Lucent Technologies DEFINITY Enterprise Communications Server Release 8.2 Administration For Network Connectivity Instructions Manual

Intuity Translations for DCS AUDIX 
241
Administration for Network Connectivity
555-233-504— Issue 1 — April 2000 CID: 77730
4  Networking Example
Intuity
 Translations for DCS AUDIX
This screen is administered on Intuity, not on the DEFINITY ECS.
CMS Administration
See CentreVu
Ò Call Management System, Software Installation and Setup, 585-215-866 for administration 
procedures for the CMS server.
Switch Interface Administration
Switch Link Type:_LAN
_ Switch:_Definity_____
Extension Length:_4
___...

CMS Administration 4  Networking Example
Administration for Network Connectivity
CID: 77730 555-233-504 — Issue 1 — April 2000
242 

243Administration for Network Connectivity555-233-504 — Issue 1 — April 2000  CID: 77730
A    Screens Reference
This appendix gives detailed field descriptions for a selection of DEFINITY administration 
screens (forms). The screen descriptions are divided into two groups — a) Networking Screens, 
which are needed for network administration and are used in other chapters of this document, 
and b) Other Network-related Screens, which are related to network administration but not 
referred to elsewhere in...

 A  Screens Reference
Administration for Network Connectivity
CID: 77730 555-233-504 — Issue 1 — April 2000
244
Other Network-Related DEFINITY Screens
Communication Interface Links, page 293
Data Modules: netcon, analog-dm, page 295
Extended Trunk Access (ETA) Call Screening, page 298
Extension Number Portability Numbering Plan, page 299
Hop Channel Assignments, page 300
Node Number Routing, page 302
Message Waiting Indication Subscriber Number Prefixes, page 303
Synchronization Plan, page 304
Uniform...

Networking Screens 
245
Administration for Network Connectivity
555-233-504— Issue 1 — April 2000 CID: 77730
A  Screens Reference
Networking Screens
Node Names
In this context, a node is defined as any of the following — a C-LAN port, a bridge or router, a CMS ethernet 
port, or an Intuity AUDIX, or other MSA (Message Server Adjunct) network interface card. The AUDIX and 
MSA node name and IP address must be entered on page 1 of the screen. The data for all other node types, 
including CMS, must be...

Networking Screens A  Screens Reference
Administration for Network Connectivity
CID: 77730 555-233-504 — Issue 1 — April 2000
246
IP AddressThe IP address associated with the node name. (Not needed for X.25 connections).
Pages 2 – 6
NameThe name of the adjunct or switch node. Valid entries are alpha-numeric and/or 
special characters for identification. Default is blank.
IP AddressThe IP address for the node named in the previous field....

Networking Screens 
247
Administration for Network Connectivity
555-233-504— Issue 1 — April 2000 CID: 77730
A  Screens Reference
IP Interfaces 
Use the IP Interfaces screen to define an interface to the LAN from either the C-LAN 
or MedPro circuit packs. The physical interface is port 17 on the C-LAN board and is 
a network interface card on the MedPro. This screen specifies the IP address (via the 
Node Names screen), subnet mask, default gateway address, and the network region 
for each IP interface...

Networking Screens A  Screens Reference
Administration for Network Connectivity
CID: 77730 555-233-504 — Issue 1 — April 2000
248
Enable Eth PtUsed to enable or disable the C-LAN or MedPro IP Ethernet port. 
Ty p eSpecifies the type of circuit pack for the IP network interface (C-LAN or MedPro).
SlotSpecifies the location of the circuit pack for the IP network interface in the standard 
CCcss format (CC = cabinet number, c = carrier letter, ss = slot number). 
CodeDisplay only. Specifies the board code...

Networking Screens 
249
Administration for Network Connectivity
555-233-504— Issue 1 — April 2000 CID: 77730
A  Screens Reference
Subnet MaskThe subnet mask determines which part of an IP address is the network identifier and 
which part is the host identifier. The subnet mask is associated with the IP address 
administered on the Node Names screen for the IP interface identified by the Node 
Names field on this screen.
See Chapter 1 for more information on IP addresses and subnetting.
Gateway...

Networking Screens A  Screens Reference
Administration for Network Connectivity
CID: 77730 555-233-504 — Issue 1 — April 2000
250
Net RgnSpecifies the network region assigned to the IP interface. 
Valid Values Usage
1–10
Default is 1.The Region field on the IP Interfaces screen 
allows you to set up segregated groups of 
MedPro resources. This feature can be used in 
a variety of ways. For example, you could use 
regions to allocate specific MedPro boards to 
H.323 trunks and others to stations; or you...