Midway Cruis N Exotica 27 Dedicated Game Operations Manual

Operations - 5
  Video Game Machine Array
 SET-UP
1. Inspect the exterior of the main cabinet and the seat pedestal for signs of damage prior to assembly.
WARNING
The cabinet is top heavy. Do not push against plastic parts during movement.
2.  Remove the keys from the steering wheel.  Unlock the coin, cash box, and rear doors to access the
electrical cords, mechanical components, and spare parts packed inside the cash box.
3.  Install one nut onto each leg leveler. Tilting as needed, locate the threaded...

Operations - 6
Location of Casters and Levelers
5. Reach inside the base of the cabinet and remove the bolts used to fasten a mounting rail to the
cabinet and set aside. Individually pull the rail out, flip it end for end, and reinsert it. Fasten the rail to
the inside of the cabinet with bolts until finger tight; some movement is required in the mounting rails
to align holes with pedestal assembly.
 Repeat for the mounting rail on the other side. See diagram for
proper placement.
Location of Pedestal...

Operations - 7 6.  Roll the pedestal near the cabinet and align the opening in the pedestal with the ends of the rails.
Slide the pedestal forward onto the rails leaving enough space to attach the wiring harness. Mate
each cable connector and press firmly to seat the contacts.  Ensure no wires are pinched during
pedestal attachment. Fasten in place with the ¼ -20 tamper resistant screws and large flat washers
provided in spare parts. Tighten the screws firmly with the wrench provided, and then tighten...

Operations - 8 12.  Plug the VGM into a grounded (3-terminal) AC wall outlet.  Press the ON/OFF switch located near the
top of the cabinet to switch on power to the game cabinet. After the Self-Test Mode the game
automatically enters Attract Mode if no errors are found.
13.  Open the coin door.  Locate the operator control switch panel and then press and hold the Begin Test
button to enter the menu system.  W ait until the Main Menu screen appears on the monitor.
Coin Door Switch Location
14. Follow...

Operations - 9
MAINTENANCE
♦
 Viewing Glass
It is not necessary to switch off power to the VGM to clean the glass.  Apply a mild glass cleaner to a
clean cloth or sponge and wipe the viewing glass. 
 Do not apply the cleaner directly on the glass!
Liquid could drip down into switch or control circuits and cause erratic game operation.
♦
 Player Controls
Use plastic-safe, non-abrasive cleaners to avoid damage.  Apply cleaner to a clean cloth or sponge
and wipe the player controls.  Do not apply the...

Operations - 10 GAME RULES AND OBJECTIVES
The game is configured for one-player game play, but up to four cabinets may be linked at one time to
promote multiple player competition. To enter Game Mode, individual player(s) must insert the required
amount of currency or tokens, press the Start button, and select a car and track. The main objective of the
game is to earn top ranking against other drivers.
PLAYER CONTROLS
♦
 Start button
The start button is used to begin game play or to select certain...

Operations - 11
GAME OPERATION
Access to the menu system for statistics, adjustments, and testing is secured by a keyed lock to prevent
tampering.  W hen the menu system is entered, on screen messages guide the operator through tasks.
Cabinet Switches
♦
 The ON/OFF SWITCH 
is located on the top side of the cabinet.
♦
 The REMOTE MONITOR ADJUSTMENTS 
are located inside the coin vault.  Adjust video image size,
brightness, contrast, etc. using the Monitor Test screens and the monitor controls.
♦
 The SLAM...

Operations - 12
NOTES 

	




	




 

Diagnostics - 2
MENU SYSTEM
WHAT IS THE MENU SYSTEM?
The game’s Menu System is a series of auditing, game adjustments and diagnostic screens. You can
easily access and apply these screens to optimize game performance. For instance…
¾  Use game audit screens to assess game performance.
¾  Use adjustment screens to help you customize game performance. For example, you can restore
factory default game settings. You can also calibrate player controls for player accuracy.
¾  Use diagnostic screens to verify...