Lucent Technologies DEFINITY Enterprise Communications Server Release 6 Instructions Manual

DEFINITY Enterprise Communications Server Release 6
Maintenance for R6r Volumes 1 & 2  555-230-126  Issue 2
January 1998
Management Terminal 
Page 3-17 Switch-Based Bulletin Board Message Notification 
3
configuration board X
configuration carrier X
configuration control X
configuration network X
configuration software X
configuration station X
configuration trunk X
console-parameters X
cor X X
cos X
coverage answer-group X X
coverage groups X
coverage path X X
customer-alarmX
data-module X X X X...

DEFINITY Enterprise Communications Server Release 6
Maintenance for R6r Volumes 1 & 2  555-230-126  Issue 2
January 1998
Management Terminal 
Page 3-18 Switch-Based Bulletin Board Message Notification 
3
emergency X
enp-number-plan X
environmentX
errors X
events X
external-device-alarmX
extension-type X
external-device-alarmingX
feature-access-code X
fiber-link
2XX
groups-of-extensions X
hardware-groupXX
healthX
history X
hunt-group X X
inads-linkX
integrated-annc-boards X X
intercom-group X X
interface...

DEFINITY Enterprise Communications Server Release 6
Maintenance for R6r Volumes 1 & 2  555-230-126  Issue 2
January 1998
Management Terminal 
Page 3-19 Switch-Based Bulletin Board Message Notification 
3
login3 X
login-ids X
maintenanceX
marked-port X
mct-group-extensions X
mct-history X
meas-selection coverage X
meas-selection principal X
meas-selection route-pattern X
meas-selection trunk-group X
meas-selection wideband-trunk-grp X
measurements security-violations detail X
measurements...

DEFINITY Enterprise Communications Server Release 6
Maintenance for R6r Volumes 1 & 2  555-230-126  Issue 2
January 1998
Management Terminal 
Page 3-20 Switch-Based Bulletin Board Message Notification 
3
pmsX
pms-down X
pms-linkX
pms-logX
pncX
port X X
port-network
2X
pri-endpoint X X X X
processorX
remote-call-coverage X
report-scheduler X X X
rhnpa X
route-pattern X X
routing-table X X
scrX
second-digit X
security-violations X
set-data X
signaling-group X X X X
sit-treatment X
site-data X
skillX...

DEFINITY Enterprise Communications Server Release 6
Maintenance for R6r Volumes 1 & 2  555-230-126  Issue 2
January 1998
Management Terminal 
Page 3-21 Switch-Based Bulletin Board Message Notification 
3
system X
system 1st-cabinetX
system 2nd-cabinetX
system 3rd-cabinetX
system all-cabinetsX
system conn X
system customer-options X
system features X
system-maintenance X
system-parameters cdr X
system-parameters country-options X
system-parameters duplication
2X
system-parameters hospitality X...

DEFINITY Enterprise Communications Server Release 6
Maintenance for R6r Volumes 1 & 2  555-230-126  Issue 2
January 1998
Management Terminal 
Page 3-22 Switch-Based Bulletin Board Message Notification 
3
1. Intel only.
2. MIPS only.
3. Must be super-user.trunk-group-members X
tsc-administeredX
ttiX
udp X X
unstaffed-agents X
usage button-type hunt-ns X
usage button-type trunk-ns X
usage button-type night-service X
usage-extensions X
usage-hunt X
vdn X X X
vector X X
wakeup incomplete X
wakeup requests X...

DEFINITY Enterprise Communications Server Release 6
Maintenance for R6r Volumes 1 & 2  555-230-126  Issue 2
January 1998
Management Terminal 
Page 3-23 Switch-Based Bulletin Board Message Notification 
3
Table 3-3. Command Permissions Form Entries — Administer Stations
ObjectAction
Add Change Duplicate Remove
abbreviated-dialing 7103A-buttons X X X
abbreviated-dialing enhanced X X X
abbreviated-dialing group X X X
abbreviated-dialing personal X X
abbreviated-dialing system X X X
alias-station X
attendant...

DEFINITY Enterprise Communications Server Release 6
Maintenance for R6r Volumes 1 & 2  555-230-126  Issue 2
January 1998
Management Terminal 
Page 3-24 Connecting the MT 
3
Connecting the MT
The management terminal can be connected to the system in the following ways:
nSYSAM-LCL Port
The management terminal can be connected directly to the SYSAM-LCL 
port of the TN1648 System Access and Maintenance (SYSAM) circuit 
pack in the PPN control carrier (or SPE). Two RS-232 connectors are 
located on the rear...

DEFINITY Enterprise Communications Server Release 6
Maintenance for R6r Volumes 1 & 2  555-230-126  Issue 2
January 1998
Management Terminal 
Page 3-25 Connecting the MT 
3
active SPE, connect an M25B (EIA) cord to the connector labeled ACTIVE. 
Connect the other end to the connector on the 715 BCS labeled P2(DCE). 
On most other terminals, use the connector labeled MAIN PORT. A null 
modem is not required for these ports. More information on setting up the 
715 BCS is given in following sections of this...

DEFINITY Enterprise Communications Server Release 6
Maintenance for R6r Volumes 1 & 2  555-230-126  Issue 2
January 1998
Management Terminal 
Page 3-26 Logging On 
3
nStandby SPE Connection
With duplicated SPEs, there are two SYSAM connectors on each PPN 
control carrier (A and B). Either carrier’s connectors may be used. Either 
ACTIVE connector always access the active SPE regardless of which 
carrier is active. Either STANDBY connector accesses the standby SPE 
through the SPE-Down interface. This...