Lucent Technologies Centrevu Report Designer Version 8 User Guide

  Format | Chart CentreVu Report Designer Version 8 User Guide
Type Tab12-21
l% Axis check box — causes the value axis (y-axis) to be displayed 
as percentages rather than as actual data values. This can be 
combined with the stacked check box to produce a percentage 
stacked chart.
Using the Type 
Ta b
12
To use the Type tab, complete the following steps:
1. Select the 2D or 3D radio button, based on whether you would like 
the report to display two-dimensionally or three-dimensionally.
2. Select the...

  Format | Chart CentreVu Report Designer Version 8 User Guide
3D Effects Tab12-22
3D Effects Tab12
The 3D Effects tab allows you to control the 3D appearance of the chart. 
If the current chart is a 2D chart, this tab is disabled. 
3D Effects Tab 
Options
12
The following parameters can be changed:
lElevation — This is a number from 0 through 90 degrees, and 
describes the relative height from which a chart is viewed. An 
elevation of 90 looks directly down on the top of the chart, while an 
elevation...

  Format | Chart CentreVu Report Designer Version 8 User Guide
3D Effects Tab12-23
lProjection — This selects one of three mathematical algorithms 
used to give a 3D appearance on a 2D sheet of paper or computer 
screen. The following values can be chosen:
—Oblique: The chart has depth but the X-Y plane does not 
change when the chart is rotated or elevated.
—Orthogonal: Perspective is not applied to the chart, resulting in 
less of a 3D effect. The advantage of using this type of 
projection is that...

  Format | Chart CentreVu Report Designer Version 8 User Guide
3D Effects Tab12-24
lWidth to Height — This is a number from 5 through 2000 that 
represents the percentage of the chart’s height that is used to draw 
the chart’s width.
lDepth to Height — This is a number from 5 through 2000 that 
represents the percentage of the chart’s height that is used to draw 
the chart’s depth.
Using the 3D 
Effects Tab
12
To use the 3D Effects tab, complete the following steps:
1. Change the degree of Elevation (top...

  Format | Table CentreVu Report Designer Version 8 User Guide
Introduction13-1
13  Format | Table
Introduction13
The Report Designer allows you to format report tables after they have been 
inserted on the report. You will use the Table option from the Format menu 
to edit tables on your designer reports. 
This chapter teaches you to use the Format | Table menu option. The 
sections of this chapter are as follows:
lFormatting a Table in a Report
lGeneral Tab
lData Tab
lFonts Tab
lFormat Tab
lHeaders...

  Format | Table CentreVu Report Designer Version 8 User Guide
Formatting a Table in a Report13-2
Formatting a Table in a Report13
The changes you make to a report’s format affect only your view of the 
report. The changes do not affect how other Supervisor users see the 
report.
If you are in a report containing a table (table), you can format how the 
table is displayed and what is displayed on the table. The formatting is 
done in the Table Format Options window, which is accessed by doing 
the...

  Format | Table CentreVu Report Designer Version 8 User Guide
General Tab13-3
General Tab13
The General tab allows you to make format changes to a table.
General Tab 
Options
13
The following table parameters can be changed:
lShow Gridlines — This specifies whether grid lines are to be 
shown in the table.
lFixed Columns — This specifies the number of columns from the 
left of the table that are fixed in place and do not scroll. Valid values 
are in the range of 0 through 99. You can use the spin boxes...

  Format | Table CentreVu Report Designer Version 8 User Guide
General Tab13-4
Using the 
General Tab
13
To use the General tab, complete the following steps:
1. Select the Show Gridlines check box if you want the table to 
include lines between the columns and rows.
2. In the Fixed Region box, define the number of Columns on the 
table that will not scroll. You can type the appropriate number or use 
the up and down arrows to select a valid number.
3. In the Fixed Region box, define the number of Rows...

  Format | Table CentreVu Report Designer Version 8 User Guide
Data Tab13-5
Data Tab13
Use the Table Format Data tab to add data items to, remove data items 
from, and to reorganize the order of data items on the currently selected 
table.
Data Tab Options13lAvailable Data — Lists all of the data items that are available, 
based on the query that is being used, for the chart or table.
lData on Table — Displays the data items that are currently used in 
the table.
Using the Data 
Ta b
13
To use the Data...

  Format | Table CentreVu Report Designer Version 8 User Guide
Fonts Tab13-6
Fonts Tab13
The Table Format Options Fonts tab allows you to edit the fonts of the 
data, headers, and summary information on the table report.
Fonts Tab 
Options
13
lFonts — Lists all of the available report items for which you can edit 
the fonts.
lChoose Font — Takes you to the Font selector window, where you 
can edit the font size and style for each type of text.