Marantz Pd4201 User Guide

22
*1 Only when AUTO PICTURE is OFF.
*2 PC/RGB only
*3“LOW TONE” is only for 50 inch type.
Main menu Sub menu Sub menu 2 Sub menu 3 Sub menu 4 RESETREFERENCE
FUNCTION ADVANCED OSM ON←→OFFYES 30
POWER MGT. ON←→OFFYES 30
INPUT SKIP ON←→OFFYES 31
SUB. PICTURE SUB. P DETECT OFF←→AUTO YES 31
DISPLAY FADE←→NORMAL YES 31
SUB. P RATE 20%←…
→100% YES 31
ZOOM NAV OFF←→S BY S←→BTM LEFT←→BTM RIGHT←→TOP RIGHT←→TOP LEFT YES 31
PICTURE FREEZE OFF←→S BY S1←→S BY S2←→BTM LEFT←→BTM RIGHT←→TOP RIGHT←→TOP LEFT YES 31
PDP...

23
Picture Settings Menu
Storing picture settings
This function allows you to store in memory the current
input signal and PICTURE menu settings and to recall
these settings when necessary.
There are six picture memories, and notes of up to 15
characters can be added to each.
Example: Storing picture settings at MEMORY1
On “PICTURE MEMORY” of “PICTURE” menu, select
“MEMORY1”, then press the MENU/ENTER button.
The “PICTURE MEMORY” screen appears.
SEL.
PICTURE MEMORY
1 / 2MEMORY1              SET...

24
Setting the color temperature
Use this procedure to set color tone produced by the plasma
display.
Example: Setting “HIGH”
On “COLOR TEMP.” of “PICTURE” menu, select “HIGH”.
SEL. ADJ. RETURN
PICTURE
PICTURE MEMORY
CONTRAST
BRIGHTNESS
SHARPNESS
COLOR
TINT
NR
COLOR TEMP.
CINEMA MODE
PICTURE MODE
GAMMA
LOW TONE
SET UP LEVEL
COLOR TUNE:   OFF
:   OFF
:   HIGH
:   ON
:   NORMAL
:   2.2
:   MODE1
:   0%: 52
: 32
: 16
: 32
: 32
G R
EXIT
Information
 Setting the color temperature
LOW: More red
MIDDLE LOW:...

25
Adjusting the colors
Use this procedure to adjust hue and color density for red,
green, blue, yellow, magenta and cyan without changing
the white point.
You can accentuate the green color of trees, the blue of
the sky, etc.
Example: Adjusting the color tune for blue
Set “ADVANCED OSM” to “ON” in the FUNCTION menu.
On “PICTURE” menu, select “COLOR TUNE”, then press
the MENU/ENTER button.
The “COLOR TUNE” screen appears.
On “BLUE” of “COLOR TUNE”, adjust the color tune.
SEL. ADJ. RETURN
COLOR TUNE
RED...

26
Audio Settings Menu
Adjusting the treble, bass and left/right
balance and audio input select
The treble, bass and left/right balance can be adjusted to
suit your tastes.
Example: Adjusting the bass
On “BASS” of “AUDIO” menu, adjust the bass.
SEL. ADJ. RETURNEXIT
AUDIO
BASS
TREBLE
BALANCE
AUDIO INPUT1
AUDIO INPUT2
AUDIO INPUT3
DVD/HD3 INPUT 
DVD/HD4 INPUT:   VIDEO1
:   DVD/HD1
:   PC/RGB 
:   HDMI
:   HDMI: 23
: 13
:   0
R L
Note : If “CAN NOT ADJUST” appears...
Set “AUDIO INPUT” on the AUDIO menu...

27
SET UP Settings Menu
Setting the language for the menus
The menu display can be set to one of eight languages.
Example: Setting the menu display to “DEUTSCH”
On “LANGUAGE” of “SET UP” menu, select “DEUTSCH”.
SEL. ADJ. RETURN
SET UP
LANGUAGE
DVD/HD1 INPUT
D-SUB INPUT
HD SELECT
RGB SELECT
HDMI SET UP
COLOR SYSTEM
BACK GROUND
GRAY LEVEL
S1/S2
DISPLAY OSM
OSM ADJ.
REMOTE ID 
ALL RESET:   DEUTSCH
:   COMPONENT
:   RGB
:   1080I
:   AUTO
:   HIGH
:   AUTO
:   GRAY
:   3
:   OFF
:   ON
:   TOP LEFT
:   ALL...

28
Information

 RGB SELECT modes
AU TO : Select the suitable mode for the specifications
of input signals as listed in the table “Computer input
signals supported by this system” on page 39, 42 and
45.
The others: The available resolutions are shown.
See page 39, 42 and 45 for the details of the above
settings.
Setting the black level for HDMI signal
Set the black level.
Example: Setting the “HDMI SET UP” mode to “LOW”
Set “ADVANCED OSM” to “ON” in the FUNCTION menu.
On “HDMI SET UP” of “SET UP” menu,...

29
etting the screen size for S1/S2 video input
f the S-video signal contains screen size information, the 
mage will be automatically adjusted to fit the screen when 
his S1/S2 is set to AUTO.
his feature is available only when an S-video signal is 
nput via the VIDEO2 terminal.
xample: Setting “S1/S2” to “AUTO”
et “ADVANCED OSM” to “ON” in the FUNCTION menu.
n “S1/S2” of “SET UP” menu, select “AUTO”. 
nformation
 S1/S2 settings
UTO:  Adjusts the screen size automatically according 
o the S1/S2 video...

30
Resetting to the default values
Use these operations to restore all the settings (PICTURE,
AUDIO, IMAGE  ADJUST, SET UP, etc.) to the factory
default values.
Refer to page 21 for items to be reset.
On “ALL RESET” of “SET UP” menu, select “ON”, then
press the MENU/ENTER button.
SEL. ADJ. RETURN
SET UP
LANGUAGE
DVD/HD1 INPUT
D-SUB INPUT
HD SELECT
RGB SELECT
HDMI SET UP
COLOR SYSTEM
BACK GROUND
GRAY LEVEL
S1/S2
DISPLAY OSM
OSM ADJ.
REMOTE ID 
ALL RESET:   ENGLISH
:   COMPONENT
:   RGB
:   1080I
:   AUTO...

31
Setting the Input Skip
When this is ON, signals which are not present will be
skipped over and only pictures whose signals are being
transmitted will be displayed.
This setting is valid only for the INPUT/EXIT button on
the unit.
Example: Set to “ON”
Set “ADVANCED OSM” to “ON” in the FUNCTION menu.
On “INPUT SKIP” of “FUNCTION” menu, select “ON”.
SEL. ADJ. RETURNEXIT
FUNCTION
ADVANCED OSM
POWER MGT.
INPUT SKIP
SUB. PICTURE
ZOOM NAV
PICTURE FREEZE
PDP SAVER 
CLOSED CAPTION 
CAPTION CONT 
PWR. ON MODE:...