Lucent Technologies Audix Administration And Data Acquisition Guide

AUDIX Administration and Data Acquisition Package  585-302-502  Issue 14
May 1999
Command Line Database Retrieval Commands 
12-65 getload 
12
38 port 26 usag e in sec ond s N 6D-r1.0+
39 port 27 usag e in sec ond s N 6D-r1.0+
40 port 28 usag e in sec ond s N 6D-r1.0+
41 port 29 usag e in sec ond s N 6D-r1.0+
42 port 30 usag e in sec ond s N 6D-r1.0+
43 port 31 usag e in sec ond s N 6D-r1.0+
44 port 32 usag e in sec ond s N 6D-r1.0+
45 port 1 p eg  c ount N 6D-r1.0+
46 port 2 p eg  c ount N 6D-r1.0+
47...

AUDIX Administration and Data Acquisition Package  585-302-502  Issue 14
May 1999
Command Line Database Retrieval Commands 
12-66 getload 
12
Example
The following c ommand retrieves the DEFINITY AUDIX List Measurements Load  
Day sc reen d ata for January 3, 1995, writes a summary of the transfer statistic s 
to the sc reen, and  writes outp ut to a file named  d ayload s.
getload -f day -d 010395 -v > dayloads 
The following data is written to the file:...

AUDIX Administration and Data Acquisition Package  585-302-502  Issue 14
May 1999
Command Line Database Retrieval Commands 
12-67 getlog 
12
getlog
Get ac tivity log  d ata 
Syntax 
getlog
 [-a
 y/n] -e
 nnnnnnnnnn [-d
 mmddyy [-t hhmm]] 
[-s
 mmddyy [-h
 hhmm]] [-n
 nn] [-r
 release] [-v
] [-w
] [-V
] [> ofile] 
Description 
This c ommand  retrieves d ata for the following sc reens for starting  and  end ing  
d ate, starting  and  end ing  time, and  extension that you sp ec ify: 
nINTUITY AUDIX  Disp...

AUDIX Administration and Data Acquisition Package  585-302-502  Issue 14
May 1999
Command Line Database Retrieval Commands 
12-68 getlog 
12
-d
Starting  d ate flag ; must be followed  b y mmdd yy. 
mmdd yy Retrieves d ata starting  at the month, d ay, and  year ind ic ated  b y 
mmdd yy. 
-t
Starting  time flag ; must b e followed  b y 
hhmm. This flag  is only 
availab le if the -d
 flag  is also used . 
hhmm Retrieves d ata starting  from the hour and  minute of the day that 
you have specified...

AUDIX Administration and Data Acquisition Package  585-302-502  Issue 14
May 1999
Command Line Database Retrieval Commands 
12-69 getlog 
12
Errors 
If the ac tivity log  was ac tivated  then deac tivated , only the data p rior to the 
d eac tivation date/time is availab le. This is sub jec t to the numb er of entries that 
the system ac tivity log  hold s, as spec ified on the I
NTUITY or DEFINITY AUDIX 
Systems Disp lay System-Parameters Ac tivity-Log  sc reen or on the R1 AUDIX 
system : limits  sc...

AUDIX Administration and Data Acquisition Package  585-302-502  Issue 14
May 1999
Command Line Database Retrieval Commands 
12-70 getlog 
12
Example 
The following c ommand retrieves the INTUITY or DEFINITY AUDIX Disp lay 
Ac tivity-Log sc reen d ata for extension 3101 for Novemb er 22, 1994, and  writes 
output to a file named  ac tlog . 
getlog -e 3101 -d 112294 -s 032294 > actlog 
The following data is written to the file, one line for eac h ac tivity: 
19941122,1822,log-in,message counts: new=0,...

AUDIX Administration and Data Acquisition Package  585-302-502  Issue 14
May 1999
Command Line Database Retrieval Commands 
12-71 getmaint 
12
getmaint
Get maintenanc e log  d ata 
Syntax 
getmaint
 [-d mmddyy [-t hhmm]] [-c
 event id] [-f search string] [-A
 ap p lic ation]  
[-a
 
alarm resolution] [-E
 errors] [-e
 events] [-R rep orting -resourc e-typ e]                 
[-T 
resourc e-typ e [-L loc ation]] [-n nnnn] [-r release] [-v
] [-w
] [-V
] 
[
> ofile] 
Description 
This c ommand  retrieves...

AUDIX Administration and Data Acquisition Package  585-302-502  Issue 14
May 1999
Command Line Database Retrieval Commands 
12-72 getmaint 
12
-f
Searc h string  flag ; must b e followed  b y searc h string. 
searc h 
stringRetrieves errors c ontaining  the searc h string  you specify. The 
maximum string  leng th for I
NTUITY AUDIX Systems is 78 c harac ters. 
-A
Ap p lic ation flag ; must b e followed  with 
ap p lication. 
ap p lic ation Retrieves only rec ord s logg ed  ag ainst this ap p lic ation...

AUDIX Administration and Data Acquisition Package  585-302-502  Issue 14
May 1999
Command Line Database Retrieval Commands 
12-73 getmaint 
12
Errors 
If no errors matc h the sp ec ified  searc h, no outp ut is written. 
Output Format
Outp ut for the getmaint
 c ommand  is formatted  as follows. -v
Writes transfer statistic s to the sc reen at the end  of the transfer. 
Pressing  v
 while the c ommand  is exec uting  send s the up d ated  
transfer status to the sc reen. 
-w
Writes a one-line summary of...

AUDIX Administration and Data Acquisition Package  585-302-502  Issue 14
May 1999
Command Line Database Retrieval Commands 
12-74 getmaint 
12
Example 
The following c ommand retrieves the INTUITY AUDIX Disp lay Events d ata from 
12:25 p .m. on Sep temb er 14, 1994, to the hour and  minute the c ommand  was 
entered , writes a summary of the transfer statistic s to the sc reen, and writes 
output to a file named  errors. 
getmaint -d 091494 -t 1225 -v > errors 
The following data is written to the file:...