Lucent Technologies Definity Application Notes For Type Approval Manual

DEFINITY® Enterprise Communications Server Application Notes 
for Type Approval    Issue 1
June 1999
Application Notes for Type Approval 
293 Japan 
Luc c ent rec ommend s only the following  c all typ es b e used  outsid e North 
Americ a:
System Parameter Administration
Only those feature-related  p arameters that may have a Typ e Ap p roval or b asic  
c onnec tivity imp lic ation for a p artic ular c ountry are listed  here.
n Feature-Related  System Parameters Ad ministration
— Trunk-to-Trunk...

DEFINITY® Enterprise Communications Server Application Notes 
for Type Approval    Issue 1
June 1999
Application Notes for Type Approval 
294 Japan 
nUp p er Bound : 1000 ms 
nLower Bound : 200 ms 
nCountry Op tions Parameters
— Comp and ing  Mode: mu-law
— Base Tone Generation Set: 3
— Tone Detec tion Mod e: d efault
— Interdigit Pause: default
— Dig ital Loss Plan: 3
— Analog Ringing Cadence: 3
Analog Trunk Administration
nCO Trunks
— Trunk Group  Sc reen
nGroup  Typ e: CO 
nCountry Code: 3
nTrunk...

DEFINITY® Enterprise Communications Server Application Notes 
for Type Approval    Issue 1
June 1999
Application Notes for Type Approval 
295 Japan 
nDisc onnec t Sup ervision - Out: Selec tion is c ustomer’s 
choice.
nDisc onnec t Timing : 500 msec  (This field  will not b e used  with 
CPs that c an ac c ep t the Inc oming  Disc onnec t and  Outg oing  
Disc onnec t timers. Set these latter two timers from the 
Ad ministrab le Timers Sc reen.)
— Trunk Group  Ad ministration Sc reen (Timing )
Set the...

DEFINITY® Enterprise Communications Server Application Notes 
for Type Approval    Issue 1
June 1999
Application Notes for Type Approval 
296 Japan 
nInc oming  Dial Typ e: tone
nTrunk Type: loop -start
nTrunk Termination: rc  (c omp lex imp ed anc e)
nDisc onnec t Sup ervision: no
nDisc onnec t Timing : 500 msec  (This field  will not b e used  with 
CPs that c an ac c ep t the Inc oming  Disc onnec t and  Outg oing  
Disc onnec t timers. Set these latter two timers from the 
Ad ministrab le Timers Sc...

DEFINITY® Enterprise Communications Server Application Notes 
for Type Approval    Issue 1
June 1999
Application Notes for Type Approval 
297 Japan 
nDID Trunks
Not availab le in this c ountry.
nTi e  Tru n k s
— Non-ISDN Sig naling  Examp le (DS1 Ad ministration Sc reen)
nCirc uit Pac k: TN464D (or TN464C,TN767)
nBit Rate: 1.544
nInterfac e Comp anding : mu-law
nLine Cod ing: B8ZS
nLine Comp ensation: 1
nFraming Mode: esf
nSignaling Mode: common-chan
nCountry Protoc ol: 1
nCRC?: no
nId le Cod e:...

DEFINITY® Enterprise Communications Server Application Notes 
for Type Approval    Issue 1
June 1999
Application Notes for Type Approval 
298 Japan 
nCountry Protoc ol: 1
nConnec t: p b x
nInterfac e: user 
nCRC: No
nId le Cod e: 11111111 
— DS1 Ad ministration sc reen
nCirc uit Pac k: TN2242
nInterfac e Comp anding : mu-law
nLine Cod ing: c mi
nSignaling Mode: isdn-pri
nCountry Protoc ol: 3
nConnec t: p b x
nInterfac e: user 
nId le Cod e: 11111111
nD-Channel: 1-3D (must matc h Sig naling  Group  sc...

DEFINITY® Enterprise Communications Server Application Notes 
for Type Approval    Issue 1
June 1999
Application Notes for Type Approval 
299 Japan 
nFraming Mode: esf
nSignaling Mode: isdn-pri
nCountry Protoc ol: 3
nConnec t: Network
nDMI-BOS? Yes 
nId le Cod e: 11111111 
— Sig naling  Group  sc reen
nAssoc iated Sig naling : Yes
nPrimary D_Channel: xxxx16 (xxxx= > dep end s on CP 
p hysical location)
— Trunk Group  Ad ministration sc reen
nGroup Type: isdn-pri
nService Type: public_ntwrk
2Mbit Trunk...

DEFINITY® Enterprise Communications Server Application Notes 
for Type Approval    Issue 1
June 1999
Application Notes for Type Approval 
300 Japan 
nM a k e  ( m s e c ):  3 5  ( w h e n  t h e  PPS f ie ld  is  1 0 ),  1 5  ( w h e n  t h e  PPS f ie ld  
is 20)
nBreak (msec ): 65 (when the PPS f i e ld  i s 1 0 ) ,  3 5  ( w h e n  t h e  PPS f ie ld  
is 20)
nOutg oing  Disc onnec t (msec ): 100
nOutg oing  Glare Guard  (msec ): 800 or hig her
nOutg oing  Rotary Dial Interd igit (msec ): 800
nOutg...

DEFINITY® Enterprise Communications Server Application Notes 
for Type Approval    Issue 1
June 1999
Application Notes for Type Approval 
301 Japan 
Detailed Description
In the US, the CO send s b oth c alling  p arty name and  numb er, if they are 
availab le; in Jap an, the CO send s only the c alling  p arty numb er.
Disp lay of c alling party information works with all DEFINITY ECS d igital voic e 
terminals (DCP and  BRI) eq uip p ed  with a 40-c harac ter or 32-c harac ter 
alphanumeric  d isp lay....

DEFINITY® Enterprise Communications Server Application Notes 
for Type Approval    Issue 1
June 1999
Application Notes for Type Approval 
302 Japan 
nCall Coverag e
Called Princip al’s Disp lay — The called  p rinc ip al’s d isp lay shows the 
c alling  p arty’s id entity until the c overag e p arty answers the c all. If the 
coverage party answers the call, the principal’s station display becomes 
b lank. If the c alled  p rinc ip al temp orarily b rid g es in after the c overag e 
p arty answers the c...