
information.
Before using the oven for the first time
–takeall accessoriesout of the oven
and wash them.
– thenheat the oven up once with
nothing in it. New ovens can give off
a slight smell on first use. Doing this
will dissipate the smells before you
use it to cook food.
Before heating the oven up it is a
good idea to wipe the interior out with
a damp cloth. This way any dust or
bits of packaging that may have
accumulated in the oven cavity
during storage and unpacking will be
removed.

Press and release the function
selector and the temperature
selector.

Use the function selector to select
Fan plus.
The recommended temperature of
160 °C will appear.

Use the temperature selector to set
the highest temperature (250 °C).The oven will start heating up as soon
as this entry has been accepted.
Heat the empty oven for at least an
hour.
Please ensure the kitchen is well
ventilated during this operation.
Close doors to other rooms to
prevent the smell spreading
throughout the house.
The timer can also be used to set the
finish time. See To use Automatic
switch-off.
Leave the appliance to cool down to
room temperature.
Then wipe the oven interior out with a
solution of hot water and a mild
detergent, and dry it thoroughly with
a soft clean cloth.
Leave the oven door open until the
oven interior is completely dry.
Before using for the first time
25 
						

							Your appliance has a wide range of
Automatic programmes to enable you
to achieve excellent results with
ease.
Simply select the programme for your
food, and follow the instructions in
the display.
The Automatic programmes available
will appear when you select the Auto
-
matic
 function.
A list will appear in the display.
–Auto roast (oven function)
– Slow cooking
– Cakes
– Baked goods
– Bread
– Bread mixes
– Bread rolls
– Pizza
–
Meat
–
Poultry
–
Fish
–
Bakes/gratin
–
Frozen foodSelect the option you require.
Each Automatic programme has a
sub-menu with further options which will
now show in the display.
Each step you need to take before
starting the Automatic programme will
appear in the display.
Depending on the programme you
have selected, further information or
prompts will appear regarding
–the roasting or baking dish,
–the shelf level,
– the use of the food probe,
– the amount of water required for
programmes with Moisture plus,
– the cooking duration.
For further information about the
Automatic programmes, including a
selection of recipes, please refer to
the User instructions and the
Moisture plus recipe book.
Automatic programmes
26 
						

							To operate the oven manually, switch
the appliance on, select the oven
function and temperature, then
switch it off again once you have
finished cooking.
Place the food in the oven.
Select the function you want (e.g. Fan
plus).
The following will appear in the display:
–The function selected (in this example,
Fan plus).
–The recommended temperature
160.
Change the temperature in the
display if necessary, using the
temperature selector.
The oven heating and the cooling fan
will switch on.
The lighting switches off automatically
after approx. 15 seconds. If you wish,
you can set the lighting to be on all the
time. See Settings - Lighting.
You can follow the progress of the
programme in the display.
In addition to the cooking function and
temperature, the words Heating-up
phase will show in the display until the
oven has reached the temperature
selected.
Once the temperature selected has
been reached
–
Heating-up phase will go out in the
display.
–
A signal will sound (provided this is
activated - see Settings - Volume -
Buzzer tones).If you touch the OK sensor during a
cooking programme, the duration, start
time, finish and moisture reduction
options will appear.
At the end of the programme, turn the
function selector to 0 and remove
the food from the oven.
The cooling fan will continue to run for a
while after the oven has been switched
off to prevent any humidity building up
in the oven, on the control panel or on
the oven housing unit.
When the temperature in the oven has
fallen sufficiently, the cooling fan will
switch off automatically.
You can change the default setting for
this (see Settings - Cooling fan
run-on).
Manual operation
27 
						

