Miele G 7893 Manual

Drainage
–The drainage system is fitted with a
non-return valve which prevents dirty
water from flowing back into the
machine via the drain hose.
–The machine should preferably be
connected to aseparatedrainage
system on-site.
If separate drainage is not available,
contact your Miele application
specialist for professional advice.
The on-site drain connection point
should be sited between 0.3 m and
1mabove the lower edge of the
machine.
If it is lower than 0.3 m, lay the hose
in a curve at a height of at...

Programme When to use
AFreely programmable programme (programmed by a Miele authorised service
technician).
B
INORGANICFor the removal of inorganic residues;
general analysis and water analysis, suitable for low to medium soiling levels and
for medium to high quality rinse requirements.
C
ORGANICFor the removal of organic residues such as oil, grease, wax and agar. Suitable
for preparation and analytical applications with medium to high levels of soiling
and medium quality rinse requirements....

Programme sequence
Pre-wash
12Main wash
12Rinse
12Rinse
34Final rinses*
12Dryingx
12
CW HW
DOS 1
80°C
3 minHW
DOS 3HW AD AD
75°C
1 min99°C 70°C
25 min 5 min
CW
DOS 3
50°C
1 minHW
DOS 1
75°C
3 minHW
DOS 3AD AD AD
70°C
1 min99°C 70°C
25 min 5 min
HW HW
DOS 1 DOS 1
65°C 85°C
3 min 3 minHW
DOS 3HW AD AD
80°C
1 min99°C 70°C
25 min 5 min
HW
DOS 1
75°C
3 minHW
DOS 3AD AD
75°C
1 min99°C 70°C
25 min 5 min
CW HW
DOS 1
80°C
3 minHW
DOS 3HW AD AD
75°C
1 min99°C 70°C
25 min 5 min
CW HW
DOS 1
85°C
3 minHW
DOS 3AD AD...

Height with lid
Height without lid85 cm
82 cm
Width 60 cm
Depth
Depth with door open60 cm
120 cm
Weight (net) 70 kg
Voltage, connected load, fuse rating See data plate
Mains cable Approx. 1.8 m
Water temperature:
Cold water
Hot and AD waterMax. 20 °C
max. 70 °C
Static water pressure Max. 1000 kPa (10 bar) pressure
Minimum flow pressure:
Cold/hot water inlet connections
AD water connection100 kPa pressure
60 kPa pressure
Recommended flow pressure:
Cold/hot water inlet connections
AD water connection0250...

75 

Alteration rights reserved / 3607M.-Nr. 07 125 650 / 00