Lucent Technologies DEFINITY Enterprise Communications Server, System 75, System 85 Instructions Manual

DEFINITY Enterprise Communications Server and System 75 and System 85
Terminals and Adjuncts Reference
555-015-201Issue 11
December 1999
CALLMASTER Voice Terminals
13-11
13
the top feature button on the CALLMASTER VI, has a green status light
associated with it. These buttons can be used for features assigned during
administration.
NOTE:
The CALLMASTER V does not have any Feature-Only buttons.
Listen-Only SPEAKER
Only the CALLMASTER V has a one-way, listen-only speaker. If the user wishes
to speak to the...

DEFINITY Enterprise Communications Server and System 75 and System 85
Terminals and Adjuncts Reference
555-015-201Issue 11
December 1999
CALLMASTER Voice Terminals
13-12
13
When the user sets the volume for the headset or handset or for the tone ringer on
the CALLMASTER II and III, IV, or on the CALLMASTER V, the display on the
voice terminal shows a “bar array” that indicates the volume setting.
LOG IN and RELEASE buttons
On the CALLMASTER II, CALLMASTER III, and CALLMASTER IV, the LOG IN
and RELEASE...

DEFINITY Enterprise Communications Server and System 75 and System 85
Terminals and Adjuncts Reference
555-015-201Issue 11
December 1999
CALLMASTER Voice Terminals
13-13
13
CALLMASTER is administered as a 7405D with a D401 display, as a 7406D,
or as any other set with a 1-line display format. The default is the
2-line display. To change this setting, see the
DEFINITY ECS
CALLMASTER II, CALLMASTER III, and CALLMASTER IV Voice Terminals
Instructions for Programming the Options,
555-015-172.
Other Physical...

DEFINITY Enterprise Communications Server and System 75 and System 85
Terminals and Adjuncts Reference
555-015-201Issue 11
December 1999
CALLMASTER Voice Terminals
13-14
13
Cords
A D8W-87 line cord and a Handset cord are provided with all CALLMASTER voice
terminals. An EIA/TIA Data cord is also shipped in the box with the CALLMASTER
VI set.
Kneewell Adapter (602 CALLMASTER only)
An optional adapter is available for connecting two headsets or handsets to the
602 CALLMASTER. This adapter allows the handset...

DEFINITY Enterprise Communications Server and System 75 and System 85
Terminals and Adjuncts Reference
555-015-201Issue 11
December 1999
CALLMASTER Voice Terminals
13-15
13
Wiring Information on the CALLMASTER IV
The CALLMASTER IV voice terminal works in both 4-wire and 2-wire DCP
configurations. The table on the next page shows pin assignments for the line cord
and jack block interface
*U-T=“Tip”
U-R = “Ring”
Table 13-1. The DCP Line Interface for the CALLMASTER IV
CONNECTOR BLOCK DCP JACK INTERFACE...

DEFINITY Enterprise Communications Server and System 75 and System 85
Terminals and Adjuncts Reference
555-015-201Issue 11
December 1999
CALLMASTER Voice Terminals
13-16
13
The design of this product allows it to operate on either 2-wire or 4-wire DCP circuits. In
order for the terminal to function properly in either 2-wire or 4-wire installations, there
must be NO INTERCONNECTIONS between the wire pairs used for 2-wire and 4-wire
operation. Bridging or paralleling of these pairs can result in damage to...

DEFINITY Enterprise Communications Server and System 75 and System 85
Terminals and Adjuncts Reference
555-015-201Issue 11
December 1999
CALLMASTER Voice Terminals
13-17
13
Notes:
These ranges can be extended to 5,000 feet (1524 m) for 24 AWG wire and 4,000 feet
(1219 m) for 26 AWG wire with the use of a Data Link Protector. Refer to
EXPOSED PORT
PROTECTION
.
In 2-wire installations, the CALLMASTER III and CALLMASTER IV can be connected to a
TN2181 port board.
Distance Limitations for the CALLMASTER V...

DEFINITY Enterprise Communications Server and System 75 and System 85
Terminals and Adjuncts Reference
555-015-201Issue 11
December 1999
CALLMASTER Voice Terminals
13-18
13
The CALLMASTER II, CALLMASTER III, and CALLMASTER IV can be used only
with a DEFINITY ECS G3V3 and above. The CALLMASTER II and
CALLMASTER III must be aliased as a 602 CALLMASTER. The
CALLMASTER IV voice terminal can be administered as itself.
The CALLMASTER V and CALLMASTER VI can be used only with a DEFINITY
ECS Release 6.1 and...

DEFINITY Enterprise Communications Server and System 75 and System 85
Terminals and Adjuncts Reference
555-015-201Issue 11
December 1999
CALLMASTER Voice Terminals
13-19
13
Figure 13-6. Button Numbering for Administering the 602 CALLMASTER
Voice Terminal Connected to a System 75, a DEFINITY G1 or G3,
or a DEFINITY ECS
Drop
12 3
45 6
78 9ABC DEF
MNO JKL GHI
PRS
TUVWXY
*O# Oper
Co nfere nce
Trans fe r
Hold
Mute
Me ssa ge
Re lea se
5
* Feature Button #6 is preassigned as a Mute Button. It is recommended...

DEFINITY Enterprise Communications Server and System 75 and System 85
Terminals and Adjuncts Reference
555-015-201Issue 11
December 1999
CALLMASTER Voice Terminals
13-20
13
Figure 13-7. Button Numbering for Administering the 602 CALLMASTER
Voice Terminal Connected to a System 85 or a DEFINITY G2
Drop
123
456
789ABC DEF
MNO JKL GHI
PRS
TUVWXY
*O# Oper
Conference
Transfe r
Hold
Mute
Messa ge
8
NOTE: The Hold Button is Button #1.Feature Button
Assignments Button
Assignments
3-12
13-30
12
7
11
6
10
5
9
3
8...