Midway Cruis N Exotica 39 Dedicated Game Operations Manual

							Operation - 5  Video Game Machine Array
 SET-UP
1. Remove all items from the shipping containers and set them aside.  Remove all packing material.
Inspect the exterior of the main cabinet, control cabinet and the seat pedestal for any damage.WARNING
The cabinet is top heavy. Do not push against plastic parts during movement.2. Remove the keys from the steering wheel.  Unlock and open the rear door, and the coin and cash
boxes. Electrical cords, mechanical components, and assorted spare parts are packed inside the
cash box.
3. Install one nut onto each leg leveler. Tilt as needed to locate four threaded holes under both the main
cabinet and control cabinet, and three holes under the pedestal. Install a leveler and nut into each
hole. Do not tighten nuts at this time. 
						

							Operation - 6Location of Casters and Levelers
4. The main cabinet is mounted on four swivel casters.  Roll the cabinet to its intended location,
maintaining clearance between the cabinet and walls, drapes, other games or obstructions. Roll the
control cabinet near the main cabinet, leaving enough space to attach the wiring harness.  Mate each
cable from the control cabinet to the main cabinet. Press firmly, but do not force, the keyed
connectors to seat the contacts. Slide the control cabinet toward the main cabinet between the
mounting brackets, guiding the harness and cables into the main cabinet.Mounting Bracket Location 
						

							Operation - 7 5. Lower and adjust each leg leveler on the control cabinet until it is stable and level.  Adjust the levelers
until the bottoms of both pieces are flush and parallel with each other.  Inspect for binding or pinched
wires.  Align the bracket holes with the mounting holes in the base of the control cabinet.  Insert and
firmly tighten the remaining fasteners to attach the two pieces together as a single unit.
6. The pedestal assembly mounting rails are shipped bolted to the inside of the control cabinet. Remove
all of the ¼ -20 hex-head bolts used to fasten the rails inside the cabinet and set aside.  Individually
pull each rail out of the cabinet, flip it end for end, and reinsert it. See diagram for proper placement.
Fasten the rail to the inside of the control cabinet with the bolts until finger tight. Do not tighten these
bolts at this time, as some movement is required in the mounting rails to align holes with pedestal
assembly.Location of Pedestal Assembly Mounting Holes
7. Roll the pedestal section near the control cabinet, leaving enough space to attach the wiring harness.
Mate cables between the pedestal and the control cabinet. Press firmly, but do not force, the keyed
connectors to seat the contacts.  Ensure no wires are pinched during pedestal attachment.
8. Align the opening in the pedestal with the ends of the rails.  Slide the pedestal forward onto extended
mounting rails and align the holes.  Attach pedestal assembly using 1/4-20 tamper resistant screws
and large flat washers.  A T27 wrench is included with the spare parts to tighten these screws firmly.
Tighten the hex head bolts after the tamper resistant screws have been tightened.
9. Lower and adjust each leg leveler until the pedestal section is stable and level.  Adjust the levelers
until the bottoms of all pieces are flush and parallel with each other.  Inspect for binding or pinched
wires. Insert and firmly tighten the remaining fasteners to attach the two pieces together as a single
unit.
10. An extra padlock may be installed to secure the rear door.  A hasp is located in the spare parts bag.
Remove the two lock bracket nuts from inside the cabinet, above the rear door opening.  Slide the
hasp bracket onto the bolts so that it protrudes from the hole in back of the cabinet, then reinstall
nuts.
11. Modify the lock plate at the top of the rear door.  Remove the bolts and nuts from the lock plate, then
rotate the plate so that the slot will be above the door.  Reinstall the bolts and nuts and tighten firmly. 
						

							Operation - 8Rear Hasp Installation
12. Reinstall the rear door onto the cabinet and close it.  Lock the rear door and remove the key.  If
required, install the extra padlock through the hasp at this time.  Install the screws at the top and
sides of the rear door and tighten snugly. Leave the remaining doors open at this time.
13. Install the blue beacon light. The beacon light and required mounting hardware is shipped inside the
coin box with the spare parts. Mate the cable connector from the beacon light to the main cabinet
wiring. Press firmly, but do not force, the keyed connectors to seat the contacts.  Align the light with
the pre-drilled holes along the topside of the marquee and secure in place with the hardware
supplied.NOTICE
Only install the beacon light once the 39” game cabinet is situated in the permanent intended location.
The 39” game cabinet will not fit through the average doorway once the beacon light is installed due to
an overall height dimension increase.  Remove the beacon light whenever the cabinet is transported
or moved to another location.Beacon Light Installation 
						

