Home > Lucent Technologies > Communications System > Lucent Technologies DEFINITY Enterprise Communications Server Release 8.2 System Description Manual

Lucent Technologies DEFINITY Enterprise Communications Server Release 8.2 System Description Manual

Here you can view all the pages of manual Lucent Technologies DEFINITY Enterprise Communications Server Release 8.2 System Description Manual. The Lucent Technologies manuals for Communications System are available online for free. You can easily download all the documents as PDF.

Page 211

DEFINITY Enterprise Communications Server Release 8.2
System Description  555-233-200  Issue 1
April 2000
Technical Specifications 
201 Additional Hardware to Use Features 
Automatic call 
distribution 
(ACD) Does not 
require added 
hardware.If needed: 1 port on an analog line circuit pack per auxiliary queue 
warning level lamp. Hardware to support recorded announcement or 
music-on-hold. See Recorded announcement and music-on-hold. 
Voice terminals (not 2500-type sets) are required for agents. If CMS...

Page 212

Technical Specifications 
202 Additional Hardware to Use Features 
DEFINITY Enterprise Communications Server Release 8.2
System Description  555-233-200  Issue 1
April 2000
Bridged call 
appearance — 
multi-appear-
ance voice termi-
nalMulti-appearance voice terminal with available 2 light (red and 
green) buttons. A Call Coverage module or expansion module can 
provide up to 20 bridged call appearances.
Bridged call 
appearance — 
single-line voice 
terminalMulti-button set with available 2 light (red...

Page 213

DEFINITY Enterprise Communications Server Release 8.2
System Description  555-233-200  Issue 1
April 2000
Technical Specifications 
203 Additional Hardware to Use Features 
Call detail 
recording (CDR)All except R8r: a CDR output device can connect to the RS-232 port 
on the processor circuit pack to eliminate the need for data modules 
for the output devices below. 
R8r: a CDR output device connects to either: 
1. Packet data circuit pack cross-connected to a port on a digital 
line circuit pack...

Page 214

Technical Specifications 
204 Additional Hardware to Use Features 
DEFINITY Enterprise Communications Server Release 8.2
System Description  555-233-200  Issue 1
April 2000
Call manage-
ment system 
(CMS) (Cate-
gory A only)For R7 and later, all models, the ethernet port on the C-LAN board. 
For si models: port on a processor interface circuit pack and, 
depending on distance, an IDI or DSU. Alternatively, a port on a pro-
cessor interface is connected to a data module. The data module is 
connected to...

Page 215

DEFINITY Enterprise Communications Server Release 8.2
System Description  555-233-200  Issue 1
April 2000
Technical Specifications 
205 Additional Hardware to Use Features 
Call pickup 
(includes call 
pickup alerting)No additional hardware required.
Call waiting ter-
minationNo additional hardware required.
CAS (branch or 
main (Category A 
only))A tie trunk circuit pack for the release link trunk. Alternately, the PRI 
DS1 interface circuit pack can be used for the release link trunks of 
the CAS...

Page 216

Technical Specifications 
206 Additional Hardware to Use Features 
DEFINITY Enterprise Communications Server Release 8.2
System Description  555-233-200  Issue 1
April 2000
Constellation 
voice/ data termi-
nal supportA 6544 cluster controller is required to provide data connection to 
the host. One of the following adjunct voice terminals is required: 
7401D, 7406D, 602A1, or 603D1. The adjunct voice terminal can 
function as a stand-alone station even if the Constellation is pow-
ered down. 
Consult No...

Page 217

DEFINITY Enterprise Communications Server Release 8.2
System Description  555-233-200  Issue 1
April 2000
Technical Specifications 
207 Additional Hardware to Use Features 
Data call setup Each DCP data module requires 1 port on a digital line circuit pack. 
A data module shares the port with the associated voice terminal. 
Reused equipment: each personal terminal 510D or 515 BCT 
requires 1 port on a digital line circuit pack for shared use of voice 
and data. Each 7400, 7401D, 7404D, 7406D, 7407D or...

Page 218

Technical Specifications 
208 Additional Hardware to Use Features 
DEFINITY Enterprise Communications Server Release 8.2
System Description  555-233-200  Issue 1
April 2000
DCS features 
(All) (Category A 
only)r Model:
For releases before R7, a port on a PGATE (TN577) circuit pack and 
a data module or DSU are required. A tie trunk circuit pack or DS1 
circuit pack for the tie trunks between switches.
For R7 and later, the C-LAN (TN799) circuit pack is needed for IP 
connections.
si Model:
For releases...

Page 219

DEFINITY Enterprise Communications Server Release 8.2
System Description  555-233-200  Issue 1
April 2000
Technical Specifications 
209 Additional Hardware to Use Features 
DEFINITY wire-
less business 
system
DEFINITY forum 
personal commu-
nications man-
agerTN789 radio controller and DS1 interface circuit packs.
Demand print A message server adjunct (MSA) equipped with appropriate mes-
saging server software and associated printers.
Dial access to 
attendantNo additional hardware required.
Dial plan...

Page 220

Technical Specifications 
210 Additional Hardware to Use Features 
DEFINITY Enterprise Communications Server Release 8.2
System Description  555-233-200  Issue 1
April 2000
Distinctive ring-
ingNo additional hardware required.
Do not disturb If voice prompting is used, 1 or more ports on a voice synthesizer cir-
cuit pack.
DS1 integrated 
CSUDS1 interface circuit pack (TN767D or TN464E and later) and inte-
grated CSU module.
DS1 tie trunk ser-
viceOne DS1 interface circuit pack is required per 24...
Start reading Lucent Technologies DEFINITY Enterprise Communications Server Release 8.2 System Description Manual

Related Manuals for Lucent Technologies DEFINITY Enterprise Communications Server Release 8.2 System Description Manual

All Lucent Technologies manuals