							Automatic switch-off can be selected
when operating the oven manually.
You can also adjust the heat-up
phase and the humidity level inside
the oven.
To select a function
Select the required function.
The function and recommended
temperature are displayed.
Touch the OK sensor.
Options which can be entered or
changed will now appear in the display:
– Duration
– Start time
– Finish
– Moisture reduction
– Core temp.
(This only appears when the food
probe is being used; see Food
probe in the separate User
instructions supplied with the oven).
Selecting a temperature
Recommended temperatures
As soon as a cooking function is
selected, therecommended
temperaturewill appear in the display.
Function Recommended
temperature
Fan plus 160 °C
	Intensive bake 170 °C
Conventional
heat180 °C
Bottom heat 190 °C
Fan grill 200 °C
Full grill 240 °C
Economy grill 240 °C
Defrost 25 °C
Auto roast* 160 °C
Moisture plus 160 °C
* Initial searing phase temperature
approx. 230 °C, then drops to 160 °C
for continued roasting
To change the temperature
If the recommended temperature is not
suitable, you can use the temperature
selector to change it.
As soon as you turn the temperature
selector, the temperature range for that
function will appear in the display. The
temperature can be changed in
increments of 5 °.
You can also change the
recommended temperature for a
function permanently if you wish, see
Settings - Recommended
temperatures.
More about manual operation
28 
						

							Heating-up phase
Heating-up phase will appear in the
display until the set temperature has
been reached for the first time.
Once the temperature selected has
been reached
–Heating-up phase will go out in the
display.
–A signal will sound (provided this is
activated - see Settings - Volume -
Buzzer tones).
When using Fan plus, Conventional
heatand Auto roast, all the
heating elements and the fan are set at
the factory to switch on during the
heating-up phase so that the
temperature required is reached as
quickly as possible.
You can alter this default setting, if
wished. See Settings - Heating-up
phase.Pre-heating the oven
Most dishes can be placed in a cold
oven. They will then make use of the
heat produced during the heating-up
phase.
It is only necessary to pre-heat the oven
in a few instances:
WithFan plus,
–for foods which cook in less than 20
minutes and for foods such as puff
pastries and yeast mixtures where
instant heat is required to make them
rise quickly.
– for roasting beef/fillet.
WithConventional
– it is usually necessary to pre-heat the
oven.
Change the setting for the
heating-up phase from Rapid to
Normal when baking pizza or
biscuits and small cakes, otherwise
they will brown too quickly from the
top. See Settings - Heating-up
phase.
To pre-heat the oven:

Select the required function and set
the temperature.

Wait for the oven to heat up.

Then place the food in the oven.
29
More about manual operation 
						

							Entering the Duration, a Start
time or Finish time
By entering the Duration, Start time or
Finish time, the cooking process can be
programmed to switch off, or on and
off, automatically.
–Duration
When entering the Duration, you are
entering the time that the food takes
to cook.
Once this time has elapsed, the oven
heating switches off automatically.
The maximum duration that can be
entered is 9 hours 59 minutes.
The Duration cannot be entered if the
food probe is being used as in this
case the length of the cooking
programme depends on the core
temperature being reached.
– Start time
By entering the Start time, you
specify the time you want cooking to
start. The oven will switch on
automatically at the time you have
set.
The Start time can only be used in
conjunction with Duration or Finish,
except when using the food probe.
–
Finish
By entering the Finish time, you
specify the time you want cooking to
finish. The oven will switch off
automatically at the time you have
set.
A Finish time cannot be entered if the
food probe is being used as in this
case the end of the cooking
programme depends on the core
temperature being reached.To enter the time
Select the required function and set
the temperature.
Touch the OK sensor.
Using theorsensors, scroll
through until the option required
(Duration, Start time or Finish) is
highlighted.
Touch the OK sensor.
Depending on the option selected, the
following will come up in the display:
–Duration:0:00 h:min
– Start time:--:--
– Finish:--:--
The hour (to the left of the colon) is
highlighted.
Use theorsensors to first select
the hour, and confirm your selection
with the OK sensor.
After setting the hour, the minutes will
be highlighted.

Now use theorsensors to select
the hour, and confirm your selection
with the OK sensor.
If no cooking duration has been
entered, and you have simply
entered a Start time or Finish, then
– touching thesensor adds an
hour to the time of day
– touching thesensor deducts
an hour from the time of day.
More about manual operation
30