							Operation - 9 14. The power cord is packed in with the spare parts.  Insert a portion of the line cord in the cord clamp
leaving enough slack for the cord. Match the holes on the IEC plug with the prongs in the receptacle
and push firmly to seat the line cord.Line Cord Installation
15. Plug the game into a grounded (3-terminal) AC wall outlet.  Switch on power to the game using the
ON/OFF switch located on the upper left top of the cabinet (when viewed from the player’s position).
The game will power up and begin its self test.  If no errors are found, the game will automatically
enter the attract mode of operation (scenes and sounds from typical races, player’s scores,
messages, etc.).
16. Open the coin door.  Press and hold the Begin Test button on the operator control switch panel to
enter the menu system.  Wait until the Main Menu screen appears on the monitor.Typical Coin Door Switch Location
17. Follow on-screen instructions to select Diagnostics, then choose SWITCH TEST.  Follow the on-
screen instructions to verify that each of the controls is operational.  If no errors are found, the
controls should function well.
18. Return to the Diagnostics screen, then choose MOTION TEST.  Follow the on-screen instructions to
verify that motion seat is operational.  If no errors are found, the seat should function well.
19. Return to the Diagnostics screen, then choose SOUND BOARD TEST.  Follow the on-screen
instructions to verify that each of the speakers is operational.  If no errors are found, the audio should
function well.
20. Return to the Diagnostics screen, then choose STEERING WHEEL TEST.  Follow the on-screen
instructions to verify the presence of steering resistance. If no errors are found, the aim will be good. 
						

							Operation - 10 21. Return to the Main Menu screen, then choose CALIBRATE CONTROLS.  Follow the on-screen
instructions to set steering limits.  If no errors are found, the controls will have the maximum
accuracy.
22. Return to the Main Menu screen, and then choose EXIT.  The game will automatically enter its
“attract” mode of operation (scenes and sounds from typical races, player’s scores, messages, etc.).
23. Insert currency or tokens and play a game.  Change the volume and make any other adjustments.
Close and lock all open doors.  Tighten the leveler nuts and engage the caster locks.
MAINTENANCE
¨ Viewing Glass
It is not necessary to switch off power to the game to clean the glass.  Apply a mild glass cleaner to a
clean cloth or sponge and wipe the viewing glass.  Do not apply the cleaner directly on the glass!
Liquid could drip down into switch or control circuits and cause erratic game operation.
¨ Player Controls
Use plastic-safe, non-abrasive cleaners to avoid damage.  Apply cleaner to a clean cloth or sponge
and wipe the player controls.  Do not apply the cleaner directly on the controls!
¨ Cabinet and Seat
Use plastic-safe, non-abrasive cleaners to avoid damage.  Apply cleaner to a clean cloth or sponge
and wipe the seat or cabinet.  Do not apply cleaner directly on artwork or cabinet!
GAME FEATURES
CRUIS’N EXOTICA™ ships configured for one-player game play.  Up to four cabinets may be linked to
promote player competition.
Cruis’n Exotica™ is the latest, most thrilling and adventurous driving game in the Cruis’n™ video game
series. Players can select tracks located in nearly a dozen exotic locales around the globe. From Tibet to
Atlantis, Mars to Hong Kong, it is every player’s goal to rack up high scores and mileage points.
Speeding on their way toward a first place finish, drivers listen to cool tunes on the radio as they pass
palms swaying in the breeze, 3-Dimensional animals cavorting roadside, and a variety of shortcuts hidden
along the way. A player’s combined speed and skill virtually assure a place in the winner’s circle.
Player incentives, like free games for top speeds and distance, are sure to captivate players and ensure
many trips around the track. A player finishing in first place soon discovers they have been whisked away
on a free trip to an exotic locale. (Player incentives are Operator Optional and enabled at the Operator’s
discretion)
For added excitement the dashboard now features a keypad. Player’s are encouraged to maintain a
personal access code and to use the keypad to recall player statistics. Player statistics record mileage,
win-to-loss ratio and high scores. As soon as the personal access code is entered, the stored player
name and information is instantly recalled and displayed onscreen.
STARTING UP
Each time power is switched on or restored to the game machine, the system enters Start-up Tests.  A
rug pattern appears on the CRT screen.  When the rug pattern ends, the screen shows a CPU Board
map.  Bad ICs are indicated in red, good ICs are in green.  The software revision level is shown at the top
of the screen.
A status screen to report on network activity will appear for about ten seconds. This screen is used to
verify and troubleshoot connections on an array of cabinets. 
						

