Lucent Technologies DEFINITY Enterprise Communications Server Release 8.2 Administration For Network Connectivity Instructions Manual

DCS over IP Trunk 
441
Administration for Network Connectivity
555-233-504— Issue 1 — April 2000 CID: 77730
F  IP Trunk Installation and
Administration
4  In the dialog box, enter the NT networking computer names for the systems on 
which alerts should be received. For example: ICB189-85, ICB189-14.
Note:Do not specify the IP address of the system. You must specify the NT 
networking computer name. If another person is responsible for LAN 
administration, consider making this a joint activity.
To set up...

DCS over IP Trunk F  IP Trunk Installation and
Administration
Administration for Network Connectivity
CID: 77730 555-233-504 — Issue 1 — April 2000
442
Alert types
IP trunk generates alerts when:
•The IP trunk service stops.
•The DSP card does not respond.
•The Dial Plan has changed.
•The access rules have changed.
•The initialization file (its.ini) is missing.
•The dial/routing plan file (gk.ini) is missing.
Testing AlertsYou can test alerts by generating a “dial plan has changed” alert.
To generate a...

DCS over IP Trunk 
443
Administration for Network Connectivity
555-233-504— Issue 1 — April 2000 CID: 77730
F  IP Trunk Installation and
Administration
Troubleshooting IP trunk
If IP calls are not going through, try these basic procedures before contacting an 
authorized Lucent Technologies Service Center for assistance.
Check the IP trunk 
serviceCheck that the IP trunk service is running. 
1  Go to the Windows NT™ Control Panel
2  Double-click on the Services icon to launch the Services Control...

DCS over IP Trunk F  IP Trunk Installation and
Administration
Administration for Network Connectivity
CID: 77730 555-233-504 — Issue 1 — April 2000
444
Maintaining the performance of the IP trunk server
Follow these guidelines to maintain optimal performance on your IP trunk server. 
•Check that the server has at least 64 MB of RAM installed. 
•Check that the C drive has the following virtual memory allocation:
•Initial Size (MB): 50
•Maximum Size (MB): 750
•Check that the performance boost for the...

DCS over IP Trunk 
445
Administration for Network Connectivity
555-233-504— Issue 1 — April 2000 CID: 77730
F  IP Trunk Installation and
Administration
Configuring Microsoft NetMeeting™ on a PC
After NetMeeting 2.0 is installed, the first time you start it the Configuration Wizard 
prompts you to provide general information. After you provide the general 
information, you must change some audio settings. Procedures for these tasks follow.
Providing general 
information for the 
Configuration WizardThe...

DCS over IP Trunk F  IP Trunk Installation and
Administration
Administration for Network Connectivity
CID: 77730 555-233-504 — Issue 1 — April 2000
446
Changing Audio 
SettingsTo change the audio settings so that NetMeeting operates properly with the IP trunk 
application, follow these steps.
1  From the Tools menu choose Options and then select the Audio tab. The Audio 
tab settings appear as shown in Figure 5.
Figure 11. Audio Tab Settings in Options Dialog Box
2  Click the check box for Enable full...

DCS over IP Trunk 
447
Administration for Network Connectivity
555-233-504— Issue 1 — April 2000 CID: 77730
F  IP Trunk Installation and
Administration
Making Calls to the IP 
trunk application from 
NetMeetingBefore you place a call, make sure the following settings are correct.
•If You Have a LAN Connection:
•Make sure the TCP/IP settings are correct on the client machine. To verify this, 
open an NT command window and ping the IP trunk.
•If You Have a Modem Connection:
Make sure you have the correct...

DCS over IP Trunk F  IP Trunk Installation and
Administration
Administration for Network Connectivity
CID: 77730 555-233-504 — Issue 1 — April 2000
448
2  In the NetMeeting main window, click the Call icon located in the upper left-hand 
corner of the tool bar. 
The New Call dialog box appears.
3  In the Address box, type the phone number you want to call.
Type the number exactly as you dial it from a regular phone. Do not use spaces or 
hyphens between numbers.
If your IP trunk application is configured...

449
Administration for Network Connectivity
555-233-504— Issue 1 — April 2000 CID: 77730
IP Trunk Worksheets 
IP Trunk Worksheets
Worksheet 1: Two Site Solution: Both DEFINITY T1
SITE 1  SITE 2 
Field 
CodeField Name Field Value1A International Access Code
1B Country Code
1C Long Distance Access Code
1D Area Code
1E Exchange
1F ARS Feature Access Code
1G IP Address
1H PBX-to-IP trunk Route Pattern 
Number
1I PBX-to-IP Trunk Group Num-
ber
1J PSTN Trunk Group Number
(for PSTN fallback)
Field 
CodeField...

Administration for Network Connectivity
CID: 77730 555-233-504— Issue 1 — April 2000
450
   IP Trunk Worksheets
Worksheet 2: Two Site Solution: DEFINITY T1 Administration
(No Off-Premise Dialing at Remote Site Only)
SITE 1*Set this value to the total length of the number the user will dial, not 
including ARS feature access code (for example, 9). 
SITE 2 *Set this value to the total length of the number the user will dial, not 
including ARS feature access code (for example, 9). 
PBX Admin If Sites 1 and...