Lucent Technologies DEFINITY Enterprise Communications Server Release 8.2 Administration For Network Connectivity Instructions Manual

QSIG 
391
Administration for Network Connectivity
555-233-504— Issue 1 — April 2000 CID: 77730
B  Private Networking
•Conference
If a user on a branch calls the attendant and conferences the attendant onto the 
call, the attendant’s display is not updated with “conference”. There is no QSIG 
standard defined for Conference and Definity has not implemented conference via 
MSI. 
•Centralized AUDIX
When a user zero’s out of AUDIX, if the host PBX is a QSIG-CAS branch, then 
the call is sent to the QSIG-CAS...

QSIG B  Private Networking
Administration for Network Connectivity
CID: 77730 555-233-504 — Issue 1 — April 2000
392
•Malicious Call Trace (MCT)
MCT is a feature that is performed on existing calls. MCT does not generate new 
attendant seeking calls. MCT will work in QSIG-CAS provided the attendants 
performing MCT-Activate, MCT-Control, and MCT-Deactivate are all on the 
same PBX. That is, an attendant on the main cannot work with an attendant on the 
branch to perform MCT.
•Multifrequency Signaling...

QSIG 
393
Administration for Network Connectivity
555-233-504— Issue 1 — April 2000 CID: 77730
B  Private Networking
•Extending a Call
QSIG CAS ensures that QSIG Path Replacement is attempted after split/swap,  
provided that all three parties (original calling party, the attendant, and the called 
party) are never conferenced together.  That is, if the attendant toggles between the 
other two parties for any number of times, never conferencing all three together, 
and then joins the two parties together...

QSIG B  Private Networking
Administration for Network Connectivity
CID: 77730 555-233-504 — Issue 1 — April 2000
394
•Timed reminder and Attendant timers
Attendant timers are:  
~Timed Reminder on Hold — starts when an attendant puts a call on hold.  
When this timer expires, the held call alerts the attendant. 
~Return Call Timeout — starts when a call is extended and then released from 
an attendant console.  If this timer expires, the call is returned to the attendant. 
~Time In Queue Warning —...

Centralized Voice Mail Via Mode Code 
395
Administration for Network Connectivity
555-233-504— Issue 1 — April 2000 CID: 77730
B  Private Networking
Centralized Voice Mail Via Mode Code
You can use a single voice mail system to support multiple DEFINITY and Merlin 
Legend/Magix systems in a network via mode code. This capability is available for:
•DEFINITY ECS R8
•Prologix R3
•BCS Issue 6
•Merlin Legend R6.1
•Merlin Magix 1.0
Note:DEFINITY One and Guestworks are not supported.
Voice mail systems that...

Centralized Voice Mail Via Mode Code B  Private Networking
Administration for Network Connectivity
CID: 77730 555-233-504 — Issue 1 — April 2000
396
Configuration exampleFigure 8 shows what a configuration of centralized voice mail via mode might look 
like.
In this configuration, DEFINITY system A is the hub. Voice mail system X is the 
centralized voice mail system. All other systems in the network are supported by 
voice mail system X except Legend system E and DEFINITY system D. These 
switches do...

Centralized Voice Mail Via Mode Code 
397
Administration for Network Connectivity
555-233-504— Issue 1 — April 2000 CID: 77730
B  Private Networking
Setting Up Centralized Voice Mail Via Mode Code
The following step describe how to set up DEFINITY switches to support centralized 
voice mail. For information on setting up Merlin Legend/Merlin Magix, see Merlin 
Magix Integrated Systems Network Reference, 555-715-114. For information on 
setting up 
INTUITY Messaging Solutions, see INTUITY Messaging...

Centralized Voice Mail Via Mode Code B  Private Networking
Administration for Network Connectivity
CID: 77730 555-233-504 — Issue 1 — April 2000
398
10On page 2, verify fields as follows:
~Leave Word Calling Send a Message field is #90.
~Leave Word Calling Cancel a Message field is #91.
Note:All nodes in the system and the Voice Mail system must match this 
setting
11For each DEFINITY node, enter add ds1UUCSS on the command line, where 
UUCSS is the address of the DS1 circuit pack.
12On page 1, verify...

Centralized Voice Mail Via Mode Code 
399
Administration for Network Connectivity
555-233-504— Issue 1 — April 2000 CID: 77730
B  Private Networking
22On Page 2 of the Station screen, administer or verify the following:
~LWC Reception field is msa-spe
 (Message Server Adjunct-System 
Processing Element).
~Leave Word Calling field is
 y.
~Adjunct Supervision field is 
y.
~Distinctive Audible Alert field is n
.
~Switchhook Flash field is y
.
~LWC Activation field is y
.
23For each remote DEFINITY node,...

Japan TTC Q931-a Private Networking Protocols B  Private Networking
Administration for Network Connectivity
CID: 77730 555-233-504 — Issue 1 — April 2000
400
Japan TTC Q931-a Private Networking Protocols
The Telecommunications Technology Committee (TTC) of Japan defines national standards that are to be used in 
domestic public and private network facilities.  The TTC typically modify other international standards as 
defined by ITU-T for use in Japan with additional national protocols to enhance...