Lucent Technologies Audix Administration And Data Acquisition Guide

AUDIX Administration and Data Acquisition Package  585-302-502  Issue 14
May 1999
Command Line Database Retrieval Commands 
12-105 getperf 
12
Th e  INTUITY and  DEFINITY AUDIX System uses the following  format:
 
label,PONESECOND,underflow(unused),0-1,1-2,...,8-9,
9-10,overflow (>10) 
The d ata is initialized  to zero at the beg inning of eac h hour on I
NTUITY and 
DEFINITY AUDIX System, and  on a reb oot on an R1 AUDIX System, and  
eac h is inc remented c ontinuously. 
The DEFINITY AUDIX System...

AUDIX Administration and Data Acquisition Package  585-302-502  Issue 14
May 1999
Command Line Database Retrieval Commands 
12-106 getperf 
12
— M e s s a g e  D e le t e d  I n t e r v a l ( PF_D EL _H I ST, PON ESEC O N D )  i s a  
histog ram of the time from a user p ressing 
*D to d elete a messag e 
until the announc ement 
deleted b eg ins to p lay out. 
— Queue-Mail Interval (PF_Q_MAIL_STATS,PTSTAT) are statistic s on 
the time from when a user sending  a messag e g ives the final 
instruc tions...

AUDIX Administration and Data Acquisition Package  585-302-502  Issue 14
May 1999
Command Line Database Retrieval Commands 
12-107 getperf 
12
— Network Messag e Delivery Time (PF_DD_STATS) are statistic s on 
the time to d eliver a networked  message.
— Network Messag e Delivery Time (PF_DD_HIST) is a histog ram of 
the time it takes to d eliver a networked  message.
The histog ram has 20 b uc kets that are org anized  ac c ord ing  to d elivery d elay 
intervals as shown b elow:
Buc kets 1 -12: 5...

AUDIX Administration and Data Acquisition Package  585-302-502  Issue 14
May 1999
Command Line Database Retrieval Commands 
12-108 getperf 
12
— (PF_UNDEL_HIST) a histog ram of the time between p ressing  
#
 to 
ap p rove a messag e and  hearing  the next announc ement. 
— (PF_VM_MSG_LGTH_STATS) statistic s on the leng th of voic e mail 
messag es.
— (PF_VM_MSG_LGTH_HIST) a historogram of the leng th of voic e 
mail messages. Eac h buc ket represents 30 seconds. 
— (PF_CA_MSG_LGTH_STATS) statistics on...

AUDIX Administration and Data Acquisition Package  585-302-502  Issue 14
May 1999
Command Line Database Retrieval Commands 
12-109 getperf 
12
The only other d ata that ap p ear in the outp ut file for the R1 AUDIX System 
after using  the getperf
 c ommand  is one line ind ic ating  the d ate and  time 
of d ay when the data are retrieved and  one line ind ic ating  the time sinc e 
the system last restarted  in d ays, hours, and  minutes. 
nLAN Traffic  Data
The following  d ata is c ollec ted  ab out...

AUDIX Administration and Data Acquisition Package  585-302-502  Issue 14
May 1999
Command Line Database Retrieval Commands 
12-110 getperf 
12
nMFB Oc c up anc y 

MFB_OCCUPANCY
,
CPU_DATA
,24.1,19.4,18.9,15.9,22.3,26.2,13.0, 
14.72,16.4,10.8,11.3 
nFP/ VSP O c c u p a n c y 

FP_OCCUPANCY
,
CPU_DATA
,19890809,1700,39.0,36.0,33.0,28.7, 
26.2, 29.6,26.2, 20.2,etc . 
nDBP Oc c up anc y 

DBP_OCCUPANCY
,
CPU_DATA
,19940809,1730,50.6,31.0,47.5,36.5,
53.7,49.8,48.2,41.2,38.0,37.3,51.0,49.4 
nCPU Oc c up anc y...

AUDIX Administration and Data Acquisition Package  585-302-502  Issue 14
May 1999
Command Line Database Retrieval Commands 
12-111 getralar 
12
12getralar
Get resolved  alarm d ata 
Syntax 
getralar   
[-d mmddyy [-t hhmm]] [-c fault/alarm c od e] [-M
 y/n] [-m y/n] 
[-W
 
y/n] [-T resourc e-typ e [-L location]] [-n nnnn] [-u unit] 
[-l 
level] [-p nn] [-r release] [-A ap p lication] [-v
] [-w
] [-V
] [> ofile] 
Description 
This c ommand  retrieves all p ag es of the following sc reens for the searc h...

AUDIX Administration and Data Acquisition Package  585-302-502  Issue 14
May 1999
Command Line Database Retrieval Commands 
12-112 getralar 
12
hhmm Retrieves errors from the sp ec ified  hour and  minute to the c urrent 
time. For examp le, if you enter 1512
 at 6:00 p .m. (for retrieval on 
the same d ay), the d ata from 3:12 p .m. to 6:00 p .m. is retrieved . 
Midnight is represented by 0000.
-T
Resourc e typ e; flag  must b e followed  with 
resource-typ e. This 
argument is valid only for the I...

AUDIX Administration and Data Acquisition Package  585-302-502  Issue 14
May 1999
Command Line Database Retrieval Commands 
12-113 getralar 
12
-l
Severity level numb er; flag  must b e followed  b y level. This flag  is 
availab le only for R1 AUDIX systems.
level Retrieves alarms logg ed  with the severity level you sp ec ify (0 =  
major, 1 =  minor, and  2 =  warning ). 
-c
Fault/alarm c od e number flag; must b e followed  b y 
fault/alarm 
code
. 
fault/alarm 
codeRetrieves alarms logg ed  with the...

AUDIX Administration and Data Acquisition Package  585-302-502  Issue 14
May 1999
Command Line Database Retrieval Commands 
12-114 getralar 
12
Errors 
If no resolved  alarms exist that fit the spec ified  searc h, no output is written. 
!CAUTION:
The following caution applies only to R1 AUDIX Systems: 
If operators on the loc al maintenanc e terminal (LMT) and  the loc al ad minis-
tration terminal (LAT) c onc urrently ac c ess the same sc reen information, out-
p ut on either terminal c ould  p...