Midway Kart Fury 39in Operations Manual

C.A.R.T. FURY9
CHAPTER 5 WIRING
SOUND I/O BOARD LED INDICATOR STATUS TABLE
Notes on SIO LED Indicator Status
1. Software controls this LED. Indications are game and revision specific. Changing the EPROM’s on this 
board may alter the function of this LED. Firmware damage may also cause new or different LED 
behavior.
2. Hardware controls this LED. Indications depend on hard-wired circuitry. A change in normal LED
behavior may indicate a circuit fault. Changing the EPROM’s on this board shouldn’t alter...

10 MIDWAY AMUSEMENT GAMES, LLC 
CHAPTER 5 WIRING
CPU BOARD LED INDICATOR STATUS TABLE
Notes on LED Indicator Status
1. LED 1 monitors CPU power (+3.3V). If this LED is off or blinking, investigate processor circuits. If other 
LED’s are off or blinking at the same time, check +5V circuits or the game power supply.
2. LED 2 flashes when the hard disk is operating during game play. LED 2 may light continuously during
start-up. If this LED remains lighted, the hard drive may be locked-up or faulty.
3....

CHAPTER SIX
C.A.R.T. FURY 
• Before servicing electronics, turn off AC power to the VGM. Wait for capacitors to discharge.
 Before touching or handling electronic assemblies, discharge static electricity on your body. To dis-
charge static, begin by connecting the line cord to a properly grounded outlet, but do not turn on the 
power! Next, touch the safety ground stud of the power supply chassis.
 Store electronic assemblies in an anti-static area. Use anti-static bags to store or transport circuit...

TROUBLESHOOTING - 2 MIDWAY AMUSEMENT GAMES, LLC 
COIN MECHANISM AND PRICING TROUBLESHOOTING 
Symptom Cause Required Action
Video Game Machine 
(VGM) accepts cur-
rency or tokens, but 
number of credits per 
coin or bill is incorrect. Improper settings 
at Pricing Menu1. Press and hold TEST MODE switch inside coin 
door to enter Menu System. Select SWITCH 
TEST from Diagnostics menu. Conduct test to 
confirm operation of game switches.
2. Select either the STANDARD or CUSTOM PRIC-
ING MENU from Game...

C.A.R.T. FURY TROUBLESHOOTING - 3
START UP TROUBLESHOOTING 
Symptom Cause Required Action
Video Game Machine 
(VGM) does not start.
VGM appears com-
pletely non-functional.
No audio
No illumination
No video displayPower problem 1. Check power is switched on.
2. Make sure fans are turning. If not: Is the power
supply connected to its power cable? Is power
supply turned on?
3. Plug cord into AC power outlet. Verify presence of
AC line voltage.
Improper line volt-
age switch setting1. Turn off power....

TROUBLESHOOTING - 4 MIDWAY AMUSEMENT GAMES, LLC 
Video Game Machine 
(VGM) does not start.
VGM accepts cur-
rency or tokens.
Audio and video are 
present.Faulty wiring 1. Assure no wires are caught in hinges, latches or 
switch contacts.
2. Check wiring continuity from circuit board connec-
tors to acceptors.
Video Game Machine 
(VGM) appears non-
functional.
Currency acceptor 
price indicator is illumi-
nated.Power problem 1. Inspect circuit boards under low-light conditions. 
The LED’s glow and...

C.A.R.T. FURY TROUBLESHOOTING - 5
LINKING PROBLEM TROUBLESHOOTING 
Symptom Cause Required Action
Cannot connect multi-
ple Video Game 
Machines (VGMs)  
togetherFaulty wiring  1. Do not extend linking cables supplied with VGM.
2. Install required crossover between cabinets. Each
coupler connects two VGMs (one pair). Do not use
standard telephone type couplers or wiring for link-
ing.
3. Use only 10 Base-T, Ethernet-type, Category 5,
twisted-pair wiring. 
Improper linking 
hardware1. Use required network...

TROUBLESHOOTING - 6 MIDWAY AMUSEMENT GAMES, LLC 
LINKING PROBLEM TROUBLESHOOTING 
Symptom Cause Required Action
Some Video Game 
Machines (VGMs) in 
group link properly, 
while others do notImproper hub 
switch setting1. Assure switches on hub are set according to Hub 
Link Kit instructions. (VGMs on a network do not 
require couplers. Hub has electronic crossover.)
2. Inspect hub indicator lights for link activity. See
manufacturer’s literature for diagnostics.
Wrong software 
versionVerify all linked...

C.A.R.T. FURY TROUBLESHOOTING - 7
PLAYER CONTROL TROUBLESHOOTING
Symptom Cause Required Action
Intermittent or com-
pletely non-functional 
player controls
Video Game Machine 
(VGM) starts normally.Faulty switches or 
lamps1. Press and hold TEST MODE switch inside coin 
door to enter Menu System. Select SWITCH 
TEST from Diagnostic Menu. Conduct tests to 
confirm switch operation.
2. Press and hold TEST MODE switch inside coin
door to enter Menu System. Select LAMP TEST
from Diagnostic Menu. Conduct...

TROUBLESHOOTING - 8 MIDWAY AMUSEMENT GAMES, LLC 
Sloppy, unpredictable 
or ineffective steering
Video is present
Video Game Machine 
(VGM) operates nor-
mallyBlocked or faulty 
fanFan located on power supply functions as an exhaust 
fan. With power on, check airflow near each fan to 
assure that nothing blocks airflow. 
Faulty mechani-
cal partsTurn off power. Open dashboard. Support steering 
wheel and remove outer mounting screws. Remove 
metal shield (if VGM has one) over motor. Inspect for 
faulty...