Midway Cruis N Exotica 39 Dedicated Game Operations Manual

CRUIS’N EXOTICA...

Troubleshooting - 2 Coin Mechanism and Pricing Troubleshooting Table
SYMPTOMCAUSEREQUIRED ACTIONImproper settings at
Pricing Menu1. Press and hold TEST MODE switch inside coin
door to enter Menu System. Select SWITCH
TEST from Diagnostics menu. Conduct test to
confirm operation of game switches.
2. Select either the STANDARD or CUSTOM
PRICING MENU from Game Adjustments Menu.
Verify units and credits are set correctly.· Video Game Machine (VGM)
accepts currency or tokens,
but number of credits per
coin or...

Troubleshooting - 3 Coin Switch and Meter Wiring
FACTORY STANDARDOPTIONAL WIRINGINCORRECT WIRING
A connection between JAMMA coin input pins will cause twice the desired credits for each coin inserted.
A coin meter with a defective or missing diode may eventually damage driver circuits on the CPU Board. 

Troubleshooting - 4 Startup Troubleshooting Table
SYMPTOMCAUSEREQUIRED ACTIONPower problem1. Check power is switched on.
2. Make sure fans are turning. If not: Is the power
supply connected to its power cable? Is power
supply turned on?
3. Plug cord into AC power outlet. Verify presence
of AC line voltage.Improper line voltage
switch settingTurn off power. Unplug AC line cord. Check line
voltage switch. If necessary, set it to agree with
local AC line voltage. Retest game.Open fuse1. Turn off power....

Troubleshooting - 5 Startup Troubleshooting, continued
SYMPTOMCAUSEREQUIRED ACTIONPower problem1. Inspect circuit boards under low-light conditions.
The LED’s glow and the fan turns when
processor circuits receive voltage and indicate
presence of DC from power supply. However,
voltages or signals may not be normal.
2. Turn on power. Set the digital voltmeter to the
20-volt DC setting and measure DC voltages at
power connector pins. Adjust the +5V source if
necessary. Refer to the Cabinet Wiring Diagram...

Troubleshooting - 6 Startup Troubleshooting, continued
SYMPTOMCAUSEREQUIRED ACTIONFaulty coin
mechanism1. Unlock and open coin door. Check each currency
acceptor to assure proper mounting. Verify each
release latch is closed and locked.
2. Test mechanism with good and bad coins to see
if mechanism accepts and rejects currency
correctly.
3. Inspect to see if external acceptor indicators
(Pricing, Flashing Arrows, etc.) are lit.
4. Verify each acceptor operates properly by
placing it in working game....

Troubleshooting - 7  Linking Problem Troubleshooting Table
SYMPTOMCAUSEREQUIRED ACTIONFaulty wiring1. Do not extend linking cables supplied with VGM.
2. Install required crossover between cabinets.
Each coupler connects two VGMs (one pair). Do
not use standard telephone type couplers or
wiring for linking.
3. Use only 10 Base-T, Ethernet-type, Category 5,
twisted-pair wiring.· Cannot connect multiple
Video Game Machines
(VGMs)  together
Improper linking
hardwareUse required network hub for your local...

Troubleshooting - 8 Linking Problem Troubleshooting, continued
SYMPTOMCAUSEREQUIRED ACTIONImproper hub switch
setting1. Assure switches on hub are set according to Hub
Link Kit instructions. (VGMs on a network do not
require couplers. Hub has electronic crossover.)
2. Inspect hub indicator lights for link activity. See
manufacturer’s literature for diagnostics.Wrong software
versionVerify all linked VGMs use same version of
software. Error message “VERSION
MISMATCH” will appear if you try to link...

Troubleshooting - 9 Player Control Troubleshooting Table
SYMPTOMCAUSEREQUIRED ACTIONFaulty switches or
lamps1. Press and hold TEST MODE switch inside coin
door to enter Menu System. Select SWITCH
TEST from Diagnostic Menu. Conduct tests to
confirm switch operation.
2. Press and hold TEST MODE switch inside coin
door to enter Menu System. Select LAMP TEST
from Diagnostic Menu. Conduct tests to confirm
lamp operation.
3. Check for loose parts or wires caught in switch
contacts.
4. Check continuity at each...

Troubleshooting - 10 Player Control Troubleshooting, continued
SYMPTOMCAUSEREQUIRED ACTIONBlocked or faulty fanFan located on power supply functions as an
exhaust fan. With power on, check airflow near
each fan to assure that nothing blocks airflow.Faulty mechanical
partsTurn off power. Open dashboard. Support
steering wheel and remove outer mounting
screws. Remove metal shield (if VGM has one)
over motor. Inspect for faulty or worn belts,
bearings, couplings, gears, etc.Faulty Wheel Driver
Board1....