Lucent Technologies DEFINITY Enterprise Communications Server, System 75, System 85 Instructions Manual

DEFINITY Enterprise Communications Server and System 75 and System 85
Terminals and Adjuncts Reference
555-015-201Issue 11
December 1999
The 6400 Series Telephones
7-27 The 6416D+ and 6416D+M Telephones
7
Applications for the Modular 6416D+M 
Telephone Only
If the Modular 6416D+M telephone is being used with a DEFINITY switch, the
manner in which the telephone and the analog adjunct interact depends on the
switch release to which your telephone is connected. (Your system manager can
give you more...

DEFINITY Enterprise Communications Server and System 75 and System 85
Terminals and Adjuncts Reference
555-015-201Issue 11
December 1999
The 6400 Series Telephones
7-28 The 6416D+ and 6416D+M Telephones
7
Speaker (Listen-Only) Feature
The 6416D+ and 6416D+M telephones have a two-way speaker phone; however,
the telephones can also be optioned instead for a 1-way, listen-only speaker. If
this is the case, use the SPEAKER button on the front of the telephone for turning
on and off the speaker.
The Speaker...

DEFINITY Enterprise Communications Server and System 75 and System 85
Terminals and Adjuncts Reference
555-015-201Issue 11
December 1999
The 6400 Series Telephones
7-29 The 6416D+ and 6416D+M Telephones
7
Call Appearance/Feature Buttons
The 6416D+ and 6416D+M telephones have 16 call appearance/feature buttons,
each equipped with a red and a green light. Usually, at least two of these buttons
are administered as call appearances for the telephone ’s primary extension
number, where calls are placed and...

DEFINITY Enterprise Communications Server and System 75 and System 85
Terminals and Adjuncts Reference
555-015-201Issue 11
December 1999
The 6400 Series Telephones
7-30 The 6416D+ and 6416D+M Telephones
7
Below is a list of the 12 default softkey features assigned to the 6416D+ and
6416D+M telephones and the order in which they appear.
On 6416D+ and 6416D+M telephones connected to a DEFINITY ECS
Release 6.1 or later, the system manager can choose to administer alternate
features for use with the...

DEFINITY Enterprise Communications Server and System 75 and System 85
Terminals and Adjuncts Reference
555-015-201Issue 11
December 1999
The 6400 Series Telephones
7-31 The 6416D+ and 6416D+M Telephones
7
Table 7-6. Alternate Softkey Features on the 6416D+ and 6416D+M Connected 
to a DEFINITY ECS Release 6.1 and Later
Abbreviation Feature
AcctAccount Code Entry
ADAbbreviated Dialing buttons (can be multiple AD buttons)
CFrwdCall Forwarding All Calls
CParkCall Park
CPkUpCall Pickup
CnLWCCancel Leave Word...

DEFINITY Enterprise Communications Server and System 75 and System 85
Terminals and Adjuncts Reference
555-015-201Issue 11
December 1999
The 6400 Series Telephones
7-32 The 6416D+ and 6416D+M Telephones
7
Other Physical Features
Pull-out tray
Five quick reference cards are provided in the tray located under the base of every
6400 Series telephone.
Handset
The 6416D+ and 6416D+M telephones are equipped with an AJ2A handset which
can accept either a handset or a headset.
Dial pad
The 6416D+ and 6416D+M...

DEFINITY Enterprise Communications Server and System 75 and System 85
Terminals and Adjuncts Reference
555-015-201Issue 11
December 1999
The 6400 Series Telephones
7-33 The 6416D+ and 6416D+M Telephones
7
Ringing
The 6416D+ and 6416D+M telephones have electronic tone ringing with eight
possible ringing patterns which you can select by pressing the CONF button while
on-hook. The loudness of the tone ringer can be controlled by the VOLUME
“arrow” button. (The user must NOT be on a speakerphone call. If the...

DEFINITY Enterprise Communications Server and System 75 and System 85
Terminals and Adjuncts Reference
555-015-201Issue 11
December 1999
The 6400 Series Telephones
7-34 The 6416D+ and 6416D+M Telephones
7
A D8W modular cord MUST be used for all 2-wire installations requiring auxiliary
power. If using an auxiliary power supply such as a Lucent Technologies 1151A, it
is acceptable to have a D2R cord connected from the wall jack to the LINE jack
found on the power supply.
For 2-wire operation, if you need...

DEFINITY Enterprise Communications Server and System 75 and System 85
Terminals and Adjuncts Reference
555-015-201Issue 11
December 1999
The 6400 Series Telephones
7-35 The 6416D+ and 6416D+M Telephones
7
Administration
The 6416D+ and 6416D+M telephones can be administered as themselves on a
DEFINITY system starting with Release 6.1 software. These telephones will NOT
work with any DEFINITY switch release prior to Release 6.1.
Button Numbering
The following button diagrams of the 6416D+ and 6416D+M...

DEFINITY Enterprise Communications Server and System 75 and System 85
Terminals and Adjuncts Reference
555-015-201Issue 11
December 1999
The 6400 Series Telephones
7-36 The 6416D+ and 6416D+M Telephones
7
Administering the Analog Adjunct on the 
Modular 6416D+M Telephone
As noted above, all 6416D+ and 6416D+M can be administered as themselves
ONLY IF they are connected to a DEFINITY ECS Release 6.1 (or later). In Native
Mode the Modular 6416D+M telephone is administered through a digital line
circuit...