LG Projector PH300 User Manual
Here you can view all the pages of manual LG Projector PH300 User Manual. The LG manuals for Projector are available online for free. You can easily download all the documents as PDF.
Page 31
31USING THE PROJECTOR Using the projector 1 When in standby mode, press the POWER button to turn the projector on. 2 Press the INPUT button and select the input signal you want. 3 Control the projector using the following buttons while watching the screen. ButtonDescription CH ,Changes the TV channel. LISTDisplays the channel list. 0 - 9Enters a channel number. VOL +, -Adjusts the volume level. MUTE Mutes the sound from the projector. Q.MENUEnters the quick menu. (See page 38) FLASHBKDisplays the channel...
Page 32
![Page 32
32USING THE PROJECTOR
Setting Channel
Image shown may differ from your projector.
Saving Currently Broadcasting Channel
Using the Auto Tuning function
Saves a channel which is currently broadcasting. Be sure to activate Auto Tuning when you move to a new home or change the position of your projector. When you activate this function, make sure that the antenna i\
s connected and there are channels broadcasting signals.
1 Press the SETTINGS button.
2 Press the , , , or button to select CHANNEL and...](http://img.usermanuals.tech/thumb/47/99869/w300_projector_manual_8596_d-31.png "Page 32
32USING THE PROJECTOR
Setting Channel
Image shown may differ from your projector.
Saving Currently Broadcasting Channel
Using the Auto Tuning function
Saves a channel which is currently broadcasting. Be sure to activate Auto Tuning when you move to a new home or change the position of your projector. When you activate this function, make sure that the antenna i\
s connected and there are channels broadcasting signals.
1 Press the SETTINGS button.
2 Press the , , , or button to select CHANNEL and...")
32USING THE PROJECTOR Setting Channel Image shown may differ from your projector. Saving Currently Broadcasting Channel Using the Auto Tuning function Saves a channel which is currently broadcasting. Be sure to activate Auto Tuning when you move to a new home or change the position of your projector. When you activate this function, make sure that the antenna i\ s connected and there are channels broadcasting signals. 1 Press the SETTINGS button. 2 Press the , , , or button to select CHANNEL and...
Page 33
33USING THE PROJECTOR Editing Your Channel List 1 Press the SETTINGS button. 2 Press the , , , or button to select CHANNEL and press the OK button. 3 Press the , button to select Channel Edit and press the OK button. 4 Edit a channel by using the buttons below.  0026004B0044005100510048004F000300280047004C0057 000300030024005100570048005100510044 00330044004A0048000300140012 001600100014 001800100014001A00100014 002700370039 00370039002600440045004F00480003002700370039...
Page 34
34USING THE PROJECTOR Favorite Channel Setup 1 Press the SETTINGS button. 2 Press the , , , or button to select CHANNEL and press the OK button. 3 Press the , button to select Channel Edit and press the OK button. 4 Move to your desired channel. 5 Press the FAV button to access the Set as Favorite. 6 Press the , buttons to to scrolls through channel group. 7 Press the OK button.  003600480057000300440056000300290044005900520055004C0057004800360048004F004800460057 00300058004F0057...
Page 35
35USING THE PROJECTOR Additional Options Adjusting Aspect Ratio 1 Press the Q.MENU button. 2 Press the , buttons to select Aspect Ratio and press the OK button. MenuDescription 16:9Resizes images to the 16:9 ratio. Just Scan Displays video images in the original size without removing parts of the edge of the image. • If you select Just Scan, you may see image noises at the edge or edges of the screen. Set By ProgramDisplays images in the same aspect ratio as the original image. 4:3Resizes images to the...
Page 36
![Page 36
36USING THE PROJECTOR
Using the Keystone Function
To prevent the screen image from becoming trapezoidal, Keystone adjusts the top and bottom width of the image if the projector is not se\
t up at a right angle to the screen.
Because the Keystone function may cause inferior screen image quality, use this function only when it is not possible to set up the projector a\
t an optimal angle.

0003000306120003002E0048005C00560057000300130701002F0003003506FD
0026004F005200560048
1 Press the SETTINGS button.
2...](http://img.usermanuals.tech/thumb/47/99869/w300_projector_manual_8596_d-35.png "Page 36
36USING THE PROJECTOR
Using the Keystone Function
To prevent the screen image from becoming trapezoidal, Keystone adjusts the top and bottom width of the image if the projector is not se\
t up at a right angle to the screen.
Because the Keystone function may cause inferior screen image quality, use this function only when it is not possible to set up the projector a\
t an optimal angle.

0003000306120003002E0048005C00560057000300130701002F0003003506FD
0026004F005200560048
1 Press the SETTINGS button.
2...")
36USING THE PROJECTOR Using the Keystone Function To prevent the screen image from becoming trapezoidal, Keystone adjusts the top and bottom width of the image if the projector is not se\ t up at a right angle to the screen. Because the Keystone function may cause inferior screen image quality, use this function only when it is not possible to set up the projector a\ t an optimal angle.  0003000306120003002E0048005C00560057000300130701002F0003003506FD 0026004F005200560048 1 Press the SETTINGS button. 2...
Page 37
37USING THE PROJECTOR Selecting an Input Label Displays which devices are connected to which input ports.  002C00510053005800570003002F004400450048004F 002B00270030002C 0026004F005200560048 1 Press the INPUT button on the remote control to display the input selection screen. 2 Use the Red button. 3 Use the or button to select one of the input labels. Blank Function Using the Blank Function This function may be effective when you need to draw attention during a meeting or training. 1 Press the BLANK...
Page 38
38USING THE PROJECTOR Selecting the background color of the blank image 1 Press the SETTINGS button. 2 Press the , , , or buttons to select OPTION 2 and press the OK button. 3 Press the , buttons to select Blank Image and press the OK button. 4 Press the or button to move to the setting or option you want and press the OK button. Using the Quick Menu You can easily customize your frequently used menus. 1 Press the Q.MENU button. 2 Press the or button to select a menu and press OK button....
Page 39
39MY MEDIA MY MEDIA Before Using Connecting a USB Device Connect a USB device (external HDD, USB memory) to the USB port of projector to enjoy the content files stored in the USB device with your projector. You cannot write or delete data in the USB device. Connect a USB flash drive as shown below. USB flash Drive Removing a USB Device 1 Press the Q.MENU button. 2 Use the or button to move to USB Device and press the OK button. 3 Select a USB to remove. Wait for confirmation that the USB device has...
Page 40
40MY MEDIA Tips for using a USB device • If the USB storage device has a built-in auto recognition program or uses its own driver, it may not work. • Some USB storage devices may not work or may work incorrectly. • If you use a USB extension cable, the USB device may not be recognized or may not work properly. • Use only USB storage devices formatted with the Windows FAT32 or NTFS file system. • For external USB HDDs, it is recommended that you use devices with a rated voltage of less than 5 V and a...