Lucent Technologies DEFINITY Enterprise Communications Server, System 75, System 85 Instructions Manual

DEFINITY Enterprise Communications Server and System 75 and System 85
Terminals and Adjuncts Reference
555-015-201Issue 11
December 1999
The 6400 Series Telephones
7-47 The 6424D+ and 6424D+M Telephone
7
Ringing
The 6424D+ and 6424D+M telephones have electronic tone ringing with eight
possible ringing patterns which you can select by pressing the CONF button while
on-hook. The loudness of the tone ringer can be controlled by the VOLUME
“arrow” button. (The user must NOT be on a speakerphone call. If the...

DEFINITY Enterprise Communications Server and System 75 and System 85
Terminals and Adjuncts Reference
555-015-201Issue 11
December 1999
The 6400 Series Telephones
7-48 The 6424D+ and 6424D+M Telephone
7
is acceptable to have a D2R cord connected from the wall jack to the LINE jack
found on the power supply.
For 2-wire operation, if you need to plug the telephone into a 4-pin or 6-pin wall
jack, instead of a standard 8-pin modular jack, refer to the “Line Interface” table
above to insure that the wires...

DEFINITY Enterprise Communications Server and System 75 and System 85
Terminals and Adjuncts Reference
555-015-201Issue 11
December 1999
The 6400 Series Telephones
7-49 The 6424D+ and 6424D+M Telephone
7
Button Numbering
The following button diagrams of the 6424D+ and 6424D+M telephones will help
you administer the 6424D+ and 6424D+M telephone connected to a DEFINITY
system Release 6.1 or later.
If you need more information, refer to
DEFINITY Communications System
Generic 3 Implementation
, 555-230-653....

DEFINITY Enterprise Communications Server and System 75 and System 85
Terminals and Adjuncts Reference
555-015-201Issue 11
December 1999
The 6400 Series Telephones
7-50 The 6424D+ and 6424D+M Telephone
7
Administering the Analog Adjunct on the 
Modular 6424D+M Telephone
As noted above, all 6424D+ and 6424D+M telephones can be administered as
themselves ONLY IF they are connected to a DEFINITY ECS Release 6.1 (or
later). In Native Mode the Modular 6424D+M telephone is administered through a
digital line...

DEFINITY Enterprise Communications Server and System 75 and System 85
Terminals and Adjuncts Reference
555-015-201Issue 11
December 1999
The 6400 Series Telephones
7-51 The 6424D+ and 6424D+M Telephone
7
6424D+ and 6424D+M Equipment PECs and 
Comcodes
The 6424D+ and 6424D+M telephones and components can be ordered with
these PECs and Comcodes:
n6424D+ (6424D01A) telephone
Gray 6424D+ Set PEC: 3307-24G
Comcode: 108020553;
White 6424D+ Set PEC: 3307-24W
Comcode: 108020454
nModular Class B 6424D+M...

DEFINITY Enterprise Communications Server and System 75 and System 85
Terminals and Adjuncts Reference
555-015-201Issue 11
December 1999
The 6400 Series Telephones
7-52 The 6424D+ and 6424D+M Telephone
7
nXM24 Expansion Module(for the non-modular 6416D+ and 6424D+)
Gray XM24 = PEC: 33076/A, Comcode: 108023243
White XM24 = PEC: 33074/A, Comcode: 108023235
nXM24 Expansion Module(with a new base angle for the 6416D+M,
6424D+M, and CALLMASTER V)
Gray XM24 = PEC: 33071/A, Comcode: 108544511
White XM24 = PEC:...

The 7100 Series Voice Terminals
8-1
8
DEFINITY Enterprise Communications Server and System 75 and System 85
Terminals and Adjuncts Reference
555-015-201Issue 11
December 1999
8
The 7100 Series Voice Terminals
The following section describes these 7100 Series voice terminals:
n7101A voice terminal
n7102A and 7102 Plus voice terminals
n7103A Fixed Feature voice terminal
n7103A Programmable voice terminal
n7104A voice terminal 

DEFINITY Enterprise Communications Server and System 75 and System 85
Terminals and Adjuncts Reference
555-015-201Issue 11
December 1999
The 7100 Series Voice Terminals
8-2 The 7101A Voice Terminal
8
The 7101A Voice Terminal
Figure 8-1. The 7101A Voice Terminal
The 7101A voice terminal is a single-line analog model that requires one tip and
ring pair for operation. It is equipped with a Message Waiting light and a RECALL
button for activating the system’s special features. It cannot be physically...

DEFINITY Enterprise Communications Server and System 75 and System 85
Terminals and Adjuncts Reference
555-015-201Issue 11
December 1999
The 7100 Series Voice Terminals
8-3 The 7101A Voice Terminal
8
Applications
The 7101A terminal can be used with the DEFINITY Communications System
Generic 1, Generic 2, and Generic 3, the DEFINITY ECS, System 75, and
System 85. This voice terminal is especially suitable for manufacturing,
warehousing, guard and/or reception areas, or office desks where multiple line...

DEFINITY Enterprise Communications Server and System 75 and System 85
Terminals and Adjuncts Reference
555-015-201Issue 11
December 1999
The 7100 Series Voice Terminals
8-4 The 7101A Voice Terminal
8
Jacks
The 7101A housing contains two jacks. The handset cord jack is just under the left
front edge of the housing. (The handset contains a jack for the other end of the
handset cord.) The line jack is on the bottom center of the housing.
Cords
Two cords are supplied with the 7101A terminal: a coiled 7-foot...