Lucent Technologies DEFINITY Enterprise Communications Server Release 8.2 Administration For Network Connectivity Instructions Manual

Networking Screens 
291
Administration for Network Connectivity
555-233-504— Issue 1 — April 2000 CID: 77730
A  Screens Reference
ISDN TSC Gateway Channel Assignments
This screen is required when the switch is to act as a gateway between a switch that supports the Temporary 
Signaling Connections (TSC) feature and a non-TSC-compatible switch. The gateway provides interface 
protocols necessary for communications to exist between a switch administered with Non-Call Associated TSCs 
in a Signaling Group on...

Networking Screens A  Screens Reference
Administration for Network Connectivity
CID: 77730 555-233-504 — Issue 1 — April 2000
292
Processor ChannelUsed to indicate the processor channel to which the administered NCA-TSC index 
will be mapped. This processor channel is used as another endpoint of the connection 
in this gateway assignment.
ApplicationUsed to indicate the feature this gateway is used for. Gateway channels can be used 
for DCS+ or ISDN-PRI DCS AUDIX feature.Valid entries Usage
1 to 64...

Other Networking-Related DEFINITY Screens 
293
Administration for Network Connectivity
555-233-504— Issue 1 — April 2000 CID: 77730
A  Screens Reference
Other Networking-Related DEFINITY Screens
Communication Interface Links
This screen is display-only starting with Release 7. The fields are now administered on the Data Module screens 
associated with the link. There is one Interface Link screen per System. Interface Links provide a physical 
interface between the system and the other nodes in a DCS,...

Other Networking-Related DEFINITY Screens A  Screens Reference
Administration for Network Connectivity
CID: 77730 555-233-504 — Issue 1 — April 2000
294
Est ConnIf the physical link is over a DS1 interface, it is possible (except for ISDN signaling 
links) for one switch to set up the entire connection (see Destination below). In this 
case, the other switch will not initiate any part of the connection between the two 
endpoints. Typically, when using a DS1 interface, the Enable field is y on both the...

Other Networking-Related DEFINITY Screens 
295
Administration for Network Connectivity
555-233-504— Issue 1 — April 2000 CID: 77730
A  Screens Reference
Data Module - type netcon
Common FieldsSee Common Data Module Fields (256) for descriptions of fields on this screen that 
are not listed below.
Physical ChannelIdentifies the number of the Network Control/Packet Interface data channel 
(identified as a netcon data channel). This field appears only the si models.
Maintenance ExtensionThe extension used...

Other Networking-Related DEFINITY Screens A  Screens Reference
Administration for Network Connectivity
CID: 77730 555-233-504 — Issue 1 — April 2000
296
Abbreviated Dialing 
List 1Specifies the type of abbreviated dialing list. 
Note:See Administrator’s Guide, 555-233-502, for detailed information on 
abbreviated dialing.
Special Dialing OptionIdentifies the type of dialing when this data module originates calls. 
Assigned Member Ext 
and NameDisplay only. Extension and name of a previously administered...

Other Networking-Related DEFINITY Screens 
297
Administration for Network Connectivity
555-233-504— Issue 1 — April 2000 CID: 77730
A  Screens Reference
Data Module - type analog-dm
This type of data module behaves identically to a 2500 set, but it accepts rotary dial pulses.
Common FieldsSee Common Data Module Fields (256) for descriptions of fields on this screen that 
are not listed below.
Abbreviated Dialing 
List 1Specifies the type of abbreviated dialing list. 
Special Dialing OptionIdentifies the...

Other Networking-Related DEFINITY Screens A  Screens Reference
Administration for Network Connectivity
CID: 77730 555-233-504 — Issue 1 — April 2000
298
Extended Trunk Access Call Screening 
This screen allows a set of digit strings to be identified that should not be routed via 
ETA. This screen can also block the routing of certain FACs or TACs. For example, 
if the system administrator were to notice a digit string being mistakenly dialed 
repeatedly that ended up being routed via ETA to a remote PBX...

Other Networking-Related DEFINITY Screens 
299
Administration for Network Connectivity
555-233-504— Issue 1 — April 2000 CID: 77730
A  Screens Reference
Extension Number Portability Numbering Plan
EPN CodeAssign a 3-digit code to translate each 4- or 5-digit UDP extension that is node 
number routed to a 7 digit, AAR-like number used for outpulsing a call within an 
ENP sub network. This field maps each leading digit of a UDP extension to an ENP 
Code or blank
.
 Page 1 of 1...

Other Networking-Related DEFINITY Screens A  Screens Reference
Administration for Network Connectivity
CID: 77730 555-233-504 — Issue 1 — April 2000
300
Hop Channel Assignments Screen
This screen assigns Hop Channels. The maximum number of connections that may be established between 
channels on the system’s interface links varies depending on System configuration. 
Observe the following when assigning hop channels:
•The Link/Chan pair must not be assigned to a local processor channel on the 
Processor...