							Operation - 11 The system enters Attract Mode once it passes all power-up tests. The Attract Mode screen will cycle
endlessly and display a variety of scenes and sounds from a typical race on any given track.  The system
does not exit Attract Mode until the desired amount of coins or tokens is inserted and game play
commences.
NOTE:  An error message appears on screen and the game does not enter start up if an error is detected
during the Start-Up Test. Record any messages before attempting to service the game.
GAME RULES AND OBJECTIVES
The game is configured for one-player game play, but up to four cabinets may be linked at one time to
promote multiple player competition. To enter Game Mode, individual player(s) must insert the required
amount of currency or tokens, press the Start button, and select a car and track. The main objective of
the game is to earn top ranking against other drivers.
PLAYER CONTROLS
¨ Start button
The start button is used to begin game play or to select certain features before a race.
¨ Radio button
The radio button allows the player to turn radio sounds on and off, and to change stations.
¨ Lo button
This button shows the view from the driver’s seat inside the vehicle.  This is a normal driver view.
¨ Cam button
This button shows the view from directly above.  The player can see the front end of the vehicle.
¨ Hi button
     This button shows an aerial view of the vehicle.  This is what a helicopter camera would see.
¨ Pedals
The gas and brake pedals control vehicle speed. Press the gas pedal twice to create a power boost.
¨ Seat Position Adjuster
The seat position may be changed at any time, even during competition. Pull the adjustment lever to
the left while seated then slide the seat forward or backward. Release the lever to lock the seat into
position. Player Control Locations 
						

							Operation - 12 GAME OPERATION
Access to the menu system for statistics, adjustments, and testing is secured by a keyed lock to prevent
tampering.  When the menu system is entered, on screen messages guide the operator through tasks.
CABINET SWITCHES
¨ The ON/OFF SWITCH is located on the top right side of the cabinet.
¨ The REMOTE MONITOR ADJUSTMENTS are located inside the coin vault.  Use the monitor test
screens with these controls to adjust the video image size, brightness, contrast, etc.
¨ The SLAM TILT SWITCH detects any forceful vibrations against the coin door.  This eliminates
pounding for free games.  It is located on the inside of the coin door opening near the lock.
NOTE: The Slam switch is not present on Dollar Bill Validator (DBV) ready doors.
CONTROL BUTTONS
¨ The TEST BUTTON activates the game Menu System.  Press the Test button to access the Main
Menu and select individual diagnostics, audits, utilities, etc.
¨ The VOLUME UP BUTTON moves up through the menu selections or adjustment items and raises
the sound level in game play.  A distinct sound accompanies the activation of this button.
¨ The VOLUME DOWN BUTTON can be used to move down through the menu selections or
adjustment items and to lower the sound level in game play.  A sound will accompany the activation
of this button.
¨ The SERVICE CREDIT BUTTON is used to allot credits without affecting the games bookkeeping
total.  This button is also used to get out of a menu selection or return to the main menu.Typical Coin Door Switch Location 
						

							CRUIS’N EXOTICA CRUIS’N EXOTICA
™ ™
S E C T I O N S E C T I O N
TWO TWOAdjustment, Diagnostic & Audit Adjustment, Diagnostic & Audit
Menus Menus 
						

							Diagnostics - 2 MENU SYSTEM
WHAT IS THE MENU SYSTEM?
The game’s Menu System is a series of auditing, game adjustments and diagnostic screens. You can
easily access and apply these screens to optimize game performance. For instance…
Ø Use game audit screens to assess game performance.
Ø Use adjustment screens to help you customize game performance. For example, you can restore
factory default game settings. You can also calibrate player controls for player accuracy.
Ø Use diagnostic screens to verify proper equipment operation.
   ACCESSING THE MENU SYSTEM
Open the coin door. Locate and press the TEST MODE switch. The game system will exit game Attract
Mode and enter Diagnostic Mode. The system runs a brief self-test, and then displays the Main Menu.
The Main Menu is the opening screen of the Menu System.
Game audits, adjustments and diagnostics are line items on the Main Menu. Selecting an item opens its
submenu. Every submenu presents various options that you may act upon.
CRUIS’N EXOTICA DIAGNOSTICSMAIN MENUDIAGNOSTIC MENUGAME AUDITSADJUSTMENT MENUUTILITIESCALIBRATE CONTROLSADJUST VOLUMEEXITVERSION INFORMATIONVERSION:DATE:BUILD:SERIAL:CHIP DATE:PRESS VOLUME UP/DOWN BUTTONS TO SELECTPRESS TEST BUTTON TO ACTIVATEPRESS SERVICE CREDIT BUTTON TO EXITTypical Main Menu Screen
MENU LAYOUT
Observe that each menu screen basically uses the same layout. The game ID, Serial Number, and Date
of Manufacture will appear on most of the menu screens.  These numbers will be helpful to factory
personnel when referring to your game for parts or service.
Ø The block at the top of each screen displays the current menu title.
Ø Data, such as menu items and video reports, etc., appears in the center of the screen.
Ø Messages, for example explanations and active control functions, etc., appear at the bottom of the
screen.
MENU NAVIGATION TOOLS
Use the operator control buttons located inside the coin door to navigate menus. Press the Volume Up or
Volume Down buttons to scroll through the menu options.  Notice the options sequentially become
highlighted. Press the Test button to select a highlighted option and access the next menu level. Press
the Service Credit button to exit from a menu option screen. NOTE: Only one highlighted option can be
selected at a time.
To return to play mode, press the Service Credit button while in the Main Menu screen.