Marantz Vp10s1 DLP Projector User Manual
Here you can view all the pages of manual Marantz Vp10s1 DLP Projector User Manual. The Marantz manuals for Projector are available online for free. You can easily download all the documents as PDF.
Page 11
7 ENGLISH Rear and Terminals RS-232C DVI-D IN RGB INEXT. INT.IN OUTOFF ON1 2 TRIG. LIGHTREMOTE VIDEO INS-VIDEO IN COMPONENT VIDEO IN 1 COMPONENT VIDEO IN 2 YPB/CBPR/CRYPB/CBPR/CR 1 1198610 11 12 5 23410 107 ❖Terminals zVIDEO IN jack Connect to the video (composite) output of a video device. xS-VIDEO IN jack Connect to the S-video output of a video device. cCOMPONENT VIDEO IN 1 & 2 jacks Jacks 1 and 2 have each Y, PB /CBand PR /CRjacks. Connect to the component video output of a video device, AV...
Page 12
8 ENGLISH Remote Controller aSTANDBY button (pg. 20) Sets the projector on standby provided power to the projector is on. sMENU button (pg. 25) Displays the on-screen menu (*OSD). * OSD: Acronym for On Screen Display. With this projector, OSD entails menus for making adjustments and settings. d3/4/1/2/ ENTER button Press the cursor buttons (3[UP], 4[DOWN], 1[LEFT], 2[RIGHT]) to select menu items. Press the button at its center to enter the selected item. fINPUT button (pg. 21) Selects the Input...
Page 13
9 ENGLISH ™3CINEMA button Pressing the button one time displays the currently selected cinema mode. Pressing the button after that switches the 2-3 pull-down feature between Auto/Off. ™4USER button (pg. 25) Selects the user mode. The user mode is for enjoying images at a user-selected gamma curve. Every time the button is pressed, the selection rotates in the order of User 1 ➔User 2 ➔User 3. ™5DYNA. button (pg. 25) Selects the dynamic mode. The dynamic mode is for enjoying visually dynamic images....
Page 14
10 ENGLISH Note : •Before installing the projector, carefully read “Precautions in Use” ( pg. 2) in this User Guide. •Specialized skill is required to hang this projector from a ceiling. For safety reasons, do not install the projector yourself. Contact your nearest Marantz Authorized Dealer or Service Center. Hanging the projector from the ceiling requires a separately solder hanger and pole. •Do not look through the lens with power to the projector on. Exposure to the lamp can harm eyes. ❖When...
Page 15
11 ENGLISH The projection distance for projecting a 16:9 image on a 16:9 screen is shown below. Note: When installing the projector, allow for ±5% tolerance in the above projection distances. ❖How to calculate projection distance •When using the LN10VP32 lens Min. projection distance (inch) = Diagonal (inch) x 1.255 Max. projection distance (inch) = Diagonal (inch) x 1.5688 •When using the LN10VP40 lens Min. projection distance (inch) = Diagonal (inch) x 1.5688 Max. projection distance (inch) = Diagonal...
Page 16
12 ENGLISHThe projection distance for projecting a 16:9 image on a 16:9 screen is shown below. Note: When installing the projector, allow for ±5% tolerance in the above projection distances. ❖How to calculate projection distance •When using the LN10VP32 lens Min. projection distance (m) = Diagonal (inch) x 3.188/100 Max. projection distance (m) = Diagonal (inch) x 3.985/100 •When using the LN10VP40 lens Min. projection distance (m) = Diagonal (inch) x 3.985/100 Max. projection distance (m) = Diagonal...
Page 17
13 ENGLISH The projection distance for projecting a 16:9 image on a 4:3 screen is shown below. Note: When installing the projector, allow for ±5% tolerance in the above projection distances. ❖How to calculate projection distance •When using the LN10VP32 lens Min. projection distance (inch) = Diagonal (inch) x 1.1520 Max. projection distance (inch) = Diagonal (inch) x 1.4400 •When using the LN10VP40 lens Min. projection distance (inch) = Diagonal (inch) x 1.4400 Max. projection distance (inch) = Diagonal...
Page 18
The projection distance for projecting a 16:9 image on a 4:3 screen is shown below. Note: When installing the projector, allow for ±5% tolerance in the above projection distances. ❖How to calculate projection distance •When using the LN10VP32 lens Min. projection distance (m) = Diagonal (inch) x 2.927/100 Max. projection distance (m) = Diagonal (inch) x 3.658/100 •When using the LN10VP40 lens Min. projection distance (m) = Diagonal (inch) x 3.658/100 Max. projection distance (m) = Diagonal (inch) x...
Page 19
15 ENGLISH ❖When making connections be sure to: •Turn off the projector and any connected equipment before making any connections. •Use the proper cables for each connection. See the instruction manual of each connected device. •Securely insert the plug into the jack to connect cables. Loose connections can lead to trouble. ❖When disconnecting cables: •Grab the plug and not the cable itself. Pulling on the cable can damage the cable and cause incomplete connections later on. Connect the included AC power...
Page 20
16 ENGLISHYou can connect this projector to an HD-Video or PC using the RGB IN jack as well as to a satellite, cable tuner or PC using the DVI-D input jack. 1.Connect one end of an RGB cable (or DVI-D cable) to the RGB IN jack (or DVI-D IN jack) on the projector rear. 2.Connect the other end of the cable to the RGB output jack of the HD-Video or PC (or the DVI-D output jack of the satellite, cable tuner or PC). Note :To project images from a device connected to the DVI-D jack, do as follows. The images...