Marantz Vp10s1 DLP Projector User Manual

Model  VP-10S1 User Guide
DLP
TMProjector 

i
The lightning flash with arrowhead symbol
within an equilateral triangle is intended to alert
the user to the presence of uninsulated
“dangerous voltage” within the product’s
enclosure that may be of sufficient magnitude
to constitute a risk of electric shock to persons.
The exclamation point within an equilateral
triangle is intended to alert the user to the
presence of important operating and
maintenance (servicing) instructions in the
literature accompanying the product.
CAUTION
RISK OF ELECTRIC...

ii
IMPORTANT SAFETY
INSTRUCTIONS
READ BEFORE OPERATING EQUIPMENT
This product was designed and manufactured to meet strict quality and safety standards. There are, however, some installation and operation
precautions which you should be particularly aware of.
1. Read these instructions - All the safety and operating instructions should be read before the product is operated.
2. Keep these instructions - The safety and operating instructions should be kept for future reference.
3. Heed all warnings - All...

iii Lamp Handling Precautions
DANGERThe P-VIP lamp is a high voltage glass mercury vapor lamp. The
lamp can break or fail to light if handled wrongly during replacement
or because of temperature in the room where the projector is being
used or stored. 
Lamp life also varies according to the lamp with some even breaking or
burning out as soon as they are used the first time. If the lamp breaks,
glass fragments may be scattered inside the lamp unit and projector,
and mercury gas from the bulb may seep from...

1
ENGLISH
TABLE OF CONTENTS
PRECAUTIONS IN USE ............................................................................................................2
Precautions in Relocation......................................................................................................................2
Precautions in Installation .....................................................................................................................2
Precautions in Operation...

2
ENGLISH
• Hold the projector by the grooves in the bottom when
relocating. Work in group of 4 or more to carry the projector.
• Ensure sufficient space around the projector when
relocating the unit. Do not carry the projector through narrow
places, up/down stairs or anywhere that poses danger.
• Never drag or roll the projector when relocating the unit.
• Unplug the AC power cable and disconnect any other
cables from the projector before relocating the unit.
• If the projector is hung from a ceiling or...

3
ENGLISH
• Replacing the lamp runs the risk of burns and electric
shock, therefore shut off power supply, unplug the AC
power cable from its electrical outlet and wait at least 60 min
for the lamp to cool down before attempting to replace it.
• If the lamp breaks, contact your nearest Marantz Authorized
Dealer or Service Center.
• Before replacing the lamp, read carefully “Lamp Handling
Precautions” (
pg. iii) and “Lamp Unit Replacement”
(
pg. 36). Replace the lamp as explained therein.• The lens of...

4
ENGLISH
- High Picture Quality Technology -
❖DLPTMtechnology to deliver a high
contrast ratio (3600:1)
•Incorporates three HD2 DMDTMelements (1280 x 720
pixel, 16:9 wide panel) to distinctly reproduce R/G/B
colors. Using an optimized system for movie viewing with
the below image circuit and optical parts, the VP-10S1
brings high color reproduction and rich tones that balance
pitch black with bright white to images.
❖Built-in image processing IC by Faroudja
to project high quality video images
•Images...

5
ENGLISH• Lens cap x 1
• Remote controller x 1
• AA batteries x 2
• Color temperature sensor x 1• Attachment for Color temperature sensor x 1
• AC power cable x 1
• Control adapter cable (RCA miniature jack) x 1
• User Guide x 1
• Warranty Card (1 copy each for USA, CANADA)
R
COMP.1
PAT T.
INPUTASPECT
MENUV-MUTE
COMP.2
S-VIDEO
VIDEO
RGB
AUX
REMOTE CONTROLLER
RC-12VPS3
INPUT1
ENTER PATTERN STANDBY POWER ON
THEATER
STD
DYNA.
USER
CINEMA
MODEFULL
NORMAL
ZOOM
THROUGH
INFO
ASPECT
LIGHT
After opening the...

6
ENGLISH
Front and Top
MENUINPUTPATTERN
ENTERPOWER STANDBY ONWARNINGWARNINGWARNINGWARNINGWARNINGWARNING
7
8
12
3
94
10
6
5
qPOWER button (pg. 20)
Switches power ON/OFF (standby).
wMENU button (pg. 25)
Displays the on-screen menu (*OSD).
* OSD: Acronym for On Screen Display. With this projector,
OSD entails menus for making adjustments and
settings.
eINPUT button (pg. 21)
Selects the Input signal. 
Pressing the button one time displays the currently selected
Input signal. Every time the button is...