Midway Cruis N Exotica 39 Dedicated Game Operations Manual

Operation - 5  Video Game Machine Array
 SET-UP
1. Remove all items from the shipping containers and set them aside.  Remove all packing material.
Inspect the exterior of the main cabinet, control cabinet and the seat pedestal for any damage.WARNING
The cabinet is top heavy. Do not push against plastic parts during movement.2. Remove the keys from the steering wheel.  Unlock and open the rear door, and the coin and cash
boxes. Electrical cords, mechanical components, and assorted spare parts are packed...

Operation - 6Location of Casters and Levelers
4. The main cabinet is mounted on four swivel casters.  Roll the cabinet to its intended location,
maintaining clearance between the cabinet and walls, drapes, other games or obstructions. Roll the
control cabinet near the main cabinet, leaving enough space to attach the wiring harness.  Mate each
cable from the control cabinet to the main cabinet. Press firmly, but do not force, the keyed
connectors to seat the contacts. Slide the control cabinet toward the...

Operation - 7 5. Lower and adjust each leg leveler on the control cabinet until it is stable and level.  Adjust the levelers
until the bottoms of both pieces are flush and parallel with each other.  Inspect for binding or pinched
wires.  Align the bracket holes with the mounting holes in the base of the control cabinet.  Insert and
firmly tighten the remaining fasteners to attach the two pieces together as a single unit.
6. The pedestal assembly mounting rails are shipped bolted to the inside of the...

Operation - 8Rear Hasp Installation
12. Reinstall the rear door onto the cabinet and close it.  Lock the rear door and remove the key.  If
required, install the extra padlock through the hasp at this time.  Install the screws at the top and
sides of the rear door and tighten snugly. Leave the remaining doors open at this time.
13. Install the blue beacon light. The beacon light and required mounting hardware is shipped inside the
coin box with the spare parts. Mate the cable connector from the beacon...

Operation - 9 14. The power cord is packed in with the spare parts.  Insert a portion of the line cord in the cord clamp
leaving enough slack for the cord. Match the holes on the IEC plug with the prongs in the receptacle
and push firmly to seat the line cord.Line Cord Installation
15. Plug the game into a grounded (3-terminal) AC wall outlet.  Switch on power to the game using the
ON/OFF switch located on the upper left top of the cabinet (when viewed from the player’s position).
The game will power up...

Operation - 10 21. Return to the Main Menu screen, then choose CALIBRATE CONTROLS.  Follow the on-screen
instructions to set steering limits.  If no errors are found, the controls will have the maximum
accuracy.
22. Return to the Main Menu screen, and then choose EXIT.  The game will automatically enter its
“attract” mode of operation (scenes and sounds from typical races, player’s scores, messages, etc.).
23. Insert currency or tokens and play a game.  Change the volume and make any other adjustments....

Operation - 11 The system enters Attract Mode once it passes all power-up tests. The Attract Mode screen will cycle
endlessly and display a variety of scenes and sounds from a typical race on any given track.  The system
does not exit Attract Mode until the desired amount of coins or tokens is inserted and game play
commences.
NOTE:  An error message appears on screen and the game does not enter start up if an error is detected
during the Start-Up Test. Record any messages before attempting to service...

Operation - 12 GAME OPERATION
Access to the menu system for statistics, adjustments, and testing is secured by a keyed lock to prevent
tampering.  When the menu system is entered, on screen messages guide the operator through tasks.
CABINET SWITCHES
¨ The ON/OFF SWITCH is located on the top right side of the cabinet.
¨ The REMOTE MONITOR ADJUSTMENTS are located inside the coin vault.  Use the monitor test
screens with these controls to adjust the video image size, brightness, contrast, etc.
¨ The SLAM...

CRUIS’N EXOTICA CRUIS’N EXOTICA
™ ™
S E C T I O N S E C T I O N
TWO TWOAdjustment, Diagnostic & Audit Adjustment, Diagnostic & Audit
Menus Menus 

Diagnostics - 2 MENU SYSTEM
WHAT IS THE MENU SYSTEM?
The game’s Menu System is a series of auditing, game adjustments and diagnostic screens. You can
easily access and apply these screens to optimize game performance. For instance…
Ø Use game audit screens to assess game performance.
Ø Use adjustment screens to help you customize game performance. For example, you can restore
factory default game settings. You can also calibrate player controls for player accuracy.
Ø Use diagnostic screens to verify...