Miele F 1471 Vi Operating And Installation Instructions

To reduce the risk of electrical
shock, disconnect the appliance
from the power supply by shutting
off the power main, tripping the
circuit breaker or unplugging the
power cord before maintenance.
Never use cleaning agents
containing abrasive substances
such as sand, soda, acids, chlorides
or chemical solvents.
Non-abrasive cleaning agents are
also unsuitable, as they can cause
matte areas to appear.
Only use a mild solution of warm
water and liquid dish soap to clean
this appliance.
Do not use a steam...

Aluminum frames
The frames of the door bins and
shelves are made of aluminum.
^Clean with a mild solution of warm
water and liquid dish soap.
Aluminum is susceptible to
scratches and nicks, treat with care.
The aluminum frames may become
discolored or otherwise altered if
soiling is not cleaned away
promptly.
Do not use stainless steel cleaners;
lime removers; scouring pads, such
as pot scrubbers; or used sponges
that still contain abrasive cleanser
residue to clean the frames.
Ice cube container
^Pull...

Ventilation slits
^Check the ventilation slits in the base
panel regularly. Remove any
dirt/dust with a vacuum cleaner or
brush. Clean as needed.
Door seals
Do not use any oils or grease on the
door seals. This may cause the
seals to deteriorate and become
porous over time.
^Clean the door seals with warm water
and dry thoroughly.
After cleaning
^Return all shelves and accessories.
^Plug in the appliance and turn it on
with the main switch.
^Switch on the SuperCool function.
The freezer section will cool...

Changing the light bulb
The lighting automatically switches off
after the door has been open for
approx. 10 minutes. This is not a fault.
If the light does not come on when the
door is opened briefly, the light bulb
should be changed.
^Use the main switch to turn the
appliance off.
To reduce the risk of electric shock,
disconnect the appliance from the
power supply by unplugging or
tripping the circuit breaker.
Upper lighting
^
Grasp the front of the light cover with
both hands, and slide it back.
^...

Side lighting
^Turn the light cover counterclockwise
and pull out.
Never touch a halogen bulb with
bare fingers.
When inserting a glass halogen bulb
always hold with a soft cloth.
^
Pull the defective light bulb from the
socket.
^
Place the new bulb in the socket.
Halogen bulb type:
5 W/12 V/socket G 4.
^
Put the light cover back on and turn
clockwise into place.
^
Restore power to the appliance.Ice/Water Dispenser lighting
Do not remove the light cover for the
dispenser lighting. Should the
lighting...

The water filter improves the taste and
smell of ice cubes by removing chlorine
and other substances from the
incoming tap water.
It is important to change the water
filter regularly.
To avoid serious illness or death, do
not use water that is
microbiologically or chemically
unsafe or of unknown quality without
adequate disinfection or other
treatment before or after use of a
filter.
Note:
– After installing a new water filter and
switching on the ice maker, discard
the first 24 hours worth of ice...

Exchanging the water filter
^Push in and rotate the filter cap on
the base panel of your appliance
counterclockwise 180°,1.
^Pull the used filter cartridge out of the
appliance,2.
^
Remove the cap from the used filter,
3.
^
Take a new filter cartridge out of the
packaging and remove the protective
cap.
^
Push the cap onto the new filter
cartridge,4.^Push the filter cartridge with cap, in a
horizontal position, all the way into
the opening in the base panel,5.
^Rotate the filter cartridge clockwise
180°...

Re-setting the filter indicator
The filter indicator still flashes in the
display.
^Touch the access button psoit
turns yellow.
^Note the position of the buttonX, but
do not touch.
^Touch the access button p again so
it turns white.
Only the access button p is visible.
^Place one finger on the position of
theXbutton and hold (theXbutton
will not be visible).^While holding down theXbutton,
press the access button p once.
Keep holding theXbutton down until
the following appears in the display
(approx. 5...

^Tap theXbutton until^-appears in
the display.
^Touch the access button p.
^Tap theXbutton until;appears in
the display.
^Touch the access button p.
You have left the Custom settings
mode.
The filter indicator is no longer visible
on the control panel.
When you are in the Custom settings
mode the door alarm is turned off
automatically. Once the door is
closed it is reactivated.
After installing a new water filter
discard the first 24 hours of ice
production.
Deactivating the water filter
The ice cube...

Filter Performance Data Sheet
40
State of California
Department of Public Health
Water Treatment Device
Certificate Number
Date Issued:  March 10, 2006
T
rademark/ModelDesignationReplacementElements
Date Revised:  April 3, 2008
177506 -
9000 077095 9000 077104
Miele 07134220 07134220
Manufacturer:Cuno, Incorporated
T
hewatertreatment device(s)listedonthiscertificatehavemetthetestingrequirements pursuant toSection116830of theHealth andSafetyCodefor thefollowinghealth related contaminants:
Cysts...